ELMAG

Elmag Power take-off Generator SEZN 27WD ELMAG power take-off generator for tractors - the low-cost and low-maintenance solution for your agriculture and forestry. The power take-off generator produces quality electricity with the PTO drive of a tractor. It is an ideal supply solution for agriculture, forestry, horticulture, construction and municipal enterprises for external operation of electric machines, water and lifting pumps, motors of construction machines, conveyor belts, hay blowers, etc. The power take-off generator also serves as an Emergency generator for house and farm, cold storage rooms, milk cooling, milking, butter, feeding and heating systems and much more. The PTO generator is equipped with an AVR Control, for powering hard-to-start motors and electronic consumers (e.g. milking robots, etc.). It offers a simple and safe switching from field operation (with direct connection of the consumers) to house operation (with feeding into the house network). Insulation monitoring is activated during field operation and deactivated during domestic operation. You have full control from the tractor thanks to large analog displays for voltage, amperage, current frequency and operating hours counter. Thanks to IP 44 protection class and insulation monitoring installed as standard insulation monitoring the power take-off unit can also be used in damp environments or in the rain. The use of a grounding spike is not required. The insulation monitoring and the emergency stop also provide high protection against electric shock due to insulation faults or short circuit. The highest protection of sensitive loads against over- and undervoltage is provided by the adjustable voltage monitoring. The tolerance ranges min/max ±1-18% and an alarm time range of 1-10s are adjustable via a speed controller. If the limits are exceeded, the current is automatically switched off. The extremely robust unit, protected all around with a tubular frame, is equipped with a three-point suspension for quick attachment to the power lift of tractors. Equipment: Connections 230V: 2x Schuko 16A Connections 400V: 1x CEE 16A-5p, 1x CEE 32A-5p, 1x CEE 63A-5p Emergency stop shutdown Shutdown in case of overload Short circuit THM-SS disconnection Insulation monitor Voltage monitoring Voltmeter Hertzmeter Hour meter Three-point hitch Power take-off protection Technical data: Voltage - frequency: 400 / 230/50 V/Hz Maximum power 3~400V: 29,70 kVA Continuous power 3~400V: 27 kVA Maximum power 1~230V: 9,90 kVA Continuous power 1~230V: 9 kVA Min. tractor power: 70 hp PTO Speed: 430 rpm Generator speed: 1500 rpm Voltage control: AVR Shutdown: Not Stop Dimensions (LxWxH): 1135 x 915 x 1400 mm Weight (without fuel): 245 kg Protection class: IP 44 Scope of delivery: 1x Elmag Power take-off Generator SEZN 27WD

Elmag Power take-off Generator SEZN 38WD ELMAG power take-off generator for tractors - the low-cost and low-maintenance solution for your agriculture and forestry. The PTO generator is expected to be available from 01.02.2023 (pre-order possible). If you have any questions about delivery and pre-ordering, please contact our customer service. The power take-off generator produces quality electricity with the PTO drive of a tractor. It is an ideal supply solution for agriculture, forestry, horticulture, construction and municipal enterprises for external operation of electric machines, water and lifting pumps, motors of construction machines, conveyor belts, hay blowers, etc. The power take-off generator also serves as an Emergency generator for house and farm, cold storage rooms, milk cooling, milking, butter, feeding and heating systems and much more. The PTO generator is equipped with an AVR Control, for powering hard-to-start motors and electronic consumers (e.g. milking robots, etc.). It offers a simple and safe switching from field operation (with direct connection of the consumers) to house operation (with feeding into the house network). Insulation monitoring is activated during field operation and deactivated during domestic operation. You have full control from the tractor thanks to large analog displays for voltage, amperage, current frequency and operating hours counter. Thanks to IP 44 protection class and insulation monitoring installed as standard insulation monitoring the power take-off unit can also be used in damp environments or in the rain. The use of a grounding spike is not required. The insulation monitoring and the emergency stop also provide high protection against electric shock due to insulation faults or short circuit. The highest protection of sensitive loads against over- and undervoltage is provided by the adjustable voltage monitoring. The tolerance ranges min/max ±1-18% and an alarm time range of 1-10s are adjustable via a speed controller. If the limits are exceeded, the current is automatically switched off. The extremely robust unit, protected all around with a tubular frame, is equipped with a three-point suspension for quick attachment to the power lift of tractors. Equipment: Connections 230V: 2x Schuko 16A Connections 400V: 1x CEE 16A-5p, 1x CEE 32A-5p, 1x CEE 63A-5p Emergency stop shutdown Shutdown in case of overload Short circuit THM-SS disconnection Insulation monitor Voltage monitoring Voltmeter Hertzmeter Hour meter Three-point hitch Power take-off protection Technical data: Voltage - frequency: 400 / 230/50 V/Hz Maximum power 3~400V: 44,50 kVA Continuous power 3~400V: 40,50 kVA Maximum power 1~230V: 14,80 kVA Continuous power 1~230V: 12,60 kVA Min. Tractor power: 95 hp PTO Speed: 430 rpm Generator speed: 1500 rpm Voltage control: AVR Dimensions (LxWxH): 1135 x 915 x 1400 mm Weight (without fuel): 280 kg Protection class: IP 44 Scope of delivery: 1x Elmag Power take-off Generator SEZN 38WD

Elmag PTO Generator SEZN 20WD-AVR-IT/TN Elmag PTO Generator for tractors - the reliable and low-maintenance solution for agriculture and forestry. The power take-off generator produces quality electricity with the PTO drive of a tractor. It is an ideal supply solution for agriculture, forestry, horticulture, construction and municipal enterprises for external operation of electric machines, water and lifting pumps, motors of construction machines, conveyor belts, hay blowers etc. The power take-off generator also serves as an emergency generator for house and farm, cold storage rooms, milk cooling, milking, butter, feeding and heating systems and much more. The power take-off generator is equipped with AVR Control, for the supply of difficult to start motors and electronic consumers (e.g. milking robots, etc.). By means of an operating mode selector switch, it offers simple and safe switchover from field operation (with direct connection of the consumers) to domestic operation (with feeding into the house network). All sockets are available for both operating modes, which increases the flexibility in use. In field operation, the 2-stage insulation monitoring is activated, in house operation it is deactivated. You have full control from the tractor thanks to extensive display and safety functions (traffic light display for frequency as well as voltage) as well as a voltage / power display for all 3 phases via multifunction display module. For maximum protection of sensitive consumers against over- and undervoltage, the power take-off generator offers an adjustable frequency and voltage monitoring. Thanks to protection class IP44 and a standard installed insulation monitoring the PTO unit can also be used in damp environments or in the rain. The use of a grounding spike is not required. Equipment: Operating mode selector switch for domestic and field operation Display and safety functions (traffic light display for frequency as well as voltage) Multifunctional display module for voltage as well as power display for all 3 phases AVR Control Three-point suspension Adjustable frequency and voltage monitoring Isolation monitoring 2-stage for field operation Sockets (field operation): 2x Schuko 230 V, 1x CEE 16 A 400 V, 1x CEE 32 A 400 V 1h socket (domestic operation): 1x CEE 63 A 400 V Indicators for basic setting for setting the correct PTO speed: Analog voltage display LED display voltage OK/not OK Analog frequency display LED traffic light display frequency HIGH/OK/LOW Control panel and socket panel: Multifunction display (V, A, Hz) Changeover switch house/field operation ISO monitor two-stage with fault indication Voltage and frequency monitoring 1h-socket for house as well as field operation Technical data: Voltage/frequency: 400/50 V/Hz Maximum power 3~400V: 21,80 kVa Continuous power 3~400V: 19,80 kVa Min. tractor power: 50 HP PTO speed: 430 rpm Generator speed: 1500 rpm Protection class: IP 44 Weight: 205 kg Scope of delivery: 1x Elmag PTO Generator SEZN 20WD-AVR-IT/TN

Elmag PTO Generator SEZN 30WD-AVR-IT/TN Elmag PTO Generator for tractors - the reliable and low-maintenance solution for agriculture and forestry. The power take-off generator produces quality electricity with the PTO drive of a tractor. It is an ideal supply solution for agriculture, forestry, horticulture, construction and municipal enterprises for external operation of electric machines, water and lifting pumps, motors of construction machines, conveyor belts, hay blowers etc. The power take-off generator also serves as an emergency generator for house and farm, cold storage rooms, milk cooling, milking, butter, feeding and heating systems and much more. The power take-off generator is equipped with AVR Control, for the supply of difficult to start motors and electronic consumers (e.g. milking robots, etc.). By means of an operating mode selector switch, it offers simple and safe switchover from field operation (with direct connection of the consumers) to domestic operation (with feeding into the house network). All sockets are available for both operating modes, which increases the flexibility in use. In field operation, the 2-stage insulation monitoring is activated, in house operation it is deactivated. You have full control from the tractor thanks to extensive display and safety functions (traffic light display for frequency as well as voltage) as well as a voltage / power display for all 3 phases via multifunction display module. For maximum protection of sensitive consumers against over- and undervoltage, the power take-off generator offers an adjustable frequency and voltage monitoring. Thanks to protection class IP44 and a standard installed insulation monitoring the PTO unit can also be used in damp environments or in the rain. The use of a grounding spike is not required. Equipment: Operating mode selector switch for domestic and field operation Display and safety functions (traffic light display for frequency as well as voltage) Multifunctional display module for voltage as well as power display for all 3 phases AVR Control Three-point suspension Adjustable frequency and voltage monitoring Isolation monitoring 2-stage for field operation Sockets (field operation): 2x Schuko 230 V, 1x CEE 16 A 400 V, 1x CEE 32 A 400 V 1h socket (domestic operation): 1x CEE 63 A 400 V Indicators for basic setting for setting the correct PTO speed: Analog voltage display LED display voltage OK/not OK Analog frequency display LED traffic light display frequency HIGH/OK/LOW Control panel and socket panel: Multifunction display (V, A, Hz) Changeover switch house/field operation ISO monitor two-stage with fault indication Voltage and frequency monitoring 1h-socket for house as well as field operation Technical data: Voltage/frequency: 400/50 V/Hz Maximum power 3~400V: 29,70 kVa Continuous power 3~400V: 27 kVa Min. tractor power: 70 HP PTO speed: 430 rpm Generator speed: 1500 rpm Protection class: IP 44 Weight: 245 kg Scope of delivery: 1x Elmag PTO Generator SEZN 30WD-AVR-IT/TN

Elmag PTO Generator SEZN 35WD-AVR-IT/TN Elmag PTO Generator for tractors - the reliable and low-maintenance solution for agriculture and forestry. The power take-off generator produces quality electricity with the PTO drive of a tractor. It is an ideal supply solution for agriculture, forestry, horticulture, construction and municipal enterprises for external operation of electric machines, water and lifting pumps, motors of construction machines, conveyor belts, hay blowers etc. The power take-off generator also serves as an emergency generator for house and farm, cold storage rooms, milk cooling, milking, butter, feeding and heating systems and much more. The power take-off generator is equipped with AVR Control, for the supply of difficult to start motors and electronic consumers (e.g. milking robots, etc.). By means of an operating mode selector switch, it offers simple and safe switchover from field operation (with direct connection of the consumers) to domestic operation (with feeding into the house network). All sockets are available for both operating modes, which increases the flexibility in use. In field operation, the 2-stage insulation monitoring is activated, in house operation it is deactivated. You have full control from the tractor thanks to extensive display and safety functions (traffic light display for frequency as well as voltage) as well as a voltage / power display for all 3 phases via multifunction display module. For maximum protection of sensitive consumers against over- and undervoltage, the power take-off generator offers an adjustable frequency and voltage monitoring. Thanks to protection class IP44 and a standard installed insulation monitoring the PTO unit can also be used in damp environments or in the rain. The use of a grounding spike is not required. Equipment: Operating mode selector switch for domestic and field operation Display and safety functions (traffic light display for frequency as well as voltage) Multifunctional display module for voltage as well as power display for all 3 phases AVR Control Three-point suspension Adjustable frequency and voltage monitoring Isolation monitoring 2-stage for field operation Sockets (field operation): 2x Schuko 230 V, 1x CEE 16 A 400 V, 1x CEE 32 A 400 V 1h socket (domestic operation): 1x CEE 63 A 400 V Indicators for basic setting for setting the correct PTO speed: Analog voltage display LED display voltage OK/not OK Analog frequency display LED traffic light display frequency HIGH/OK/LOW Control panel and socket panel: Multifunction display (V, A, Hz) Changeover switch house/field operation ISO monitor two-stage with fault indication Voltage and frequency monitoring 1h-socket for house as well as field operation Technical data: Voltage/frequency: 400/50 V/Hz Maximum power 3~400V: 35,60 kVa Continuous power 3~400V: 32,40 kVa Min. tractor power: 85 HP PTO speed: 430 rpm Generator speed: 1500 rpm Protection class: IP 44 Weight: 263 kg Scope of delivery: 1x Elmag PTO Generator SEZN 35WD-AVR-IT/TN

Elmag PTO Generator SEZN 45WD-AVR-IT/TN Elmag PTO Generator for tractors - the reliable and low-maintenance solution for agriculture and forestry. The power take-off generator produces quality electricity with the PTO drive of a tractor. It is an ideal supply solution for agriculture, forestry, horticulture, construction and municipal enterprises for external operation of electric machines, water and lifting pumps, motors of construction machines, conveyor belts, hay blowers etc. The power take-off generator also serves as an emergency generator for house and farm, cold storage rooms, milk cooling, milking, butter, feeding and heating systems and much more. The power take-off generator is equipped with AVR Control, for the supply of difficult to start motors and electronic consumers (e.g. milking robots, etc.). By means of an operating mode selector switch, it offers simple and safe switchover from field operation (with direct connection of the consumers) to domestic operation (with feeding into the house network). All sockets are available for both operating modes, which increases the flexibility in use. In field operation, the 2-stage insulation monitoring is activated, in house operation it is deactivated. You have full control from the tractor thanks to extensive display and safety functions (traffic light display for frequency as well as voltage) as well as a voltage / power display for all 3 phases via multifunction display module. For maximum protection of sensitive consumers against over- and undervoltage, the power take-off generator offers an adjustable frequency and voltage monitoring. Thanks to protection class IP44 and a standard installed insulation monitoring the PTO unit can also be used in damp environments or in the rain. The use of a grounding spike is not required. Equipment: Operating mode selector switch for domestic and field operation Display and safety functions (traffic light display for frequency as well as voltage) Multifunctional display module for voltage as well as power display for all 3 phases AVR Control Three-point suspension Adjustable frequency and voltage monitoring Isolation monitoring 2-stage for field operation Sockets (field operation): 2x Schuko 230 V, 1x CEE 16 A 400 V, 1x CEE 32 A 400 V 1h socket (domestic operation): 1x CEE 63 A 400 V Indicators for basic setting for setting the correct PTO speed: Analog voltage display LED display voltage OK/not OK Analog frequency display LED traffic light display frequency HIGH/OK/LOW Control panel and socket panel: Multifunction display (V, A, Hz) Changeover switch house/field operation ISO monitor two-stage with fault indication Voltage and frequency monitoring 1h-socket for house as well as field operation Technical data: Voltage/frequency: 400/50 V/Hz Maximum power 3~400V: 44,50 kVa Continuous power 3~400V: 40,50 kVa Min. tractor power: 100 HP PTO speed: 430 rpm Generator speed: 1500 rpm Protection class: IP 44 Weight: 280 kg Scope of delivery: 1x Elmag PTO Generator SEZN 45WD-AVR-IT/TN

Elmag PTO Generator SEZN 50WD-AVR-IT/TN Elmag PTO Generator for tractors - the reliable and low-maintenance solution for agriculture and forestry. The power take-off generator produces quality electricity with the PTO drive of a tractor. It is an ideal supply solution for agriculture, forestry, horticulture, construction and municipal enterprises for external operation of electric machines, water and lifting pumps, motors of construction machines, conveyor belts, hay blowers etc. The power take-off generator also serves as an emergency generator for house and farm, cold storage rooms, milk cooling, milking, butter, feeding and heating systems and much more. The power take-off generator is equipped with AVR Control, for the supply of difficult to start motors and electronic consumers (e.g. milking robots, etc.). By means of an operating mode selector switch, it offers simple and safe switchover from field operation (with direct connection of the consumers) to domestic operation (with feeding into the house network). All sockets are available for both operating modes, which increases the flexibility in use. In field operation, the 2-stage insulation monitoring is activated, in house operation it is deactivated. You have full control from the tractor thanks to extensive display and safety functions (traffic light display for frequency as well as voltage) as well as a voltage / power display for all 3 phases via multifunction display module. For maximum protection of sensitive consumers against over- and undervoltage, the power take-off generator offers an adjustable frequency and voltage monitoring. Thanks to protection class IP44 and a standard installed insulation monitoring the PTO unit can also be used in damp environments or in the rain. The use of a grounding spike is not required. Equipment: Operating mode selector switch for domestic and field operation Display and safety functions (traffic light display for frequency as well as voltage) Multifunctional display module for voltage as well as power display for all 3 phases AVR Control Three-point suspension Adjustable frequency and voltage monitoring Isolation monitoring 2-stage for field operation Sockets (field operation): 2x Schuko 230 V, 1x CEE 16 A 400 V, 1x CEE 32 A 400 V 1h socket (domestic operation): 1x CEE 63 A 400 V Indicators for basic setting for setting the correct PTO speed: Analog voltage display LED display voltage OK/not OK Analog frequency display LED traffic light display frequency HIGH/OK/LOW Control panel and socket panel: Multifunction display (V, A, Hz) Changeover switch house/field operation ISO monitor two-stage with fault indication Voltage and frequency monitoring 1h-socket for house as well as field operation Technical data: Voltage/frequency: 400/50 V/Hz Maximum power 3~400V: 49,50 kVa Continuous power 3~400V: 45 kVa Min. tractor power: 115 HP PTO speed: 430 rpm Generator speed: 1500 rpm Protection class: IP 44 Weight: 315 kg Scope of delivery: 1x Elmag PTO Generator SEZN 50WD-AVR-IT/TN

Elmag Power Generator SEB 7500WD-AVR Gasoline power generator seb 230 and 400 Volt - Universal three-phase emergency generator for three-phase and alternating current. Extreme use? Inductive power consumers? That's no problem for the powerful SEB power generators from ELMAG, because that is exactly what they are designed for. They turn choppers, compressors, circular saws, cooling units, mixers, pumps and can also be used for motors that start up with difficulty. They power alpine huts, construction sites, and are often used in commercial, agricultural, and municipal operations. For Emergency power they are the most widely used devices. The emergency generators have an Alternating current and five-pole three-phase connection (cee). However, additional connections can also be provided as an option. Thus, they cover a wide power spectrum for a large number of consumers. The SEB 7500-WD-AVR power generator is a frequently requested 400/230 Volt gasoline generator for commercial use in construction, for service applications and agriculture as well as for private emergency power supply. With integrated AVR control the emergency generator is also suitable for sensitive consumers such as computers, cell phones or televisions. Thanks to the oversized generator, a high unbalanced load is guaranteed. The integrated automatic shutdown provides protection in the event of overload, oil starvation and low oil pressure. Equipment: Connections: 1x 230 V Schuko 16 a, 1x 400 V CEE 16A-5p Synchronous generator with Honda EasyStart manual starting system Original Honda four-stroke gasoline engine GX390, air-cooled AVR control for sensitive consumers Thermal circuit breaker with shutdown in case of overload Automatic shutdown in the event of low oil or low oil pressure Technical data: Voltage - frequency: 400 / 230/50 V/Hz Maximum power 3~400V: 8 kVA Continuous power 3~400V: 7,20 kVA Power 3~400V cont.: 10 A Maximum power 1~230V: 3,80 kVA Continuous power 1~230V: 3,40 kVA Power 1~230V cont.: 14,40 A Fuel type: gasoline Speed: 3000 rpm Cooling: air cooled Engine type: Honda GX 390 Exhaust gas stage: 5 Engine power: 8,2 kW Displacement: 389 cm³ Cylinders: 1 Tank capacity: 6,10 l Consumption at 75% load: 2,80 l/h Running time per tank filling at 75% load: 2,20 h Dimensions (LxWxH): 830 x 510 x 560 mm Weight (without fuel): 91 kg Sound power according to rl 2000/14/eg, 2005/88/eg: 97 LWA Sound pressure level at 7m: 72 dB(A) Protection class: IP 23 Scope of delivery: 1x Elmag Power generator SEB 7500WD-AVR

Elmag 5 Finger MIG/MAG/MMA Welding Gloves Soft, flexibel and durable: The welding gloves from elmag guarantee optimum handling during welding. The Elmag 5-Finger Welding Gloves with reinforced thumb allow optimum control over welding electrodes with small diameters and TIG rods or torches. Due to the very soft and flexible cow split leather material you get a very good fingertip feeling for MIG/MAG/MMA welding. The special texture of the leather is excellent for protection during welding. A long durability of the gloves is guaranteed by a 3-fold stitched KEVLAR® yarn and continuous double stitching. Overview: Ideal for MIG/MAG/MMA welders Guarantees dexterity during welding Soft 1A Quality cowhide split leather High quality COMFOflex® lining 3-fold KEVLAR® thread sewn Continuous double seams for long life Reinforced thumb, wide model Electrostatic tested Length: 35 cm / Size: 9,5 Scope of delivery: 1 Pair of Elmag 5-Finger MIG/MAG/MMA Welding gloves

Elmag Power Generator SED 10000WDE-AVR The robust diesel power generator SED 230 and 400 Volt offers a reliable power supply for your agriculture. The SED 10000WDE-AVR is a modern, partially enclosed high performance model for stationary emergency power supply. The robust power generator from elmag is a faithful companion for powering power tools and provides sufficient power for lighting, a water pump, a heater or serves as an emergency supply for your stable in the event of an emergency. With integrated AVR control the emergency generator is also for sensitive consumers such as computers, cell phones or televisions. The power generator with electric start is equipped with a Schuko socket and a cee connection 400 V provided. The Magneto-Stop guarantees electrical motor shutdown in case of overload and short circuit, as well as automatic shutdown in case of low oil pressure. Equipment: Connections: 1x 230 Volt schuko 16A, 1x 400 Volt CEE 32A-5p Original LOMBARDINI four-stroke diesel engine 25ld 425, air-cooled Electric start system with maintenance free start battery Battery start Emergency stop shutdown Overload shutdown Short circuit ThM-SS shutdown Synchronous generator AVR control Voltmeter Hertzmeter Hour meter Fuel alarm Oil pressure lamp Magnetostop Technical data: Voltage - frequency: 400 / 230/50 V/Hz Maximum power 3~400V: 10 kVA Continuous power 3~400V: 9,10 kVA Power 3~400V cont.: 11 A Maximum power 1~230V: 3,80 kVA Continuous power 1~230V: 3,40 kVA Power 1~230V cont.: 14,40 A Fuel type: Diesel Speed: 3000 rpm Cooling: air cooled Engine type: Kohler/Lombardini 25ld 425 Engine power: 13 kW Displacement: 851 cm³ Cylinders: 2 Tank capacity: 20 l consumption at 75% load: 3 l/h Running time per tank filling at 75% load: 6,70 h Dimensions (LxWxH): 1000 x 560 x 670 mm Weight (without fuel): 181 kg Sound pressure level at 7m: 85 dB(A) Protection class: IP 23 Scope of delivery: 1x Elmag Power Generator SED 10000WDE-AVR

Elmag Automatic Welding Shield PREMIUM-TC The new MultiSafeVario® welding shield offers welding protection at the highest level. With TRUE COLOR visor for excellent color perception during welding. The new MultiSafeVario® welding helmet "PREMIUM-TC" can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG shielded ARC welding, plasma cutting, microplasma welding, gas welding and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. Due to the adjustable headband with snap-in mechanism the shield can be comfortably adjusted to the head size. It offers thanks to UpandDown mechanism a center of gravity optimization when opening and closing the visor. A weight of only 460 grams ensures optimum wearing comfort during welding. The brightness level of the extra large field of view (100 x 65 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated. When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam. The welding shield has 2 adjustable protection level ranges (degree of darkening for optimum visibility, depending on the welding process or arc strength). These are adjustable together with the response (sensitivity) of the field of vision at any time continuously adjustable at any time by means of controls on the inside of the helmet - one hand remains free for the welding torch. Areas of application: Already from 3 amps MMA/E-HAND/SMAW MIG/MAG/GMAW FILLER WIRE TIG/TIG/GTAW PLASMA CUTTING MICRO PLASMA WELDING GAS WELDING GRINDING Overview: TRUE COLOR glare protection cassette for true color perception during welding Extra large field of view (WxH) 100 x 65 mm Best rating for classification 1/1/1/1 Low switching time of only 0,033 ms Two continuously adjustable protection level ranges, internally adjustable from 4-8 or 9-13 Internal, adjustable delay/brightening delay Internal adjustable sensitivity for optimal response, even in the low amp range Replaceable back-up battery (1 PC. CR 2450) Test button to check function Suitable for overhead and forced position welding Optionally available dioptric disc inserts Low weight of only 460 g for optimal wearing comfort Welding and grinding mode Aperture with up-and-down mechanism Quick 9-step angle adjustment of the helmet Soft, replaceable sweatbands at the front, top and back Continuous adjustment of the headband width Distance between helmet and face adjustable in 3 steps Both hands free for set-up and welding work High welding quality due to continuous observation Certified according to EN 379/175/166 and PPE (EU) 2016/425 Technical data: Automatic fast forward and reverse: NO Anti-glare filter: TRUE COLOR Field of view size (WxH): 100 x 65 mm Classification according to en 379: 1/1/1 Light sensors: 4 Solar technology: Yes Fully automatic: No Mode switch welding/grinding: No Power supply: Solar cells Back-up battery: Yes Test switch: No Grinding mode: Yes Fill-in delay short/medium/long: No Battery level indicator: Yes Protection level adjustment DIN EN 4/9-13: Stepless Protection level setting sensitivity: Stepless Protection level darkened max.: DIN 8 or 13 Switch-on time at 22 °C: 0,000033 s Brightening time short/medium/long: 0,3 ~ 0,9 s Protection level bright: DIN 4 Protection level darkened min: DIN 4 or 9 Ultraviolet protection UV permanent: DIN 16 Infrared protection IR permanent: DIN 16 Helmet material polyamide/nylon: No Operating temperature: -5 to +55 °C Storage temperature: -20 to +70 °C Cassette size (WxHxS): 156 x 158 x 9 mm Weight: 0,46 kg Scope of delivery: 1x Elmag Automatic Welding Shield PREMIUM-TC 3x Faceplate outside 1x Faceplate inside 1x Color cardboard packaging

Elmag Electric Heater EUROHEAT WE 3000 Heat up enclosed spaces quickly and reliably with the heat-giving fan heater from ELMAG. The Heater EUROHEAT WE 3000 provides comfortable warmth on cold days. With 3 kW power the compact fan heater is ideal for heating up enclosed spaces such as apartments, pubs, workshops, etc. By means of an integrated thermostat regulator, the generated warm air flow can be can be infinitely adjusted to the desired temperature and by means of two power levels dosed as required. High-quality stainless steel tubular elements guarantee a long service life and reliable operation of the fan heater. In addition, the heater has an integrated overheating protection. Overview: For enclosed spaces such as apartments, workshops, pubs, etc. 2 Power levels Simple temperature control infinitely variable Overheating protection High quality, durable stainless steel tubular elements Warm heating air without exhaust fumes Technical data: Power: 3 kW / 3000 Watt Air output: 280 m³/h Mains voltage: 230 V Dimensions (LxWxH): 270 x 255 x 405 mm Weight: 5 kg Scope of delivery: 1x Elmag Electric Heater EUROHEAT WE 3000

Elmag Automatic Welding Shield EAGLE The stylish MultiSafeVario® welding helmet offers welding protection at the highest level. The best-selling model from ELMAG has already proven itself thousands of times! The MultiSafeVario® Welding helmet "EAGLE" can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG inert gas welding, plasma cutting and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. Due to the adjustable headband with snap-in mechanism the shield can be comfortably adjusted to the head size. It offers thanks to UpandDown mechanism a center of gravity optimization when opening and closing the visor. The brightness level of the large field of view (98 x 55 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated. When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam. The protection level (degree of darkening for optimum vision, depending on the welding process or arc intensity) and the response (sensitivity) of the field of vision can be continuously adjustable at any time by means of controls on the outside of the helmet - one hand remains free for the welding torch. Field of application: Already from 5 amps MMA/E-HAND/SMAW MIG/MAG/GMAW FILLER WIRE TIG/TIG/GTAW PLASMA CUTTING GRINDING Overview: Best-selling model from elmag, proven a thousand times over GREEN COLOR glare protection cassette Large field of view (WxH) 98 x 55 mm Stylish helmet design Low switching time of only 0,05 ms External, adjustable delay/brightening delay External, adjustable sensitivity for optimal response Replaceable back-up batteries (2 PCS. CR 2450) Test button to check function Suitable for overhead and forced position welding Welding and grinding mode Optionally available dioptric disc inserts Aperture with up-and-down mechanism Comfortable, adjustable headband with snap-in mechanism Headband and brow welding band interchangeable Visor angle and wearing height adjustable Both hands free for set-up and welding work High welding quality due to continuous observation Certified according to EN 379/175/166 and PPE (EU) 2016/425 Technical data: Automatic fast forward and reverse: No Anti-glare filter: GREEN COLOR Field of view size (WxH): 98 x 55 mm Classification according to EN 379: 1/1/1/2 Light sensors: 4 Fully automatic: Yes Solar technology: Yes Mode switch welding/grinding: Yes Power supply: Solar cells Back-up battery: Yes Test switch: Yes Grinding mode: No Fill-in delay short/medium/long: Yes Battery level indicator: No Protection level setting DIN EN 4/9-13: Stepless Protection level setting sensitivity: Stepless Switch-on time at 22 °C: 0,00005 s Protection level darkened max.: DIN 13 Brightening time short/medium/long: 0,3 ~ 0,9 s Protection level bright: DIN 4 Protection level darkened min.: DIN 9 Ultraviolet protection UV permanent: DIN 16 Infrared protection IR permanent: DIN 16 Helmet material polyamide/nylon: Yes Operating temperature: -5 to +55 °C Storage temperature: -20 to +70 °C Cassette size (WxHxS): 115 x 125 x 18 mm Weight: 0,47 kg Scope of delivery: 1x Elmag Automatic Welding Shield EAGLE 3x Faceplate outside 1x Faceplate inside 1x Color cardboard packaging

Elmag Automatic Welding Shield FLAME The stylish MultiSafeVario® welding helmet offers welding protection at the highest level. The best-selling model from ELMAG has already proven itself thousands of times! The MultiSafeVario® Welding helmet "FLAME" can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG inert gas welding, plasma cutting and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. Due to the adjustable headband with snap-in mechanism the shield can be comfortably adjusted to the head size. It offers thanks to UpandDown mechanism a center of gravity optimization when opening and closing the visor. The brightness level of the large field of view (98 x 55 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated. When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam. The protection level (degree of darkening for optimum vision, depending on the welding process or arc intensity) and the response (sensitivity) of the field of vision can be continuously adjustable at any time by means of controls on the outside of the helmet - one hand remains free for the welding torch. Field of application: Already from 5 amps MMA/E-HAND/SMAW MIG/MAG/GMAW FILLER WIRE TIG/TIG/GTAW PLASMA CUTTING GRINDING Overview: Best-selling model from elmag, proven a thousand times over GREEN COLOR glare protection cassette Large field of view (WxH) 98 x 55 mm Stylish helmet design Low switching time of only 0,05 ms External, adjustable delay/brightening delay External, adjustable sensitivity for optimal response Replaceable back-up batteries (2 PCS. CR 2450) Test button to check function Suitable for overhead and forced position welding Welding and grinding mode Optionally available dioptric disc inserts Aperture with up-and-down mechanism Comfortable, adjustable headband with snap-in mechanism Headband and brow welding band interchangeable Visor angle and wearing height adjustable Both hands free for set-up and welding work High welding quality due to continuous observation Certified according to EN 379/175/166 and PPE (EU) 2016/425 Technical data: Automatic fast forward and reverse: No Anti-glare filter: GREEN COLOR Field of view size (WxH): 98 x 55 mm Classification according to EN 379: 1/1/1/2 Light sensors: 4 Fully automatic: Yes Solar technology: Yes Mode switch welding/grinding: Yes Power supply: Solar cells Back-up battery: Yes Test switch: Yes Grinding mode: No Fill-in delay short/medium/long: Yes Battery level indicator: No Protection level setting DIN EN 4/9-13: Stepless Protection level setting sensitivity: Stepless Switch-on time at 22 °C: 0,00005 s Protection level darkened max.: DIN 13 Brightening time short/medium/long: 0,3 ~ 0,9 s Protection level bright: DIN 4 Protection level darkened min.: DIN 9 Ultraviolet protection UV permanent: DIN 16 Infrared protection IR permanent: DIN 16 Helmet material polyamide/nylon: Yes Operating temperature: -5 to +55 °C Storage temperature: -20 to +70 °C Cassette size (WxHxS): 115 x 125 x 18 mm Weight: 0,47 kg Scope of delivery: 1x Elmag Automatic Welding Shield FLAME 3x Faceplate outside 1x Faceplate inside 1x Color cardboard packaging

Elmag Electric Heater EUROHEAT DE 5000 Heat up enclosed spaces quickly and reliably with the heat-giving 5 kW fan heater from ELMAG. The Heater EUROHEAT DE 5000 provides comfortable warmth on cold days. With 5 kW power the compact fan heater is ideal for heating up enclosed spaces such as apartments, pubs, workshops, etc. By means of an integrated thermostat regulator, the generated warm air flow can be can be infinitely adjusted to the desired temperature and by means of two power levels dosed as required. High-quality stainless steel tubular elements guarantee a long service life and reliable operation of the fan heater. In addition, the heater has an integrated overheating protection. Overview: For enclosed spaces such as apartments, workshops, pubs, etc. 2 Power levels Simple temperature control infinitely variable Overheating protection High quality, durable stainless steel tubular elements Warm heating air without exhaust fumes Technical data: Power: 5 kW / 5000 Watt Air output: 320 m³/h Mains voltage: 400 V Dimensions (LxWxH): 270 x 255 x 405 mm Weight: 5,80 kg Scope of delivery: 1x Elmag Electric Heater EUROHEAT DE 5000

Elmag Electric fence opener Automatic Reel 20 m Open and close the pasture for your horses, cattle easily in seconds - No problem with the automatic pasture fence opener! The Opener for the pasture fence is ideal for fencing and demarcating pasture areas. The ladder material can be pulled in and out with the insulated handle up to 20 meters controlled pull in and roll out. The impact resistant plastic housing is designed for a long service life. Easy to mount bracket suspends the pasture fence tape reel from the post or wall. Overview: Practical opener for the pasture fence Controlled pulling in and out Pasture fence tape 20 meters, current-carrying Insulated handle with contact hook Impact resistant plastic housing Metal swivel bracket High flexibility Scope of delivery: 1x Elmag Electric fence opener Automatic Reel 20 m

Elmag Automatic Welding Shield The MultiSafeVario® welding helmet offers welding protection at the highest level. With TRUE COLOR visor for perfect true color perception during welding. The MultiSafeVario® Welding helmet can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG inert gas welding, plasma cutting and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. The new TRUE COLOR glare shield enables a true color perception during welding. Due to the adjustable headband with locking mechanism the shield can be adjusted to the head size. Thanks to the UpandDown mechanism a center of gravity optimization when opening and closing the visor. The brightness level of the field of vision (98 x 43 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated. When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam. The protection level (degree of darkening for optimum vision, depending on the welding process or arc intensity) and the response (sensitivity) of the field of vision can be continuously adjustable at any time by means of controls on the outside of the helmet - one hand remains free for the welding torch. Areas of application: Already from 5 amps MMA/E-HAND/SMAW MIG/MAG/GMAW FILLING WIRE TIG/TIG/GTAW PLASMAS CUTTING GRINDING Overview: TRUE COLOR anti-glare cassette for true color perception during welding Field of view size (WxH) 98 x 43 mm Best rating in EN 379 Classification 1/1/1 Low switching time of only 0,05 ms Inside, adjustable delay/brightness External, adjustable sensitivity/sensitivity for optimal response Replaceable back-up batteries (2 PCS. CR2450) Suitable for overhead and forced position welding Welding and grinding mode Optionally available diopter disc inserts Aperture with up-and-down mechanism Comfortable, adjustable headband with snap-in mechanism Headband and brow welding band interchangeable Visor angle and wearing height adjustable Both hands free for set-up and welding work High welding quality due to continuous observation Technical data: Automatic fast forward and reverse: No Anti-glare filter: TRUE COLOR Field of view size (WxH): 98 x 43 mm Classification according to EN 379: 1/1/1 Light sensors: 4 Fully automatic: No Solar technology: Yes Power supply: Solar cells Mode switch welding/grinding: No Back-up battery: Yes Test switch: No Grinding mode: Yes Brightening delay short/medium/long: No Battery level indicator: No Protection level adjustment DIN EN 4/9-13: Stepless Protection level setting sensitivity: Stepless Protection level darkened max.: DIN 13 Switch-on time at 22 °C: 0,00005 s Brightening time short/medium/long: 0,3 ~ 0,9 s Protection level bright: DIN 4 Protection level darkened min.: DIN 9 Ultraviolet protection UV permanent: DIN 16 Infrared protection IR permanent: DIN 16 Helmet material polyamide/nylon: No Operating temperature: -5 to +55 °C Storage temperature: -20 to +70 °C Cassette size (WxHxS): 128 x 117 x 18 mm Weight: 0,52 kg Scope of delivery: 1x Elmag Automatic Welding Shield 3x Faceplate outside 1x Faceplate inside 1x Color cardboard packaging

Elmag Automatic Welding Shield ART The stylish MultiSafeVario® welding helmet offers welding protection at the highest level. The best-selling model from ELMAG has already proven itself thousands of times! The MultiSafeVario® Welding helmet "ART" can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG inert gas welding, plasma cutting and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. Due to the adjustable headband with snap-in mechanism the shield can be comfortably adjusted to the head size. It offers thanks to UpandDown mechanism a center of gravity optimization when opening and closing the visor. The brightness level of the large field of view (98 x 55 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated. When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam. The protection level (degree of darkening for optimum vision, depending on the welding process or arc intensity) and the response (sensitivity) of the field of vision can be continuously adjustable at any time by means of controls on the outside of the helmet - one hand remains free for the welding torch. Field of application: Already from 5 amps MMA/E-HAND/SMAW MIG/MAG/GMAW FILLER WIRE TIG/TIG/GTAW PLASMA CUTTING GRINDING Overview: Best-selling model from elmag, proven a thousand times over GREEN COLOR glare protection cassette Large field of view (WxH) 98 x 55 mm Stylish helmet design Low switching time of only 0,05 ms External, adjustable delay/brightening delay External, adjustable sensitivity for optimal response Replaceable back-up batteries (2 PCS. CR 2450) Test button to check function Suitable for overhead and forced position welding Welding and grinding mode Optionally available dioptric disc inserts Aperture with up-and-down mechanism Comfortable, adjustable headband with snap-in mechanism Headband and brow welding band interchangeable Visor angle and wearing height adjustable Both hands free for set-up and welding work High welding quality due to continuous observation Certified according to EN 379/175/166 and PPE (EU) 2016/425 Technical data: Automatic fast forward and reverse: No Anti-glare filter: GREEN COLOR Field of view size (WxH): 98 x 55 mm Classification according to EN 379: 1/1/1/2 Light sensors: 4 Fully automatic: Yes Solar technology: Yes Mode switch welding/grinding: Yes Power supply: Solar cells Back-up battery: Yes Test switch: Yes Grinding mode: No Fill-in delay short/medium/long: Yes Battery level indicator: No Protection level setting DIN EN 4/9-13: Stepless Protection level setting sensitivity: Stepless Switch-on time at 22 °C: 0,00005 s Protection level darkened max.: DIN 13 Brightening time short/medium/long: 0,3 ~ 0,9 s Protection level bright: DIN 4 Protection level darkened min.: DIN 9 Ultraviolet protection UV permanent: DIN 16 Infrared protection IR permanent: DIN 16 Helmet material polyamide/nylon: Yes Operating temperature: -5 to +55 °C Storage temperature: -20 to +70 °C Cassette size (WxHxS): 115 x 125 x 18 mm Weight: 0,47 kg Scope of delivery: 1x Elmag Automatic Welding Shield ART 3x Faceplate outside 1x Faceplate inside 1x Color cardboard packaging

Elmag Electric Heater EUROHEAT DE 9000 Heat up enclosed spaces quickly and reliably with the heat-giving 9 kW fan heater from ELMAG. The Heater EUROHEAT DE 9000 provides a comfortable warmth on cold days. With 9 kW power the compact fan heater is ideal for heating up enclosed spaces such as apartments, pubs, workshops, etc. By means of an integrated thermostat regulator, the generated warm air flow can be can be infinitely adjusted to the desired temperature and by means of three power levels dosed as required. High-quality stainless steel tubular elements guarantee a long service life and reliable operation of the fan heater. In addition, the heater has an integrated overheating protection. Overview: For enclosed spaces such as apartments, workshops, pubs, etc. 3 Power levels Simple temperature control infinitely variable Overheating protection High quality, durable stainless steel tubular elements Warm heating air without exhaust fumes Technical data: Power: 9 kW / 9000 Watt Air output: 708 m³/h Mains voltage: 400 V Dimensions (LxWxH): 355 x 300 x 490 mm Weight: 9,50 kg Scope of delivery: 1x Elmag Electric Heater EUROHEAT DE 9000

Elmag Electric Heater EUROHEAT DE 15000 Heat up enclosed spaces quickly and reliably with the heat-giving 15 kW fan heater from ELMAG. The Heater EUROHEAT DE 15000 provides a comfortable warmth on cold days. With 15 kW power, the compact fan heater is ideal for heating up enclosed spaces such as apartments, pubs, workshops, etc. By means of an integrated thermostat regulator, the generated warm air flow can be can be infinitely adjusted to the desired temperature and by means of three power levels dosed as required. High-quality stainless steel tubular elements guarantee a long service life and reliable operation of the fan heater. In addition, the heater has an integrated overheating protection. Overview: For enclosed spaces such as apartments, workshops, pubs, etc. 3 Power levels Simple temperature control infinitely variable Overheating protection High quality, durable stainless steel tubular elements Warm heating air without exhaust fumes Technical data: Power: 15 kW / 15000 Watt Air output: 1.292 m³/h Mains voltage: 400 V Dimensions (LxWxH): 408 x 343 x 562 mm Weight: 14,30 kg Scope of delivery: 1x Elmag Electric Heater EUROHEAT DE 15000

Elmag Hand pallet truck HW 2500 Reliable, tried and tested - The hand pallet truck from ELMAG is the reliable standard device for continuous operation in pallet transport. With 1150 mm fork length and a load capacity of 2500 kg the Elmag Hand pallet truck HW 2500 is the professional standard device in production, industry and trade. For the transport of Euro pallets the pallet truck has proven itself above all through its robust and reliable design in daily continuous operation. The robust stop block and the rollers on the fork tips make it possible to easy driving onto pallets. With the ergonomically designed handle you can goods comfortably lift, drive and lower. The lowering speed can be controlled precisely and sensitively with the hand lever. Rubber wheels and polyurethane tandem casters ensure a massive noise reduction during transport. Overview: Safe transport of goods One-hand lever with 3 functions: Lifting - driving - lowering Easy driving onto pallets Rubber wheels and polyurethane tandem rollers Massive noise reduction during transport Dimensions: W = 1150 mm A1 = 540 mm A2 = 240 mm Technical data: Load capacity: 2500 kg Fork width: 540 mm Fork length: 1150 mm Minimum height: 80 mm Max. Lifting height: 200 mm Weight: 75 kg Scope of delivery: 1x Elmag Hand pallet truck HW 2500

Elmag Inverter Power Generator SEBSS 2000Wi Compact and mobile gasoline emergency generator with super-silenced inverter technology. Ideal for sensitive equipment such as cell phones, computers, televisions or lighting. Camping, boating and sailing trips, assembly, service & rescue operations, power supply for mobile homes, market stalls and mountain huts - the compact Inverter Power Generator SEBSS 2000Wi is an flexiall-rounder for independent power supply independent power supply. The power generator fits in any trunk, is a quickly available source of energy for lighting and 230 volt electrical appliances and provides direct current for charging and for the operation of 12 volt devices as well as a usb connection for mobile devices. With a sound-insulating plastic housing and a special silencer the emergency generator SEBSS 2000Wi offers a particularly low noise level low sound level even at full load. The standard ECO automatic system goes one step further. It continuously adjusts the engine speed to the power consumed and thus significantly reduces both noise and fuel consumption in part-load operation. The noise level is reduced significantly to 58 dB(a) at a distance of 7 meters. This corresponds to a moderate speaking volume. The inverter power generator from elmag delivers an extremely clean sine wave, which is suitable for all sensitive consumers. With simple devices with block wave, some devices can already get a problem - but not with the new inverter generator SEBSS 2000Wi. The emergency power generator has a load-dependent speed adjustment for the reduce fuel consumption and to reduce the noise level. For higher power requirements, two units can be coupled to the parallel operation sockets to add the power of both units. Equipment: 2 Earthed sockets 230 V Battery charging connection 12 V Efficient air cooling USB connection Original YAMAHA MZ80 4-stroke petrol engine, 1,6 kW Easy handling - reverse start with YAMAHA EasyStart LED status display Automatic shutdown in case of low oil Overload and short circuit protection ECO automatic Extra quiet - max. 68 dB(A) Super light - only 21,5 kg Parallel operation possible Technical data: Voltage - frequency: 230/50 V/Hz Maximum power 1~230V: 2 kVA Continuous power 1~230V: 1,60 kVA Power 1~230V cont.: 7 A Power 12VDC a cont.: 12V DC 8,3 / 5V USB 2 A Fuel type: Gasoline Stage: 5 Cooling: Air cooled Engine type: MZ80 Engine power: 1,6 kW Displacement: 79 cm³ Cylinders: 1 Tank capacity: 4 l Consumption at 75% load: 1 l/h Running time per tank filling at 75% load: 4 h Dimensions (LxWxH): 500 x 280 x 510 mm Weight (without fuel): 21,50 kg Sound power according to rl 2000/14/eg, 2005/88/eg: 93 LWA Sound pressure level at 7m: 68 dB(A) Protection class: IP 23 Scope of delivery: 1x Elmag Inverter Power Generator SEBSS 2000Wi

Elmag Power Generator SEB 16000WDE-AVR Gasoline power generator SEB 230 and 400 Volt - Universal three-phase emergency generator for three-phase and alternating current. Extreme use? Inductive power consumers? That's no problem for the powerful seb power generators from ELMAG, because that is exactly what they are designed for. They turn choppers, compressors, circular saws, cooling units, mixers, pumps and can also be used for motors that start up with difficulty. They power alm huts, construction sites and are often used in commercial, agricultural and municipal operations. For Emergency power they are the most widely used devices. The emergency generators have an Alternating current and five-pole three-phase connection (cee). However, additional connections can also be provided as an option. Thus, they cover a wide power spectrum for a large number of consumers. The SEB 16000WDE-AVR power generator is an excellent, frequently used high-performance unit with removable tank 20 l as well as fuel-saving ECO automatic idling system. The synchronous generator with electric start system and maintenance-free start battery is ideal for operation on construction sites but also as an emergency power supply for buildings with high power requirements (e.g. heat pumps). Thanks to AVR control the emergency generator is also ideally suited for sensitive consumers. The integrated automatic shutdown provides protection in the event of overload, short circuit, lack of oil or low oil pressure. Equipment: Connections: 1x 230 V Schuko 16 A and 1x 400 V CEE 16A-5p Synchronous generator with electric start system and maintenance free start battery Battery start Original HONDA four-stroke gasoline engine GX690, air-cooled AVR control for sensitive consumers standard Thermal-magnetic circuit breaker with shutdown in case of overload and short circuit Automatic shutdown in case of low oil or low oil pressure ECO-automatic Hour counter Removable tank Diaphragm pump Technical data: Voltage - frequency: 400 / 230/50 V/Hz Maximum power 3~400V: 16 kVA Continuous power 3~400V: 14,40 kVA Power 3~400V cont.: 21 A Maximum power 1~230V: 5,80 kVA Continuous power 1~230V: 5,30 kVA Power 1~230V cont.: 23 A Fuel type: gasoline Speed: 3000 rpm Cooling: air cooled Engine type: Honda GX 690 Exhaust stage: 5 Engine power: 15 kW Displacement: 688 cm³ Cylinders: 2 Tank capacity: 20 l Consumption at 75% load: 5 l/h Running time per tank filling at 75% load: 4 h Dimensions (LxWxH): 1020 x 550 x 600 mm Weight (without fuel): 154 kg Sound pressure level at 7m: 75 dB(a) Protection class: IP 23 Scope of delivery: 1x Elmag Power Generator SEB 16000WDE-AVR

Elmag Power Generator SEB 3300W-AVR Power generator petrol SEB 230 Volt - emergency generator for smart farmer and blackout. The SEB 3300W-AVR Power generator is the right choice when it comes to the short-term supply of any power consumers and power tools. This includes boilers, fan heaters, hotplates, drills, hand-held circular and chain saws, lawn mowers, water pumps, etc. The 230 Volt power unit offers a Power of 3 kVA. So even large single-phase loads are no problem. The gasoline-powered high-speed generator with synchronous generator is also ideal for the Basic supply in case of power failures and as a customer service device for the operation of lighting, small household appliances, tv, pc, etc. A stable tubular frame protects the emergency generator during service, customer service and installation operations, as well as when supplying power on construction sites, in municipal operations or in agriculture. Equipment: Connections: 2x 230 V Schuko 16 A Automatic switch-off in case of low oil Original Honda four-stroke gasoline engine GX200, air-cooled Synchronous generator with AVR Control Manual start with EasyStart System Thermal circuit breaker with shutdown in case of overload Technical data: Voltage - frequency: 230/50 V/Hz Maximum power 1~230V: 3 kVA Continuous power 1~230V: 2,70 kVA Power 1~230V cont.: 12 A Fuel type: Gasoline Speed: 3000 rpm Stage: 5 Cooling: air cooled Engine type: Honda GX 200 Engine power: 3,8 kW Displacement: 196 cm³ Cylinders: 1 Tank capacity: 3,10 l consumption at 75% load: 1,30 l/h Running time per tank filling at 75% load: 2,40 h Dimensions (LxWxH): 580 x 420 x 440 mm Weight (without fuel): 42 kg Sound power according to rl 2000/14/eg, 2005/88/eg: 95 LWA Sound pressure level at 7m: 70 dB(A) Protection class: IP 23 Scope of delivery: 1x Elmag Power Generator SEB 3300W-AVR