Kerbl Walkease Hoof Block Starter Kit – EVA Block with Instant Adhesive, blue size L

Fast Hoof Relief with the Walkease Starter Kit

The Walkease Starter Kit combines a cushioned EVA hoof block with a fast-curing special adhesive, allowing quick relief for sore or overloaded claws in cattle. This hoof treatment is designed for early intervention in hoof problems and helps support an even gait.

Unlike traditional bonding systems, there's no need to mix liquids and powders – the instant adhesive is applied directly to the block, and after a short press time the hoof can bear weight again. The special EVA material cushions impact and promotes even wear, making it suitable even for thin or sensitive claws.

Overview:

• Cushioned EVA material absorbs impact
• No mixing of liquids and powders required
• Hoof can bear weight again after a short press time
• Small amount of adhesive provides secure grip
• Even wear thanks to special material
• Suitable for thin and sensitive claws

Application & Notes:

• Clean and dry the hoof thoroughly before application
• Prepare the hoof surface with a special hoof rasp for optimal adhesion
• Apply adhesive to the block and press firmly for around 10 seconds
• Wear protective gloves and avoid skin contact with the adhesive
• Use only in a well-ventilated area and keep the container tightly closed
• Keep out of reach of children

Technical Data:

• Hoof block material: EVA (ethylene vinyl acetate)
• Adhesive type: cyanoacrylate instant adhesive
• Application area: cattle

Contents:

10x hoof blocks
1x special adhesive (10 x 2 ml)
1x hoof rasp
1x disposable gloves
1x instructions

Questions & Answers:

How long does the hoof block last?
Depending on load and surface, the block typically stays in place for several weeks and doesn't need to be actively removed.

Which claws is the kit suitable for?
The kit is suitable for healthy inner claws as well as thin or sensitive inner and outer claws in cattle.

Why is hoof preparation so important?
Only a clean, dry surface prepared with the rasp ensures secure and lasting adhesion of the block.

Hazard information:

Always follow the information on the product label.

Signal word: Warning

Hazard statements (H):

• H315: Causes skin irritation.
• H319: Causes serious eye irritation.
• H335: May cause respiratory irritation.

Hazard-determining components: Ethyl-2-cyanacrylat

Supplemental hazard information (EUH):

• EUH202: Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

Precautionary statements (P):

• P102: Keep out of reach of children.
• P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280: Wear protective gloves/protective clothing/eye protection/face protection.
• P302+P352: IF ON SKIN: Wash with plenty of water/….
• P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P403+P233: Store in a well-ventilated place. Keep container tightly closed.
• P405: Store locked up.
• P501.9: Dispose of contents/container to..