Chicken Flap Solar

Automatic Chicken Door Solar WILMA - Electric Chicken Flap for Chicken Coop The electric chicken door opens and closes chicken flaps, doors or sliders on chicken coops automatically by dusk, time or manual. With the automatic chicken flap, you no longer have to be at the chicken house on time every evening and every morning to open the chicken door. The electric chicken flap from Agrarzone opens and closes your chicken door on poultry and chicken houses fully automatically. The chicken flap WILMA has several functions for opening or closing the flap. The poultry flap opens the vertical slider to your poultry or chicken house with light sensor when it gets light and closes the door again as soon as it gets dark. The control of the chicken door can also be done with timer function. It is also possible to combine the light sensor and timer modes. The operation of the opening and closing function can also be operated directly on the unit. Due to the solar module, the automatic chicken flap WILMA is designed for energy-autonomous continuous use. The housing of the self-opening chicken door is extremely sturdy and protects the fine electronics from moisture, dirt and sunlight. Placed in a slightly protected position, the electronic slider lasts an extremely long time due to its very durable components. Functions of the chicken door: Light sensor: This mode is used to automatically open the coop door at dawn and close it at dusk. Timer: The timer function is used to open the coop door automatically in the morning at the time you have set. In the evening, you can set the time when the chicken flap should close automatically. Light sensor & Timer: A mix of the light sensor and timer modes is possible. If you select this, the previously set light level is used for closing. If it is not dark enough to trigger the light sensor, the set time is used for closing. Manual: The opening and closing mechanism can be operated directly on the appliance. Overview: Fully automated chicken door for the chicken coop Solar operation for energy-autonomous use Daylight-dependent control with light sensor Time-dependent control with time switch Combination of sensor and timer modes possible Manual control on the unit Agrarzone Premium quality Technical data: Power supply: 240 V / 4 x AA batteries Supply voltage: 4,5 - 7,4 V Housing material: ASA Supply current: 0,15 mA Power of solar panel: 2 Watt Weight: approx. 0,5 kg Nominal weight of door: less than 1,5 kg Dimensions control unit (LxWxH): 28,5 x 9,5 x 6,9 cm Solar module dimensions (LxWxH): 18,5 x 13,5 x 7 cm Models: Electric Chicken Door Solar without slider Electric Chicken Door Solar with slider 22 x 33 cm (for normal chickens) Electric Chicken Door Solar with slider 30 x 40 cm (for normal and larger chickens) Scope of delivery: Electric control with integrated motor and cable pull Slider (depending on selected model) Solar panel 2 Watt Operating instructions

Agrarzone Automatic Chicken Door Solar With the automatic chicken door, chicken flaps, doors or sliders on poultry houses can be opened and closed automatically depending on the time of day or brightness. The electronic slider opens and closes your chicken door as needed. The chicken flap opens the vertical gate to your poultry or chicken coop when it gets light and closes it again when it gets dark. In addition, manual operation of the device is also possible. This can be done directly on the device or via manual button. The sensitivity of the integrated twilight switch is easily adjustable, so that unintentional opening is prevented in the event of thunderstorm flashes or near-matched luminaires or hall floodlights. If an animal is under the pusher during the closing process of the automatic chicken flap, the engine of the chicken door gatekeeper will automatically stop when placed and will continue closing when the animal has cleared. The function of the Agrarzone Chicken Flap: The integrated motor of the automatic chicken door is controlled by a twilight switch and thus the opening or closing of a vertical slide is realized by means of a cable pull. In addition, manual operation is possible. The housing of the automatic chicken door is extremely stable and protects the fine electronics from moisture, dirt and sunlight. Slightly protected, the electronic slider, thanks to its extremely durable components, lasts a very long time. The automatic chicken flap has several functions for opening / closing the flap: Light sensor: The chicken flap is controlled by daylight with light sensor Timer: Control of the chicken door is time-dependent. You can differentiate between weekdays and weekends Manual control: directly on the device or via a connected push-button Overview: Automatic Chicken Flap Mains operation and battery operation possible Daylight-dependent control with light sensor Time-dependent control Manual control, on the device or via connected push-button Solar panel with battery: Just 7 sunny days per year are sufficient for safe continuous operation Mounting kit for variable attachment of the solar module included A total of 5 m of cable for flexible installation An LED indicates when there is sufficient sunlight for the charging process Suitable for outdoor use Delivery: Control with integrated motor and cable Power adapter 230V Batteries (4 x AA, already in the device) light sensor Pulley set (4 pieces) Operation manual Assembly of the chicken flap: The assembly of the electronic chicken door is very simple: first you assemble the slide, pull it into the open position, mount the chicken flap device so that you can connect it through the loop with the slider (rolled cord = delivery state!). Then insert the batteries - done. Plan the mounting situation and above all the line guidance from the chicken door to the device. Measure the opening of the chicken flap and provide a suitable sliding door with guide rails. Suitable slides and additional pulleys can be found as accessories in our shop. If you want to supply the automatic chicken door with mains voltage, make sure that a 230 Volt outlet is available nearby. The power supply and the mounting location of the device must be protected against rainfall. The automatic chicken flap is not compatible with valves or flaps that have a self-locking feature. Technical specifications: Min. Gate weight: 0.5 kg Max. Gate weight: 2.5 kg Max. Lifting height: 60 cm Power supply: 230 Volt mains operation (power supply for 12 Volt operation) or battery operation (4 x AA) Models: Automatic chicken door solar without slider Automatic chicken door solar with slider 22 x 33 cm Automatic chicken door solar with slider 30 x 40 cm Automatic chicken door solar with slider 43 x 40 cm

Kerbl Automatic Chicken Door - never change batteries again With the Kerbl Automatic Chicken Door, sliders on poultry and chicken houses can be automatically opened and closed depending on the time of day or brightness. The electronic slider opens and closes your chicken door as needed. The chicken flap opens the vertical gate to your poultry or chicken coop when it gets light and closes it again when it gets dark. In addition, manual operation of the device is also possible. This can be done directly on the device or via manual button. The sensitivity of the integrated twilight switch is easily adjustable, so that unintentional opening is prevented in the event of thunderstorm flashes or near-matched luminaires or hall floodlights. If an animal is under the pusher during the closing process of the automatic chicken flap, the engine of the chicken door gatekeeper will automatically stop when placed and will continue closing when the animal has cleared. The function of the Kerbl Chicken Door: The integrated motor of the automatic chicken door is controlled by a twilight switch and thus the opening or closing of a vertical slide is realized by means of a cable pull. In addition, manual operation is possible. The housing of the automatic chicken door is extremely stable and protects the fine electronics from moisture, dirt and sunlight. Slightly protected, the electronic slider, thanks to its extremely durable components, lasts a very long time. The automatic chicken flap has several functions for opening / closing the flap: Light sensor: The chicken flap is controlled by daylight with light sensor Timer: Control of the chicken door is time-dependent. You can differentiate between weekdays and weekends Manual control: directly on the device or via a connected push-button Overview: Automatic Chicken Flap Mains operation and battery operation possible Daylight-dependent control with light sensor Time-dependent control Manual control, on the device or via connected push-button Delivery: Chicken Door controler with integrated motor and cable Power solar module 10 W with 2.200 mAh capacity Power adapter 230V Batteries (4x AA, already in the device) light sensor Pulley set (4 pieces) operation manual Assembly of the chicken door: The assembly of the electronic chicken door is very simple: first you assemble the slide, pull it into the open position, mount the chicken flap device so that you can connect it through the loop with the slider (rolled cord = delivery state!). Then insert the batteries - done. Plan the mounting situation and above all the line guidance from the chicken door to the device. Measure the opening of the chicken flap and provide a suitable sliding door with guide rails. Suitable slides and additional pulleys can be found as accessories in our shop. If you want to supply the automatic chicken door with mains voltage, make sure that a 230 Volt outlet is available nearby. The power supply and the mounting location of the device must be protected against rainfall. The automatic chicken flap is not compatible with valves or flaps that have a self-locking feature. Technical specifications: Min. Gate weight: 0.5 kg Max. Gate weight: 2.5 kg Max. Lifting height: 60 cm Power supply: 230 Volt mains operation (power supply for 12 Volt operation) or battery operation (4 x AA)