Buying a poultry flap: Secure access for your poultry

Agrarzone Chicken Flap - Automatic opening and closing of chicken doors With the automatic chicken door, chicken flaps, doors or sliders on poultry houses can be automatically opened and closed depending on the time of day or brightness. The electronic slider opens and closes your chicken door as needed. The chicken flap opens the vertical gate to your poultry or chicken coop when it gets light and closes it again when it gets dark. In addition, manual operation of the device is also possible. This can be done directly on the device or via manual button. The sensitivity of the integrated twilight switch is easily adjustable, so that unintentional opening is prevented in the event of thunderstorm flashes or near-matched luminaires or hall floodlights. If an animal is under the pusher during the closing process of the automatic chicken flap, the engine of the chicken door gatekeeper will automatically stop when placed and will continue closing when the animal has cleared. The function of the Agrarzone Chicken Flap: The integrated motor of the automatic chicken door is controlled by a twilight switch and thus the opening or closing of a vertical slide is realized by means of a cable pull. In addition, manual operation is possible. The housing of the automatic chicken door is extremely stable and protects the fine electronics from moisture, dirt and sunlight. Slightly protected, the electronic slider, thanks to its extremely durable components, lasts a very long time. The automatic chicken flap has several functions for opening / closing the flap: Light sensor: The chicken flap is controlled by daylight with light sensor. Timer: Control of the chicken door is time-dependent. You can differentiate between weekdays and Weekends. Manual control: directly on the device or via a connected push-button. Overview: Automatic Chicken Flap Mains operation and battery operation possible Daylight-dependent control with light sensor Time-dependent control Manual control, on the device or via connected push-button Delivery: Control with integrated motor and cable Power adapter 230V Batteries (4 x AA, already in the device) light sensor Pulley set (4 pieces) operation manual Assembly of the chicken flap: The assembly of the electronic chicken door is very simple: first you assemble the slide, pull it into the open position, mount the chicken flap device so that you can connect it through the loop with the slider (rolled cord = delivery state!). Then insert the batteries - done! Plan the mounting situation and above all the line guidance from the chicken door to the device. Measure the opening of the chicken flap and provide a suitable sliding door with guide rails. Suitable slides and additional pulleys can be found as accessories in our shop. If you want to supply the automatic chicken door with mains voltage, make sure that a 230 Volt outlet is available nearby. The power supply and the mounting location of the device must be protected against rainfall. The automatic chicken flap is not compatible with valves or flaps that have a self-locking feature. Technical specifications: Min. Gate weight: 0.5 kg Max. Gate weight: 2.5 kg Max. Lifting height: 60 cm Power supply: 230 Volt mains operation (power supply for 12 Volt operation) or battery operation (4 x AA) Models: Automatic chicken door without slider Automatic chicken flap with slider 22 x 33 cm (for normal chickens) Automatic chicken flap with slide 30 x 40 cm (for normal and larger chickens) Automatic chicken flap with slide 43 x 40 cm (suitable for keeping for commercial purposes in accordance with TierschNutztV)

Automatic Chicken Door Solar WILMA - Electric Chicken Flap for Chicken Coop The electric chicken door opens and closes chicken flaps, doors or sliders on chicken coops automatically by dusk, time or manual. With the automatic chicken flap, you no longer have to be at the chicken house on time every evening and every morning to open the chicken door. The electric chicken flap from Agrarzone opens and closes your chicken door on poultry and chicken houses fully automatically. The chicken flap WILMA has several functions for opening or closing the flap. The poultry flap opens the vertical slider to your poultry or chicken house with light sensor when it gets light and closes the door again as soon as it gets dark. The control of the chicken door can also be done with timer function. It is also possible to combine the light sensor and timer modes. The operation of the opening and closing function can also be operated directly on the unit. Due to the solar module, the automatic chicken flap WILMA is designed for energy-autonomous continuous use. The housing of the self-opening chicken door is extremely sturdy and protects the fine electronics from moisture, dirt and sunlight. Placed in a slightly protected position, the electronic slider lasts an extremely long time due to its very durable components. Functions of the chicken door: Light sensor: This mode is used to automatically open the coop door at dawn and close it at dusk. Timer: The timer function is used to open the coop door automatically in the morning at the time you have set. In the evening, you can set the time when the chicken flap should close automatically. Light sensor & Timer: A mix of the light sensor and timer modes is possible. If you select this, the previously set light level is used for closing. If it is not dark enough to trigger the light sensor, the set time is used for closing. Manual: The opening and closing mechanism can be operated directly on the appliance. Overview: Fully automated chicken door for the chicken coop Solar operation for energy-autonomous use Daylight-dependent control with light sensor Time-dependent control with time switch Combination of sensor and timer modes possible Manual control on the unit Agrarzone Premium quality Technical data: Power supply: 240 V / 4 x AA batteries Supply voltage: 4,5 - 7,4 V Housing material: ASA Supply current: 0,15 mA Power of solar panel: 2 Watt Weight: approx. 0,5 kg Nominal weight of door: less than 1,5 kg Dimensions control unit (LxWxH): 28,5 x 9,5 x 6,9 cm Solar module dimensions (LxWxH): 18,5 x 13,5 x 7 cm Models: Electric Chicken Door Solar without slider Electric Chicken Door Solar with slider 22 x 33 cm (for normal chickens) Electric Chicken Door Solar with slider 30 x 40 cm (for normal and larger chickens) Scope of delivery: Electric control with integrated motor and cable pull Slider (depending on selected model) Solar panel 2 Watt Operating instructions

Agrarzone Automatic Chicken Door Solar With the automatic chicken door, chicken flaps, doors or sliders on poultry houses can be opened and closed automatically depending on the time of day or brightness. The electronic slider opens and closes your chicken door as needed. The chicken flap opens the vertical gate to your poultry or chicken coop when it gets light and closes it again when it gets dark. In addition, manual operation of the device is also possible. This can be done directly on the device or via manual button. The sensitivity of the integrated twilight switch is easily adjustable, so that unintentional opening is prevented in the event of thunderstorm flashes or near-matched luminaires or hall floodlights. If an animal is under the pusher during the closing process of the automatic chicken flap, the engine of the chicken door gatekeeper will automatically stop when placed and will continue closing when the animal has cleared. The function of the Agrarzone Chicken Flap: The integrated motor of the automatic chicken door is controlled by a twilight switch and thus the opening or closing of a vertical slide is realized by means of a cable pull. In addition, manual operation is possible. The housing of the automatic chicken door is extremely stable and protects the fine electronics from moisture, dirt and sunlight. Slightly protected, the electronic slider, thanks to its extremely durable components, lasts a very long time. The automatic chicken flap has several functions for opening / closing the flap: Light sensor: The chicken flap is controlled by daylight with light sensor Timer: Control of the chicken door is time-dependent. You can differentiate between weekdays and weekends Manual control: directly on the device or via a connected push-button Overview: Automatic Chicken Flap Mains operation and battery operation possible Daylight-dependent control with light sensor Time-dependent control Manual control, on the device or via connected push-button Solar panel with battery: Just 7 sunny days per year are sufficient for safe continuous operation Mounting kit for variable attachment of the solar module included A total of 5 m of cable for flexible installation An LED indicates when there is sufficient sunlight for the charging process Suitable for outdoor use Delivery: Control with integrated motor and cable Power adapter 230V Batteries (4 x AA, already in the device) light sensor Pulley set (4 pieces) Operation manual Assembly of the chicken flap: The assembly of the electronic chicken door is very simple: first you assemble the slide, pull it into the open position, mount the chicken flap device so that you can connect it through the loop with the slider (rolled cord = delivery state!). Then insert the batteries - done. Plan the mounting situation and above all the line guidance from the chicken door to the device. Measure the opening of the chicken flap and provide a suitable sliding door with guide rails. Suitable slides and additional pulleys can be found as accessories in our shop. If you want to supply the automatic chicken door with mains voltage, make sure that a 230 Volt outlet is available nearby. The power supply and the mounting location of the device must be protected against rainfall. The automatic chicken flap is not compatible with valves or flaps that have a self-locking feature. Technical specifications: Min. Gate weight: 0.5 kg Max. Gate weight: 2.5 kg Max. Lifting height: 60 cm Power supply: 230 Volt mains operation (power supply for 12 Volt operation) or battery operation (4 x AA) Models: Automatic chicken door solar without slider Automatic chicken door solar with slider 22 x 33 cm Automatic chicken door solar with slider 30 x 40 cm Automatic chicken door solar with slider 43 x 40 cm

Slider for automatic chicken door Slider for automatich chicken door The automatic chicken door slider is an accessory for the automatic chicken door. The sliding door is specially designed for automatic chicken doors and is available in three different sizes. With the automatic chicken door, the flaps, doors or sliders can be opened and closed automatically on poultry houses. Sizes: 220 x 330 mm, aluminium, complete assembly set (incl. guide rails) 300 x 400mm, aluminium, complete assembly set (incl. guide rails) 430 x 400 mm, aluminium, complete assembly set (incl. guide rails) Note: The control unit is not included in the delivery.

Kerbl Automatic Chicken Door with slider The automatic chicken door allows the flaps, doors or sliders in poultry stalls to be automatically opened and closed. The automatic chicken door has various functions for opening and closing the slider: Functions: Daylight-dependent control with light sensor Time-dependent control, can differentiate between weekdays and weekends Manual control, on the unit or via connected switch The automatic chicken door is fitted with safety features. A time delay on the light signal prevents unwanted opening during lightning. If the slider encounters resistance by an animal when closing, the process is stopped and then repeated. Delivery: 1 x control with integrated motor and cable 1 x sliding door 1 x AC adapter 1 x batteries 1 x light sensor 1 x pulley set 1 x instruction manual

Control for SmartCoop Chicken Coop System The control unit forms the heart of the SmartCoop System as it interconnects and programs all modules. The 12 slots inside the housing enable a flexible configuration. There is one slot for the power supply and eleven slots for modules. All modules are available separately, so you have the possibility to adapt the SmartCoop system individually to your needs. The SmartCoop control system has an integrated light sensor this enables a daylight-dependent control of the SmartCoop modules. The LED status display provides a quick overview of the current status of the system. The impact-resistant and dustproof plastic housing protects the of the control unit protects the SmartCoop system from damage and ensures a long service life. Nevertheless, we recommend installing the control in an easily accessible location of your chicken house, protected from the weather (uv radiation, moisture). The additionally available connectivity module allows convenient programming via app. This allows easy control of the different SmartCoop modules and quick adaptation to changing requirements. Other available accessories such as the coop lighting, the temperature sensor, the external daylight sensor, the coop ventilation, the drinker heating and much more make the SmartCoop system individually adaptable to your requirements and needs. Overview: Control for SmartCoop modules individually configurable Flexible configuration due to 12 slots in the housing Integrated daylight sensor LED status display Impact-resistant, dust-proof plastic housing Large, illuminated Display Many accessories available separately Voltage: 230 v Operating voltage: 12 v Scope of Delivery: 1x SmartCoop Control System 1x 230 V power supply unit 1x Mounting screw set 1x Clamping bridges with mounting screws Note: All accessories are sold separately.

SmartCoop Chicken Door Starter Set with Lighting The SmartCoop Starter Set provides everything you need for modern and automated chicken keeping. This set consists of a control unit, a chicken door, and a lighting unit, perfectly coordinated with each other. The control unit is the heart of the SmartCoop system. With 12 slots, an integrated light sensor, and an LED status indicator, it enables flexible and daylight-dependent control of the modules. Despite its robust housing, the control unit should be installed in a weather-protected location in the chicken coop. The automatic chicken door ensures your chickens can enter and exit safely. It can be automatically opened and closed based on daylight or schedules. The included LED chicken coop lighting ensures optimal illumination in the coop. It can also be regulated via the control unit to adapt the lighting conditions to your chickens' needs. The connectivity module allows convenient control and programming of the system via an app. Additional accessories such as coop lighting, temperature sensors, an external daylight sensor, coop ventilation, and water heater are available separately to make the SmartCoop system even more versatile. Overview Automatic chicken door with lighting Control unit for SmartCoop modules individually configurable Flexible configuration with 12 slots in the housing Integrated daylight sensor LED status indicator Impact-resistant, dustproof plastic housing Large, illuminated display Many accessories available separately Voltage: 230 V Operating voltage: 12 V Scope of Delivery 1x SmartCoop control unit with 230 V power supply 1x LED chicken coop lighting 1x chicken door 1x set of mounting screws 1x terminal bridges with mounting screws Note: Additional modules are available separately. FAQ How do I install the SmartCoop control unit? The control unit should be installed in an easily accessible location in the chicken coop that is protected from weather influences. Attach the control unit using the set of mounting screws and then connect it to the necessary modules and power supply. What additional modules are available? Numerous additional modules are available, including coop lighting, temperature sensors, an external daylight sensor, coop ventilation, and water heater. These can be purchased separately and integrated into the existing system to tailor it to your specific requirements.

Kerbl Automatic Chicken Door - electric door opener for henhouse The automatic chicken door allows the flaps, doors or sliders in poultry stalls to be automatically opened and closed. The automatic chicken door has various functions for opening and closing the slider: Daylight-dependent control with light sensor Time-dependent control, can differentiate between weekdays and weekends Manual control, on the unit or via connected switch The automatic chicken door is fitted with safety features. A time delay on the light signal prevents unwanted opening during lightning. If the slider encounters resistance by an animal when closing, the process is stopped and then repeated.Included in scope of delivery: control with integrated motor and cable, AC adapter, batteries, light sensor, pulley set, instruction manual

Kerbl Automatic Chicken Door - never change batteries again With the Kerbl Automatic Chicken Door, sliders on poultry and chicken houses can be automatically opened and closed depending on the time of day or brightness. The electronic slider opens and closes your chicken door as needed. The chicken flap opens the vertical gate to your poultry or chicken coop when it gets light and closes it again when it gets dark. In addition, manual operation of the device is also possible. This can be done directly on the device or via manual button. The sensitivity of the integrated twilight switch is easily adjustable, so that unintentional opening is prevented in the event of thunderstorm flashes or near-matched luminaires or hall floodlights. If an animal is under the pusher during the closing process of the automatic chicken flap, the engine of the chicken door gatekeeper will automatically stop when placed and will continue closing when the animal has cleared. The function of the Kerbl Chicken Door: The integrated motor of the automatic chicken door is controlled by a twilight switch and thus the opening or closing of a vertical slide is realized by means of a cable pull. In addition, manual operation is possible. The housing of the automatic chicken door is extremely stable and protects the fine electronics from moisture, dirt and sunlight. Slightly protected, the electronic slider, thanks to its extremely durable components, lasts a very long time. The automatic chicken flap has several functions for opening / closing the flap: Light sensor: The chicken flap is controlled by daylight with light sensor Timer: Control of the chicken door is time-dependent. You can differentiate between weekdays and weekends Manual control: directly on the device or via a connected push-button Overview: Automatic Chicken Flap Mains operation and battery operation possible Daylight-dependent control with light sensor Time-dependent control Manual control, on the device or via connected push-button Delivery: Chicken Door controler with integrated motor and cable Power solar module 10 W with 2.200 mAh capacity Power adapter 230V Batteries (4x AA, already in the device) light sensor Pulley set (4 pieces) operation manual Assembly of the chicken door: The assembly of the electronic chicken door is very simple: first you assemble the slide, pull it into the open position, mount the chicken flap device so that you can connect it through the loop with the slider (rolled cord = delivery state!). Then insert the batteries - done. Plan the mounting situation and above all the line guidance from the chicken door to the device. Measure the opening of the chicken flap and provide a suitable sliding door with guide rails. Suitable slides and additional pulleys can be found as accessories in our shop. If you want to supply the automatic chicken door with mains voltage, make sure that a 230 Volt outlet is available nearby. The power supply and the mounting location of the device must be protected against rainfall. The automatic chicken flap is not compatible with valves or flaps that have a self-locking feature. Technical specifications: Min. Gate weight: 0.5 kg Max. Gate weight: 2.5 kg Max. Lifting height: 60 cm Power supply: 230 Volt mains operation (power supply for 12 Volt operation) or battery operation (4 x AA)

Solar Battery Set for Automatic Chicken Door Make your automatic chicken door completely energy self-sufficient - no more battery changes Solar-Set for Chicken Door at a glance: just 7 days of sunshine per year are enough for trouble-free continuous operation mounting kit included for various ways of installing the solar module a total of 5 m of cable for flexible installation an LED indicates when solar radiation is sufficient for the charging process suitable for outdoor use usable from version 1.3 of the automatic chicken door Technical data Solar module voltage: 6 V DCPower solar module: 10 WBattery voltage: 3,7 VCapacity: 2.200 mAhBattery technology: LiPoWeight: 1,18 kgProtection class: IP65

retrofit kit for the sliding door after reaching the lower stop, spring coils push the bolts outwards and lock the door so that it can no longer be raised easy assembly thanks to slot-in system complete set with all necessary screws Note: chicken door not included

SmartCoop Pull Cord Chicken Flap Are you looking for a reliable and easy-to-use solution for your automatic chicken flap? Then the SmartCoop pull cord for chicken flaps is the perfect choice! In combination with the SmartCoop control system, the cord hoist offers several operating modes and an automatic chicken flap control which allows individual settings. The different operating modes allow the door to be time-controlled, light-controlled or manually to open and close. In this way, it is ensured that the chickens get run but also house rest at any time. The wire rope hoist supports chicken doors with a maximum weight of 3 kg and can be easily mounted on any door. The integrated extraneous light detection prevents the automatic chicken flap from opening due to unexpected light such as a passing car or a thunderstorm. This way, your chickens will always stay safe in the coop. The pulley operates exclusively with the SmartCoop smart control system, which allows for easy setup and remote control. The Smartcoop chicken door pull cord is supplied with a 200 cm long connection cable supplied. Overview: Multiple operating modes: time-controlled, light-controlled, manually controlled Integrated extraneous light detection prevents unintentional opening Maximum chicken flap weight of 3 kg SmartCoop control required Incl. 200 cm connection cable Scope of delivery: 1x SmartCoop Pull Cord Chicken Flap

Automatic Chicken Door Basic Set incl. Manual Control. With the automatic chicken door basic, taking care of your chickens becomes even easier and more convenient. Thanks to the daylight-dependent control with light sensor, the chicken flap opens and closes automatically without you having to do anything. The light sensor with 1 m cable length allows flexible mounting of the control indoors. In addition to the automatic control, the chicken door basic set also includes a manual control via an external switch. This is equipped with a 5 m long cable so that the switch can be attached anywhere around the chicken coop. Once the chicken flap has been opened manually, it remains open and closes again automatically in the evening when darkness falls. If the chicken door was closed manually, it remains closed until the next morning and then opens automatically. The control opens and closes a slider weight of at least 0.5 kg and a maximum of 2.5 kg, which is sufficient for most chicken houses. The automatic chicken flap is operated with 4 x AA Mignon batteries, which are, however, not included in the scope of delivery. The device is maintenance-free, but should be cleaned thoroughly on a regular basis. I Safety functions: To prevent accidental opening in the event of flashing lights or short-term brightness such as headlights, the light signal is provided with a delay. If an animal blocks the slider during the closing process, the unit automatically stops the process and then resumes it to prevent injury to the animals. The automatic shut-off in case of motor overload provides additional safety and prevents damage to the chicken flap. Overview: Automatic chicken flap battery Daylight-dependent control with light sensor Manual control via external switch optional Practical safety functions Pull cord for slider included Maintenance-free Technical data: Min. pusher weight 0.5 kg Max. pusher weight Max. slider weight 2.5 kg External push-buttons each with normally open contact for "Up" + "Down 4 AA batteries (not included in delivery) Models: Automatic Chicken Door Basic Set without slider. Automatic Chicken Door Basic Set with slider 22 x 33 cm (for normal chickens) Automatic Chicken Door Basic Set with slider 30 x 40 cm (for normal and larger chickens) Automatic Chicken Door Basic Set with slider 43 x 40 cm (suitable for keeping for commercial purposes according to TierschNutztV)

Replacement screw for control cover chicken door

Pulleys for Automatic Chicken Door (4-pack) Pulleys 4-pack for chicken door colour: red

Automatic Chicken Door EasyProtect The automatic chicken door EasyProtect provides a convenient and secure solution to automatically open and close your chicken door. With the built-in control, which is already prepared for easy installation on the sliding door, you can ensure that your animals are protected from unwanted intruders. The daylight-dependent control with a light sensor and the time-dependent control, which distinguishes between weekdays and weekends, offer you flexible control options. Moreover, the door can also be operated manually via the device or an optional external push button. The easy installation and the compact design make it possible to install it on many small poultry houses. The door can be operated either with 230 Volt mains power or with batteries (4 x AA Mignon). The sliding weight ranges from min. 0.5 kg to max. 2.5 kg. Safety features such as the timed delay of the light signal, stopping when resistance is encountered during closing, and the integrated self-locking ensure that your animals are safe at all times. The door is made of aluminum, which makes it particularly durable and robust. The use of aluminum also guarantees easy cleaning and maintenance. The automatic chicken door EasyProtect is particularly suitable for those who are looking for a safe and reliable method to protect their poultry houses while enjoying the convenience of automated door control. Overview: automatic chicken door EasyProtect daylight-dependent and time-dependent control manual control possible easy installation compact design 230 Volt mains or battery operation Sliding weight: min. 0.5 kg, max. 2.5 kg aluminum door Safety features: timed delay, stopping when resistance is encountered, self-locking Technical Data: Control: integrated, motor-driven Operation: 230 Volt mains or 4 x AA Mignon batteries Sliding weight: min. 0.5 kg, max. 2.5 kg Material door: aluminum Safety features: timed delay, stopping when resistance is encountered, self-locking Delivery Content: 1 x EasyProtect control with integrated motor and cable pull 1 x aluminum sliding door 1 x 230 Volt power supply 4 x AA Mignon batteries 1 x light sensor 1 x mounting screws 1 x user manual FAQ How is the automatic chicken door EasyProtect operated? The automatic chicken door EasyProtect can be operated either with 230 Volt mains power or with 4 x AA Mignon batteries. What safety features does the automatic chicken door EasyProtect provide? The door has a timed delay of the light signal to prevent unwanted opening, stops when resistance is encountered during closing, and has an integrated self-locking mechanism to prevent opening from the outside.

SmartCoop Chicken Coop Flap with Wifi - Set With the SmartCoop Chicken Coop Door WLAN Set, you revolutionize your chicken coop management. Through the practical modules of the SmartCoop series, you get a comfort automation for your chicken coop. With this set, you can control the day-night rhythm of your chickens and regulate the free-running times of your poultry automatically and if necessary manually from anywhere. Thanks to the WLAN and app control, you always have control in your hand. The modular structure of the SmartCopp System offers full flexibility to perfectly adapt the system to different conditions. This allows SmartCoop to be integrated into both very small coops and larger fixed or mobile coops. All available modules can be installed and operated individually or together, depending on which functions you want to use. One of the most important advantages of this set is the included connectivity module with WLAN function, which allows you to conveniently control the chicken door and all SmartCoop modules from anywhere. Via a user-friendly app on your smartphone, you can make adjustments to changed requirements and thus offers a comfortable management option. This set is a solution that includes the SmartCoop Chicken Coop Door, the Connectivity Module for WLAN Connection, the SmartCoop Controller with 230V Power Supply, and the SmartCoop LED Chicken Coop Lighting. The individual components of the set are housed in a shock and dustproof plastic housing, which ensures a long lifespan and high reliability. Despite its robustness, we recommend installing it in a place in your chicken coop that is protected from weather influences (UV radiation, humidity). Overview: Convenient control via app thanks to WLAN Connectivity Module Flexibly configurable control with 12 slots in the housing Daylight-dependent control through integrated light sensor LED status indicator for quick system overview Shockproof, dustproof plastic housing for long lifespan Easy installation in small, large, fixed, and mobile coops Technical Data: Connection cable length: 30 cm Protection class: IP 32 Supply voltage: 5.0 V DC Power consumption: 0.2 W Transmission frequency: 2.4 GHz Transmission power: 20 dBm Delivery Contents: 1x SmartCoop Controller with 230 V Power Supply1x Smartcoop Connectivity Module for WLAN Connection1x SmartCoop Chicken Door1x SmartCoop LED Chicken Coop Lighting FAQ How convenient is the remote control with the connectivity module included in the set? With the connectivity module included in the set, you can control and adjust all functions of the SmartCoop system. You can do this conveniently from anywhere - all you need is an internet connection. How can I install the SmartCoop Chicken Coop Door with WLAN Set? The installation of the set is very simple and does not require any special technical knowledge. A detailed installation manual is included in the delivery and guides you step by step through the process. Is the SmartCoop chicken coop door with WLAN suitable for all chicken coops? Yes, the SmartCoop chicken coop door with WLAN from the set can be used universally and can be used with all chicken coops.

Replacement light sensor for the automatic chicken door. With the automatic chicken door, the flaps, doors or sliders on poultry houses can be automatically opened and closed. The automatic chicken door has several functions for opening / closing the slider: Daylight-dependent control with light sensor time-dependent control, it can be differentiated between weekdays and weekends Manual control, on the device or via a connected button Both battery and mains operation is possible

Connector Cable for Car / Electric Fence Battery compatible with all battery devices from Kerbl, AKO, Corral and standard car batteries with 2 A-fuses for overvoltage protection battery capacity of 1 Ah = 1,000 mAh represents a running time of about 1 year (without taking into account the typical self-discharge effects of battery storage) barrel connector 5.5 x 2.1 mm Technical data Voltage: 12 V DCFuse: 2 ACable length: 3 mWeight: 180 g

Power Adapter for Automatic Chicken Door With the automatic chicken door, the flaps, doors or sliders on poultry houses can be automatically opened and closed. Both battery and mains operation is possible. The automatic chicken door has several functions for opening / closing the slider:Daylight-dependent control with light sensortime-dependent control, it can be differentiated between weekdays and weekendsmanual control, on the device or via a connected button

Replacement String with Bead for Automatic Chicken Door

suitable for the Kerbl chicken flap Basic