Kerbl Wooden Block Standard for Cattle Claw Care, Available in Two Sizes, 112 mm

Technobase 8000 is a modern claw treatment system for the immobilization of injured or diseased claws! In addition, a wide variety of applications in the veterinary field can be realized. Fast processing: can be modeled immediately after mixing. This facilitates the processing immensely. Technobase 8000 cures at 20 ° C product temperature in less than 4 minutes! Holds bombproof: Technobase has excellent adhesive properties! Thus, you can be sure that the diseased claw is optimally relieved to the wear of the wood block. Tack-free modeling: The dough remains flexibly formable and processable until final polymerization. Low exothermic temperature load: As a result of the chemical reaction when mixing liquid and powder, large heat is generated. These high temperatures are often tissue-damaging and painful to the animal. Technobase has also been improved in this regard! So z. B. extracutaneous splints safely and without tissue impairments are performed. Recommended by professional claw carers! Size: Set - 14 applications Set - 4 applications Liquid 500 ml Powder 1000 g wooden spatula

Technobase 2CB – reliable two-component adhesive for professional hoof careTechnobase 2CB is a proven two-component adhesive used to attach wooden or rubber blocks securely and permanently to the healthy claw, relieving the affected claw and supporting the healing process. The blue colouring shows immediately when the mixture is correct, helping you avoid application errors.The special formula has been optimised for curing speed, viscosity and hardness, so you can work precisely at both 45° and 90° angles. The claw is fully loadable again within just a few minutes – a real advantage during a busy day in the barn. The high-quality cartridge can be opened and resealed without tools, saving you time and reducing waste.Overview:Adheres strongly and permanently to wooden and rubber blocksBlue colouring shows correct mixture immediatelyApplication possible at 45° and 90° anglesResealable cartridge, no tools requiredSpecial mixer cannulas ensure exact mixing ratioNo separate mixing step neededTechnical data:Cartridge content: 200 mlMixer cannulas: 12 piecesReaction time above 25°C: approx. 15 secondsReaction time at 15–25°C: approx. 20 secondsStorage: steady conditions at 15–20°CScope of delivery:1x Cartridge 200 ml1x Mixer cannulas, 12 piecesFAQ:How long until the claw is loadable again?After approx. 3 minutes the glued claw is fully loadable again if stored correctly above 15°C.Which blocks can be used with this adhesive?Technobase 2CB adheres strongly and permanently to both wooden and rubber blocks.How should I store the adhesive?Keep it at a constant 15–20°C throughout summer and winter for optimal curing results.