Diamond Blade Clipper Blade for Wahl Clippers Wahl cutting set with high-tech surface refinement for hair-sharp cutting performance with a long service life. The Original Wahl Shaving head Diamond Blade impresses with a longer service life, higher degree of hardness and a shearing comb surface with less wear thanks to innovative Diamond-like-carbon-coating with diamond-like properties. The integrated cutting length adjustment allows a step adjustment of the cutting set from 0,7 to 3 mm. Due to the grooved profile, the clipper blade glides effortlessly through the coat without any problems and ensures a consistent cutting pattern. Less maintenance required and 40 times more durable compared to conventional cutting sets. Care instructions: To ensure the optimum life of the shaving head, regular and correct care is important. Clean the cutting plates with a soft cloth or brush. Make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper head with special clipper oil. The shearing blades must be oiled before each use with the shearing head mounted. During work, oil every 5-10 minutes. After oiling, let the machine idle for a few seconds so that the oil can spread well and is not transferred to the animal's hair. With proper maintenance and care, the durability of the shearing heads can be increased by up to 20%. Regrinding can also be delayed. Overview: High-tech surface finish with a high degree of hardness 40x more resistant compared to conventional shaving heads Precise cutting pattern Long service life Integrated cutting length adjustment 0,7 - 3 mm Low maintenance stainless steel cutting set Cutting comb width: 46 mm Suitable for these Clippers: Moser Rex Moser 1400 Moser Arco Moser Arco Pro Moser ChromStyle Moser LiPro Ermila Motion Wahl Bravura Wahl Adelar Wahl Adelar Pro Wahl Adore Wahl Beretto Wahl Creativa Wahl Super Groom Technical data: Cutting system: Interchangeable cutting set Cutting comb width: 46 mm Cutting length: 0,7 / 1,4 / 1,8 / 2,5 / 3 mm Number of teeth: 26 Material: Stainless steel Scope of delivery: 1x Wahl Diamond Blade Clipper Blade 1854-7172

Wahl Stainless steel push-on comb for all common choice and Wahl machines The WAHL push-on combs made of stainless steel glide efficiently and quickly through the coat and are particularly robust + durable. The slim stainless steel teeth of the stainless steel combs glide effortlessly through the already cut coat, compared to the conventional plastic combs, and thus ensure an even shearing result. The Wahl push-on combs are best combined with 1.5 mm shearing heads to achieve a optimal shearing result to achieve. Simply attach the push-on comb in the desired length to the shaving head Tight fit without slipping. A special colour system facilitates the quick selection of the right comb. In order to achieve the desired hair length, the hair should always be sheared to grow will be. At a glance: Slide-on combs with stainless steel teeth good gliding characteristics Colour coding for easy orientation extremely durable smooth finish a tight fit on the shaving head For shear heads with a width of 46mm for Wahl Rex, Fox, Arco, Arco Pro and Wahl 1400 The Wahl slip-on combs are available in the following lengths: 3mm 6 mm 10 mm 13 mm 16 mm 19 mm 22 mm 25 mm The Wahl push-on combs are suitable for: Wahl rex Adj. Wahl rex Wahl FOX Wahl 1400 Wahl ARCO WAHL Adelar WAHL Adelar Pro Complete list of compatible devices from WAHL / Wahl: Type 1170, 1230, 1233, 1234, 1400, 1853, 1854, 1855, 1870, 1871, 1872, 1873, 1881, 1884, 1885, 1853, Titanium, Arco, Bellissima, Bravura, Chromado, ChromStyle, EasyStyle, Genio Plus, Li+Pro, Motion, Network, Power+, Primate, Primate 2in1, Primate Adjustable, FlexiCut, Rex, Rex Adjustable, Super Cordless, Super Cut, Super Groom

Diamond Blade Clipper Blade for WAHL Clipper WAHL cutting head with high-tech surface refinement for a hair-sharp cutting performance with a long service life. The Original WAHL Diamond Blade Shaving head convinces with a longer service life, higher degree of hardness and a more wear-resistant clipper comb surface thanks to the innovative Diamond-Like-Carbon coating with diamond-like properties. The integrated cutting length adjustment allows a step adjustment of the cutting set from 0,7 to 3 mm. Due to the grooved profile, the clipper blade glides effortlessly through the coat and ensures a consistent cutting pattern. Less maintenance required and 40 times more resistant compared to conventional cutting sets. Care instructions: To ensure the optimum life of the shaving head, regular and correct care is important. Clean the cutting plates with a soft cloth or brush. Make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper head with special clipper oil. The shearing blades must be oiled before each use with the shearing head mounted. During work, oil every 5-10 minutes. After oiling, let the machine idle for a few seconds so that the oil can spread well and is not transferred to the animal's hair. With proper maintenance and care, the durability of the shearing heads can be increased by up to 20%. Regrinding can also be delayed. Overview: High-tech surface finish with high degree of hardness 40x more resistant compared to conventional shaving heads Precise cutting pattern Long life Integrated cutting length adjustment 0,7 - 3 mm Low maintenance stainless steel cutting set Cutting comb width: 46 mm Suitable for these clippers: WAHL Rex WAHL 1400 WAHL Arco WAHL Arco Pro WAHL ChromStyle WAHL LiPro Ermila Motion Wahl Bravura Wahl Adelar Wahl Adelar Pro Wahl Adore Wahl Beretto Wahl Creativa Wahl Super Groom Technical data: Cutting system: Interchangeable cutting set Cutting comb width: 46 mm Cutting length: 0,7 / 1,4 / 1,8 / 2,5 / 3 mm Number of teeth: 26 Material: Stainless steel Scope of delivery: 1x WAHL Diamond Blade Clipper Blade 1854-7023

Clipper Blade WAHL Max 45 / WAHL Max 50 Precision ground cutting set from WAHL - High quality workmanship 100% made in Germany. The original WAHL Snap-On Clipper head from WAHL is a precision ground full metal cutting set. The cutting set is "Made in Germany" and suitable for professional use as well as for the home user. The shearing head is made of high quality stainless steel by cross grinding and not punched. This manufacturing method gives the shearing head an extremely long service life. The grooved profile on the back ensures optimal cooling of the cutting set. The special shaving head geometry and the optimally adjusted cutting pressure ensure an exact cut. Thanks to the high quality of workmanship, the cutting set can be reground several times. The WAHL replacement shear blades are compatible with all current brand-name devices that use a Snap On cutting set. The SnapON change system makes it easy to slide the shearing head on and off in seconds, without the use of tools. Care Tip: To ensure optimal life of the shaving head, regular and proper care is important. Clean the cutting plates with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil can be well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the shaving heads can be increased up to 20%. Also the regrinding can be delayed. Overview: For all shearing machines with SnapOn High processing quality Made of high quality stainless steel Very long cutting ability Multiple regrindable All parts are cross and profile ground Made in Germany Suitable among others for the following shearing machines: WAHL Max 45 WAHL Max 50 Oster Golden A5 Oster A6 Comfort Oster A6 Slim Oster Pro 3000i Oster PowerPro Ultra Oster Power Max Aesculap Durati Aesculap FAV5 Aesculap FAV5 CL Aesculap FAV5 Hybrid Aesculap Fortis Wahl Avalon Wahl KM2 Wahl KM5 Wahl KM10 Wahl KM Cordless Wahl KM Cordless Horse Kerbl Clipper PROFI More shearing machines with SnapOn Clipper Blades Cutting length: 1/10 mm, #40F for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, heavily tangled, matted, knotted 1/20 mm, #50F for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, strongly tangled, matted, knotted 1 mm, #30F (fine teeth) for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, strongly tangled, matted, knotted 2 mm, #10F (fine teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier, Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle / coat type: short, bristly, long, fine, with or without undercoat, strongly tangled 2,3 mm, #10W (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 3 mm, #8,5F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier, Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle / coat type: short, bristly, long, fine, with or without undercoat, strongly tangled 5 mm, #7F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 7 mm, #5F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 9 mm, #4F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat

Wahl Clipper Blade coarse KM1854-7351 for Arco, Adelar, Adore and more With the Wahl Clipper Blade "Made in Germany", professional shaving work can be easily implemented. The Wahl Clipper Blade coarse KM1854-7351 is made in Germany and perfectly suitable for the Moser Arco, Bravura, Wahl Adelar, Adore and many other clippers. The integrated cutting length adjustment allows a step adjustment of the cutting set from 0,7 to 3 mm. The original cutting set is precision-ground and made of high-quality stainless steel. This manufacturing method gives the shaving head an extremely long service life. The grooved profile on the back ensures optimal cooling of the cutting set. Thus, the cutting set glides easily through the coat and ensures a precise cut. Thanks to the high quality of workmanship, the clipper blade can be resharpened several times. Care instructions: To ensure the optimum life of the clipper head, regular and correct care is important. Clean the cutting plates with a soft cloth or brush. Make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades must be oiled before each use with the shearing head mounted. Oil every 5-10 minutes while working. After oiling, let the machine idle for a few seconds so that the oil can spread well and is not transferred to the animal's hair. With proper maintenance and care, the durability of the shaving heads can be increased by up to 20%. Regrinding can also be delayed. Overview: Specially designed for detail shearing and veterinary use High quality workmanship Made of high quality stainless steel Precision ground Extremely long life Multiple regrindable Cutting length 3-way adjustable from 0,7 - 3 mm Cutting width approx. 46 mm Suitable for the following clippers, among others: Moser Arco Moser Bravura Moser Chromstyle Wahl Adelar Wahl Adore Wahl Super Groom Ermila Bellina Genic Plus and many more Scope of delivery: 1x Wahl Clipper Blade coarse KM1854-7351

Wahl Motiva Dog Clipper Battery The cordless dog clipper for partial clipping with lithium power. With the compact Motiva Dog Clipper from Wahl, clipping the undersides of paws, head, face or genital areas is simply easier. The low-vibration and powerful DC motor cuts the coat precisely and cleanly at 5.300 rpm. The clipper has an excellent noise reduction and automatic speed control for constant performance regardless of charge level or coat condition. The dog trimmer is equipped with a powerful Li-Ion battery for up to 120 min shearing time. The Wahl Motiva charges fully within 80 minutes and can also be put into mains operation in a flash with the charging cable in the meantime. Thanks to an intelligent battery status display you can keep an eye on the charge status of the battery. The low weight of the clipper of only 275 g and the ergonomic design guarantee joint-friendly, low-fatigue work. The full metal cutting set is diamond ground and has an integrated cutting length adjustment from 0,7 to 3 mm. Depending on the desired cutting length, you can also work with one of the push-on combs. Easy cleaning is ensured by the Quick-change cutting set system and the practical Easy-Clean function. Overview: For small areas such as back, head and face Low vibration dc motor Excellent noise reduction Automatic speed control Intelligent LED battery status and charge control display Battery and mains operation possible Diamond-ground full metal cutting set with fine teeth 0,7 - 3 mm Cutting set quick-change system Easy-Clean function for convenient cleaning Low weight, only 275 g Ergonomic and easy on the joints Made in Germany Technical data: Operating mode: rechargeable battery / Main Drive: DC motor Voltage: 100 - 240 V Cutting comb width: 46 mm Cutting length: 0,7 / 1,3 / 1,9 / 2,4 / 3 mm Battery technology: Li-Ion Battery life: max. 120 min. Battery charging time: 80 min. Sound pressure level: max. 63 dB (A) Cutting speed: 5300 strokes/min Dimensions (LxWxH): approx. 17,8 x 4,8 x 5,1 cm Weight: approx. 275 g with cutting set Cutting set width: 46 mm Cutting length: 0,7 / 1,4 / 1,8 / 2,5 / 3 mm Scope of delivery: 1x Wahl Motiva Dog Clipper Battery 1x 5in1 Magic Cutting set 1x Stainless steel push-on comb 6 mm 1x Stainless steel push-on comb 13 mm 1x Charging stand 1x Charging cable 1x Cleaning brush 1x Cardboard box

WAHL stainless steel attachment comb set - 6 mm, 10 mm, 13 mm The original WAHL attachment combs made of stainless steel are particularly robust and durable and suitable for WAHL Max 45 WAHL Max 50 All snap-on shaving heads from Aesculap, Heiniger, Oster, Kerbl, etc. Fits #8.5, #9, #10, #15, #30 shaving heads from other brands Will not work with other brand #40 & #50 shaving heads Scope of delivery: 1x WAHL attachment comb stainless steel 6 mm 1x WAHL attachment comb stainless steel 10 mm 1x WAHL attachment comb stainless steel 13 mm Note: For the best clipping performance with the attachment combs, we recommend a fine blade set with a length of 1 mm. This is included as standard with many clippers (such as WAHL Max45 and WAHL Max50). A longer blade set of 3 mm or more is less suitable, as the fur may get caught.

WAHL Choice attachment comb stainless steel The WAHL stainless steel attachment combs glide efficiently and quickly through the coat and are particularly robust + durable. The slender stainless steel teeth of the stainless steel combs glide effortlessly through the already cut coat, compared to the conventional plastic combs, thus ensuring uniform shear result. To achieve an optimum shearing result, it is best to use the attachment combscombine with fine 1 mm shearing heads. Simply attach the attachment comb to the shaving head in the desired length Firm seat without slipping. A special colour system makes it easy to quickly select the right comb. To achieve the desired hair length, the hair should always be shorn with the combs in the direction of growth. At a glance: Attachment combs with stainless steel teeth good gliding characteristics Colour coding for easy orientation extremely durable smooth finish a tight fit on the shaving head The WAHL Stainless steel attachment combs are particularly robust and durable. The attachment combs are suitable for the following shearing machines: WAHL Max 45 WAHL Max 50 EASTER Golden A5 EASTER A6 EASTER PRO3000i GT105 Aesculap fav5 GT306 Aesculap Fav5 CL GT308 Aesculap fav5 Hybrid Kerbl Shearing machine PROFI All other shearing operations with SnapOn shearing head Note: For working with a attachment comb, we recommend a 1 mm cutting set with fine teeth. This is already included in the scope of delivery of the shearing machines Max 45 and Max 50 from 2018. Available in the following sizes: 3mm 6 mm 10 mm 13 mm 16 mm 19 mm 22 mm 25 mm

Wahl Adelar Pro Horse Clipper WAHL Adelar PRO: the powerful horse clipper for professional partial clipping. The right push-on comb for every type and length of coat. The professional battery-operated clipper Wahl Adelar Pro impresses with its power, functionality, ergonomics, smooth running and light weight. Thanks to the quick charge function, the lithium-ion battery is fully charged within approx. 50 minutes and the clipper can shear for up to 120 minutes without interruption. The Wahl Adelar Pro not only shears excellently, but with its 272 grams it is also extremely light, making it easy on the joints. The powerful motor with 5300 revolutions per minute gives the Wahl Adelar Pro excellent shearing power. The automatic speed control ensures consistent shearing performance with every coat. Another special feature of the clipper is its particularly quiet running. This contributes to the fact that you can usually use the Wahl Adelar Pro with young or nervous horses without any problems. The mounted cutting set with integrated cutting length Adjustment from 0,7 to 3 mm rounds off the Wahl Adelar Pro perfectly. This diamond-ground stainless steel shearing head is sharp and has a precise cutting pattern. Overview: Ideal for cordless partial horse clipping Also suitable for young and nervous animals Powerful & especially quiet 5300 rpm with automatic speed control Ergonomic design & super-lightweight Non-stop cordless shearing thanks to 2 Li-Ion batteries Shears up to 120 minutes per battery without interruption Quick charge of 60 minutes Practical LED charging indicator Precision-ground stainless steel blade set with integrated cutting length adjustment (0,7 - 3 mm) Quick-change blade set system for easy replacement Premium clipper "Made in USA" Technical data: Mode of operation: Rechargeable battery Drive: DC motor with noise reduction Voltage: 100 - 240 V Battery technology: Li-Ion Number of batteries: 2 Battery voltage: 50 - 60 Hz Cutting speed: 5300 Strokes/min Sound pressure level: max. 60 dB (A) Battery life: max. 120 min. Battery charging time: 75 min. / 50 min. Quick charge Dimensions: approx. 17,8 x 4,7 x 5,7 cm Weight: approx. 272 g Colour: black Cutting system: Stainless steel cutting set Cutting set width: 46 mm Cutting length: 0,7 - 3 mm Scope of delivery: 1x Wahl clipper Adelar Pro 2x XL exchangeable batteries 1x Battery charger 1x Cutting set 0,7 - 3 mm 1x Blue storage bag 1x Cleaning brush 1x Cutting set oil

WAHL Slide-on Attachment Comb Set Stainless Steel for Rex, 1400, Arco, Adelar Consisting of stainless steel Slide-on attachments in the following lengths: 3 mm 6 mm 10 mm Suitable for: WAHL clipper REX WAHL clipper 1400 WAHL clipper ARCO WAHL Adelar WAHL Adelar Pro Complete list of compatible devices from WAHL / WAHL: Type 1170, 1230, 1233, 1234, 1400, 1853, 1854, 1855, 1870, 1871, 1872, 1873, 1881, 1884, 1885, 1853, Titan, Arco, Bellissima, Bravura, Chromado, ChromStyle, EasyStyle, Genio Plus, Li+Pro, Motion, Network, Power+, Primat, Primat 2in1, Primat Adjustable, FlexiCut, Rex, Rex Adjustable, Super Cordless, Super Cut, Super Groom