AKO Sun Power S 3000 electric fence energiser, solar 30 Watt, 4.20 Joule

Galvanised ground rod 1 m – reliable earthing for your electric fence The AKO ground rod provides reliable earthing for your paddock or electric fence system. Made from hot-dip galvanised T-steel, it is exceptionally robust and weather-resistant, making it ideal for permanent outdoor use. Thanks to the M6 stainless steel screw, the earth connection cable can be fitted quickly and securely. Additional M8 and M12 drill holes allow the connection of earth cables with a wire terminal clamp, giving flexibility for different connection systems. It provides the foundation for reliable containment on horse, cattle, sheep and goat pastures. Overview: Reliable earthing for electric and paddock fences Hot-dip galvanised T-steel resists corrosion permanently M6 stainless steel screw for the earth connection cable Additional M8 and M12 drill holes for wire terminal clamp Suitable for horse, cattle, sheep and goat pastures Easy to drive into moist soil Technical Data: Length: 100 cm Width: 3 cm Height/profile: 2.5 cm Weight: approx. 1.4 kg Material: hot-dip galvanised T-steel Connection: M6 stainless steel screw, plus M8 and M12 drill hole Scope of Delivery: 1x galvanised ground rod, 1 m1x M6 stainless steel screw FAQ: How deep should I drive the ground rod?Drive it as deep as possible into moist soil, as this closes the electrical circuit most effectively. How many ground rods do I need?When using several rods, keep a distance of at least 3 metres between each one. Why should the ground rod be galvanised?Rust has an insulating effect and hinders the voltage return to the fence energiser – galvanised steel prevents this.

Electric Fence Lightning Choke: Reliable Surge Protection A lightning strike on your fence line can destroy your electric fence unit within seconds. The AKO lightning choke safely discharges the resulting surge, protecting your fence energiser from costly damage. This is especially important where the fence cable is routed into a building. The unit consists of a lightning choke and spark gap and is fitted to non-flammable material on the outside wall of the building before the fence line is connected to the energiser. This keeps surges away from the unit and channels them safely to earth. The same applies to combi units once they're run from a mains adapter, where surge protection is a mandatory requirement under VDE regulations. Overview: Protects your fence energiser from lightning-induced surges Consists of a lightning choke and spark gap Screw-fit to non-flammable surfaces Galvanised metal housing for long-lasting corrosion resistance Mandatory when the energiser is installed inside a building (per VDE) Also suitable for combi units run via mains adapter Technical Data: Material: galvanised metal Dimensions: approx. 31.5 x 20 x 4.5 cm Weight: approx. 0.37 kg Mounting: screw-fixed to building wall Package Contents: 1x lightning choke for electric fence1x spark gap FAQ: Where should I mount the lightning choke?Fit it to the outside wall on non-flammable material, before the fence line connects to the energiser. Do I also need a fence switch?A fence switch is a useful addition, letting you isolate the fence from the unit before a storm arrives; the choke works independently of this. Is surge protection needed for solar or battery units too?It's mandatory under VDE mainly for mains-powered or combi units with a mains adapter installed inside buildings.

Ground anchor for solar panel – secure hold without digging The ground anchor for solar panels from Kerbl keeps your solar-powered electric fence energizer firmly in place without the need to dig a foundation. This spiral earth screw is ideal for anchoring the Sun Power S 800, S 1500 and S 3000 on pasture or farmyard. Instead of time-consuming digging, simply screw the 1.2 metre long earth rod vertically into the ground – done in just a few minutes with the included assembly tool. Made from durable, hot-dip galvanised T-steel, the anchor holds your solar module securely in place, even in changing weather conditions. Overview: Quick installation without digging – simply screw into the ground Stable support for your solar module on pasture or farmyard Hot-dip galvanised T-steel protects against corrosion for long service life Compatible with Sun Power S 800, S 1500 and S 3000 Includes thread and assembly tool for immediate use Technical Data: Total height: 120 cm (incl. thread) Dimensions: approx. 120 x 9.8 x 7 cm Weight: 7.5 kg Material: hot-dip galvanised T-steel Solar module not included Scope of Delivery: 1x spiral ground/retaining anchor1x assembly tool FAQ: Is the solar module included?No, the anchor is supplied without the solar module and is used only to secure it in the ground. Which devices is this anchor suitable for?It fits the Sun Power S 800, S 1500 and S 3000 solar energizers. Do I need extra tools?No, the assembly tool needed to screw in the anchor is already included.

Theft-proof post holder for Sun Power solar fence energisers This post holder from Kerbl secures your Sun Power solar energiser firmly to a wooden fence post – ideal for farmers who want to protect their electric fence unit from theft. The sturdy stainless steel bracket is designed for mounting directly on a wooden post and fits the Sun Power S 800, S 1500 and S 3000 models. Thanks to the pre-drilled mounting screw and included padlock, the solar unit can be locked firmly onto the post – a real advantage for remote paddocks and pastures without constant supervision. The stainless steel construction withstands rain, frost and intense sun for years. All required metal and wood screws are included, so mounting on the post works straight away without extra purchases. Overview: Secure fixing of the solar unit directly on the wooden post Protects against theft with an integrated locking system Weatherproof stainless steel design for long service life Comes complete with screws – no extra parts needed Fits Sun Power S 800, S 1500 and S 3000 Technical Data: Material: stainless steel Dimensions: approx. 18.5 x 14 x 11.5 cm (L x W x H) Weight: approx. 0.66 kg Compatible with: Sun Power S 800 / S 1500 / S 3000 Scope of Delivery: 1x post holder for Sun Power units1x padlock1x spare key1x set of metal and wood screws FAQ: Is the Sun Power solar unit included?No, the post holder is supplied without the solar unit. You can order it separately from Agrarzone. Which Sun Power models fit this holder?It fits the Sun Power S 800, S 1500 and S 3000 models. Is the holder theft-proof?Yes, thanks to the pre-drilled mounting screw and included padlock, the solar unit can be secured against theft.