Kerbl Wooden Block Standard for Cattle Claw Care, 112 mm

Technobase 8000: reliable hoof treatment system for cattle The Technobase 8000 is a modern hoof treatment system for immobilising injured or diseased claws. It can be shaped immediately after mixing and is suitable for a wide range of veterinary applications. Once powder and liquid are combined, the paste stays tack-free and workable so it can be modelled by hand straight away. Technobase 8000 cures in under 4 minutes at 20 °C product temperature and bonds firmly to the wooden block, relieving the affected claw until the block wears down. Low exothermic heat build-up during curing also allows safe use for extracutaneous splinting. Overview: Workable immediately after mixing Cures in under 4 minutes at 20 °C product temperature Tack-free modelling until final polymerisation Firm bond between claw and wooden block Low exothermic heat load during curing Used in practice by professional hoof trimmers Application & Notes: Mix powder and liquid in the specified ratio and apply immediately Shape the paste by hand or with the wooden spatula Only use in well-ventilated areas, away from open flames and ignition sources Wear protective gloves and eye protection while handling Wash off any skin contact thoroughly with water and soap Dispose of leftovers properly, avoid release into the environment Technical Data: Universal plastic (powder/liquid polymer system) for veterinary use Curing time: under 4 minutes at 20 °C product temperature Available as a set (4 or 14 applications), liquid 500 ml, powder 1000 g, or wooden spatula Scope of Delivery: 1x Depending on the chosen variant:1x set with powder and liquid (4 or 14 applications)1x liquid 500 ml1x powder 1000 g1x wooden spatula Questions & Answers: How long does Technobase 8000 stay workable after mixing?The paste remains mouldable until final polymerisation and fully cures in under 4 minutes at 20 °C product temperature. What is the wooden spatula used for?It is used to apply and shape the mixed paste evenly onto the wooden block. Can I buy only the powder or only the liquid?Yes, both powder and liquid are available separately as refill packs.Hazard information:Always follow the information on the product label.Signal word: DangerUFI: E90N-23DQ-100S-VHWWHazard statements (H):H225: Highly flammable liquid and vapour.H315: Causes skin irritation.H319: Causes serious eye irritation.H317: May cause an allergic skin reaction.H335: May cause respiratory irritation.Hazard-determining components: 2-Hydroxyethylmethacrylat; Methylmethacrylat; Methacrylsäureamid; 2,2'-((4-Precautionary statements (P):P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P261: Avoid breathing dust/fume/gas/mist/vapours/spray.P280: Wear protective gloves/protective clothing/eye protection/face protection.P302+P352: IF ON SKIN: Wash with plenty of water/….P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P308+P311: IF exposed or concerned: Call a POISON CENTER/doctor/….Use biocides safely. Always read the label and product information before use.

Technobase 2CB – reliable two-component adhesive for professional hoof careTechnobase 2CB is a proven two-component adhesive used to attach wooden or rubber blocks securely and permanently to the healthy claw, relieving the affected claw and supporting the healing process. The blue colouring shows immediately when the mixture is correct, helping you avoid application errors.The special formula has been optimised for curing speed, viscosity and hardness, so you can work precisely at both 45° and 90° angles. The claw is fully loadable again within just a few minutes – a real advantage during a busy day in the barn. The high-quality cartridge can be opened and resealed without tools, saving you time and reducing waste.Overview:Adheres strongly and permanently to wooden and rubber blocksBlue colouring shows correct mixture immediatelyApplication possible at 45° and 90° anglesResealable cartridge, no tools requiredSpecial mixer cannulas ensure exact mixing ratioNo separate mixing step neededTechnical data:Cartridge content: 200 mlMixer cannulas: 12 piecesReaction time above 25°C: approx. 15 secondsReaction time at 15–25°C: approx. 20 secondsStorage: steady conditions at 15–20°CScope of delivery:1x Cartridge 200 ml1x Mixer cannulas, 12 piecesFAQ:How long until the claw is loadable again?After approx. 3 minutes the glued claw is fully loadable again if stored correctly above 15°C.Which blocks can be used with this adhesive?Technobase 2CB adheres strongly and permanently to both wooden and rubber blocks.How should I store the adhesive?Keep it at a constant 15–20°C throughout summer and winter for optimal curing results.