Kerbl Technobase 8000 Hoof Treatment System for Cattle, Flüssigkeit 500 ml

Technobase 8000: reliable hoof treatment system for cattle

The Technobase 8000 is a modern hoof treatment system for immobilising injured or diseased claws. It can be shaped immediately after mixing and is suitable for a wide range of veterinary applications.

Once powder and liquid are combined, the paste stays tack-free and workable so it can be modelled by hand straight away. Technobase 8000 cures in under 4 minutes at 20 °C product temperature and bonds firmly to the wooden block, relieving the affected claw until the block wears down. Low exothermic heat build-up during curing also allows safe use for extracutaneous splinting.

Overview:

• Workable immediately after mixing
• Cures in under 4 minutes at 20 °C product temperature
• Tack-free modelling until final polymerisation
• Firm bond between claw and wooden block
• Low exothermic heat load during curing
• Used in practice by professional hoof trimmers

Application & Notes:

• Mix powder and liquid in the specified ratio and apply immediately
• Shape the paste by hand or with the wooden spatula
• Only use in well-ventilated areas, away from open flames and ignition sources
• Wear protective gloves and eye protection while handling
• Wash off any skin contact thoroughly with water and soap
• Dispose of leftovers properly, avoid release into the environment

Technical Data:

• Universal plastic (powder/liquid polymer system) for veterinary use
• Curing time: under 4 minutes at 20 °C product temperature
• Available as a set (4 or 14 applications), liquid 500 ml, powder 1000 g, or wooden spatula

Scope of Delivery:

1x Depending on the chosen variant:
1x set with powder and liquid (4 or 14 applications)
1x liquid 500 ml
1x powder 1000 g
1x wooden spatula

Questions & Answers:

How long does Technobase 8000 stay workable after mixing?
The paste remains mouldable until final polymerisation and fully cures in under 4 minutes at 20 °C product temperature.

What is the wooden spatula used for?
It is used to apply and shape the mixed paste evenly onto the wooden block.

Can I buy only the powder or only the liquid?
Yes, both powder and liquid are available separately as refill packs.

Hazard information:

Always follow the information on the product label.

Signal word: Danger

UFI: E90N-23DQ-100S-VHWW

Hazard statements (H):

• H225: Highly flammable liquid and vapour.
• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H317: May cause an allergic skin reaction.
• H335: May cause respiratory irritation.

Hazard-determining components: 2-Hydroxyethylmethacrylat; Methylmethacrylat; Methacrylsäureamid; 2,2'-((4-

Precautionary statements (P):

• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water/….
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P308+P311: IF exposed or concerned: Call a POISON CENTER/doctor/….

Use biocides safely. Always read the label and product information before use.