Mounting brackets for water bowls, in pairs in a nutshell:


  • pipe attachment for water bowls
  • diameter from 30 to 120 mm
  • suitable for Kerbl drinking bowls
  • H10, HP20, SH30, S30, K75

Pipe mounting bracket, in pairs - for Kerbl water bowls

With the mounting bracket, the potions can be attached directly to the pipe!

The drinking basin can be attached directly to the pipe with the mounting brackets. Due to the different screws included in the scope of supply, the drinking bowl can be attached to pipes with a diameter of 30 to 120 mm. The required nut and washers are included.

Overview:

  • mounting bracket, 2 pieces
  • cast iron, enamelled
  • suitable for Kerbl potions
  • diameter from 30 to 120 mm
  • easy screw mounting

Delivery:

  • 2x mounting bracket
  • 4x screws, 120 mm
  • 4x screws, 80 mm
  • 4x screws, 50 mm
  • 4x washers
  • 4x stop nuts
Manufacturer "Kerbl"

Kerbl - tradition meets innovation in agriculture

Kerbl not only stands for decades of expertise in the field of animal accessories, but also for a deep connection to agriculture. As a global company, Kerbl offers an extensive range, ranging from agricultural products to equestrian and pet supplies through to stable, yard and electric fence supplies. With over 50 years of success in animal breeding and animal husbandry, Kerbl is constantly committed to improving the everyday lives of farmers, breeders and animal lovers through innovative solutions. Experience the world of Kerbl - where tradition and progress go hand in hand.

Animal species: Cattle, Horse
Material: cast iron

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Heatable water bowl H10 with Tubw Valve 24V, 80W, enamelled
Heatable water bowl H10 with tube valve 24 V, 80 W self-watering system for horses and cattle The heatable horse drinkers / beef drinker made of sturdy cast iron remains frost-free, even at temperatures down to -20 ° C. The heatable water bowl made of high quality gray cast iron is available with a heating capacity of approx. 80W. Through the tube valve, the water flow rate can be regulated and is heated, so this is optimally kept free of frost. Even with up to -20 C °! The self-draining device is easy to install, the valve does not need to be removed for installation. The frost-proof horse drink / cattle drinker is suitable for tube and wall mounting and can be connected at top and bottom with G1 / 2" internal thread. The power supply is guaranteed by a transformer of at least 100 W (not included in the delivery!) and a power connection by an external terminal box and is suitable for circulation heating systems. Overview: heatable self-trough, 80 W gray cast iron, black enamelled weight 11.5 kg bowl Capacity 1.6 liters water flow rate can be regulated  heating valve sonnection at top and bottom possible G1 / 2" internal thread suitable for pipe and wall mounting suitable for circulation heating systems simple power connection through external terminal box frost-resistant to approx. -20 °C Delivery: 1x Heated drinking bowl H10 with pipe valve 24 V, 80 W Which transformer is to be chosen? If you want to operate a drinking bowl with 80 watts of power, a transformer with 100 watts is sufficient. If you also want to connect a heating cable with 24 volts, simply add the power consumption (= wattage) of the cable. In the case of transformer selection, plan for a buffer of 15% as reserve.

€182.99*
Pcs.
Water bowl K75 plastic 2.8 l 1/2" connection
Water bowl K75 Plastic - Self-drinking water bowl for horses and cattle The cattle and horse drinker with easy-to-operate brass pipe valve is suitable for pasture and stable. The cattle and horse drinker K75 made of high-quality plastic can be used both in the stable and on the pasture. The self-watering system with a easy-to-operate running brass pipe valve regulates the water flow (up to a maximum of 11 liters / minute). The drinking bowl has a water volume of approx. 2.8 liters and is easy to clean thanks to the drain plug. The horse and cattle drinkers can be mounted directly on the pipe or on the wall thanks to the 4-point attachment. The water connection of 1/2 "is possible from above and below. Overview: water bowl K75 made of high quality plastic easy-to-operate pipe valve made of brass controllable water flow (up to 11 liters / minute) connection top and bottom possible easy cleaning by drain plug pipe and wall mounting 2.8 liter bowl volume Dimensions: Outside dimensions- 16 x 26 cm Drinking Bowl - 2.8 liters 1/2 "water connection Delivery: 1x Kerbl water bowl K75 plastic 1/2-inch water connection Note: Mounting material is not included!

€52.99*
Pcs.
Heatable plastic water bowl HP20 with pipe valve
The water bowl HP20 with integrated heating cable and frost-protection thermostat is optimally kept frost-free in winter! Here you will find a heated cattle and horse water bowl made of high-quality plastic (PP) with integrated and easily replaceable heating cable. The integrated frost-protection thermostat switches on at +5 °C and switches off again at approx. +13 °C. The cover on the bottom of the basin and the closed construction in the area of ??the valve inlet have an insulating effect and prevent the heat emitted by the heating cable from escaping. The heated bowl is suitable for circulation heating systems and is equipped with a drain plug for easy and quick cleaning. The Kerbl self-heating self-trough has a ½-inch top and bottom connection and is suitable for pipe and wall mounting. The frost-proof water bowl is available with two voltages (230 V or 24 V) and optionally with a pipe heating system. The heatable animal cabinets are frost-proof up to about -25 ° C. Overview: water bowl made of high quality plastic (PP) with integrated heating cable heating cable easily exchangeable Iintegrated frost protection thermostat smooth pipe valve made of brass adjustable water flow (up to 11 liters / minute) ½-inch connection from above and below for wall and pipe mounting incl. drain plug suitable for circulation heating systems optional: auxiliary pipe heating (approx. 2 meters) Dimensions: weight: about 2 kg bowl volume: 2.8 liters Models: water bowl with auxiliary pipe heating, 73 watts, 24 volts water bowl with auxiliary pipe heating, 73 watts, 230 volts water bowl without pipe heating, 31 watts, 24 volts water bowl without pipe heating, 31 Watt, 230 volts Note: For the 24 V version a transformer is required (not included!) Delivery: 1x heatable plastic water bowl with pipe valve HP20 1x valve 1x user manual Optional: 1x auxiliary pipe heating (heating cable for approx. 2 meters of pipeline)

€128.99*
Water bowl K75 plastic 28 l 3/4" connection
Water Bowl K75 Plastic - with 3/4 "connection With the water bowl K75 you provide your horses and cattle optimally with water. The self-trough made of high quality plastic is equipped with an easy-to-operate pipe valve. In addition, the water bowl has a capacity of 2.8 liters. The water flow can be up to max. 11 liters / minute regulated. Thanks to the round shape and the drain plug, the water bolwl is easy to clean. The animal cabinets are just as suitable for use in the pasture as for use in the stable. Thanks to the 4-point fixing system, the water bowl can be mounted on both on the wall and on a pipe. The water connection is possible at the top and bottom with a 3/4 "connection. Overview: water bowl K75 made of high quality plastic easy-to-operate pipe valve made of brass controllable water flow (up to 11 liters / minute) connection from top and bottom possible easy cleaning by drain plug pipe and wall mounting 2.8 liter tank volume 3/4 "water connection Dimensions: outside measures - 16 x 26 cm water bowl - 2.8 liters 3/4 "water connection Delivery: 1x Kerbl water bowl K75 plastic 3/4-inch water connection Note: Mounting material is not included!

€55.99*
Pcs.