Aesculap Clipper Blade Favorita 3,0 mm, GT754 (fine teeth)

Aesculap Clipping head Favorita

Recognized quality for professional use - 100% made in Germany

Due to the special Aesculap-Carbon-Steel the Favorita shear heads have a significantly higher cutting capacity than conventional cutting sets. The good processing quality of the Aesculap CNC manufacturing centers guarantees a consistently high quality. The top and bottom plates of the Aesculap shear heads are milled and profile ground. The high-end surface finishing ensures a high level of corrosion protection. This makes the cutting sets very durable, can be ground several times and optimally suited for professional use in the dog grooming or veterinary sector.

Care instructions:

To ensure optimal life of the shaving head, regular and proper care is important. Clean the cutting plates with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly.

After drying, oil the moving parts of the shearing heads with special shearing machine oil (gt604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutesto oil. Put 3 drops of oil on the teeth and 2 drops between the teeth. For oiling between the clipper blades is also very good oil spray with a tube as an attachment. This creates even more pressure and the oil is better distributed between the blades.

After oiling, let the machine idle for a few seconds to allow the oil to distribute well and not transfer to the animal's hair. With proper maintenance and care, the durability of the shearing heads can be increased by up to 20%. Also the regrinding can be delayed.

Overview:

• Aesculap-Carbon-Steel
• Very long cutting ability
• Multiple regrindable
• High processing quality due to Aesculap CNC machining centers
• All parts are milled and profile ground
• High-end surface finishing
• High corrosion protection
• Made in Germany

Suitable for the following clippers, among others:

• Aesculap Favorita II
• Aesculap Favorita CL
• Aesculap Favorita CLi
• Aesculap Libra
• Aesculap Speed
• Aesculap Elektra II
• Aesculap Ehmann turbo-line

Cutting length:

• GH700, 0,05 mm
• GH703, 0,1 mm
• GH712, 1,0 mm
• GH715, 2,0 mm (short teeth)
• GT710, 1,8 mm
• GT730, 0,5 mm
• GT736, 1,0 mm (coarse teeth)
• GT742, 2,0 mm (long teeth)
• GT746, 1,5 mm (coarse teeth)
• GT748, 3,0 mm (coarse teeth)
• GT749, 2,8 mm (wide)
• GT754, 3,0 mm (fine teeth)
• GT758, 5,0 mm
• GT770, 7,0 mm
• GT772, 0,7 mm (for face and paws)
• GT779, 9,0 mm
• GT782, 12,0 mm
• GT784, 16,0 mm