Technovit-2-Bond PU Hoof Adhesive Cartridge, 190 ml, incl. Gloves

Technovit-2-Bond PU Hoof Adhesive Cartridge – Fast relief for healthy hooves

With the Technovit-2-Bond PU Hoof Adhesive Cartridge, you get a highly effective 2-component PU adhesive that makes your daily hoof care routine noticeably easier. The system stands out thanks to its innovative speed, as the glue dries within just 30 seconds. This way, you can support your cattle's healing process specifically, without losing valuable time during long waiting periods.

Efficiency is the top priority here, as the treated hoof is fully load-bearing again after about 3 minutes, provided the material has been stored at over 15 °C. Since no manual mixing is necessary for the application, you avoid unnecessary waste and benefit from clean, uncomplicated handling that is perfectly tailored to the needs of modern dairy farming.

Thanks to the clever cartridge, you can achieve a precise application at both 45° and 90° angles completely effortlessly. The slightly pasty viscosity of the material ensures that the adhesive flows in a controlled manner, guaranteeing a strong bond on both wood and rubber blocks, which provides lasting, stable results during hoof treatment.

Overview

• Dries within just 30 seconds
• Fully load-bearing after approx. 3 minutes (when stored > 15 °C)
• No mixing required, ready for immediate use
• Precise application possible at 45° and 90° angles
• Strong and permanent adhesion to wood and rubber blocks
• Slightly pasty viscosity for clean work without running
• Suitable for dairy cattle and beef cattle

Technical data

• Material: 2-component polyurethane adhesive (PU)
• Drying time: 30 seconds
• Load capacity: after approx. 3 minutes
• Recommended storage temperature: above 15 °C

Scope of delivery

1x Technovit-2-Bond PU Hoof Adhesive Cartridge

Questions & Answers

How fast does the Technovit-2-Bond PU Hoof Adhesive Cartridge dry?
The adhesive already sets within just 30 seconds.

When can the treated cow put full weight on the hoof again?
With correct storage of the adhesive above 15 °C, the hoof is fully load-bearing again after about 3 minutes.

Do I have to mix the adhesive myself before use?
No, mixing is not necessary. The system allows for direct application without preparation, thus avoiding waste.

Can the adhesive be applied at different angles?
Yes, the Technovit cartridge allows for precise application at both 45° and 90° angles.