Metalworking: Buy tools & more online

Elmag Automatic Welding Shield PREMIUM-TC The new MultiSafeVario® welding shield offers welding protection at the highest level. With TRUE COLOR visor for excellent color perception during welding. The new MultiSafeVario® welding helmet "PREMIUM-TC" can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG shielded ARC welding, plasma cutting, microplasma welding, gas welding and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. Due to the adjustable headband with snap-in mechanism the shield can be comfortably adjusted to the head size. It offers thanks to UpandDown mechanism a center of gravity optimization when opening and closing the visor. A weight of only 460 grams ensures optimum wearing comfort during welding. The brightness level of the extra large field of view (100 x 65 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated. When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam. The welding shield has 2 adjustable protection level ranges (degree of darkening for optimum visibility, depending on the welding process or arc strength). These are adjustable together with the response (sensitivity) of the field of vision at any time continuously adjustable at any time by means of controls on the inside of the helmet - one hand remains free for the welding torch. Areas of application: Already from 3 amps MMA/E-HAND/SMAW MIG/MAG/GMAW FILLER WIRE TIG/TIG/GTAW PLASMA CUTTING MICRO PLASMA WELDING GAS WELDING GRINDING Overview: TRUE COLOR glare protection cassette for true color perception during welding Extra large field of view (WxH) 100 x 65 mm Best rating for classification 1/1/1/1 Low switching time of only 0,033 ms Two continuously adjustable protection level ranges, internally adjustable from 4-8 or 9-13 Internal, adjustable delay/brightening delay Internal adjustable sensitivity for optimal response, even in the low amp range Replaceable back-up battery (1 PC. CR 2450) Test button to check function Suitable for overhead and forced position welding Optionally available dioptric disc inserts Low weight of only 460 g for optimal wearing comfort Welding and grinding mode Aperture with up-and-down mechanism Quick 9-step angle adjustment of the helmet Soft, replaceable sweatbands at the front, top and back Continuous adjustment of the headband width Distance between helmet and face adjustable in 3 steps Both hands free for set-up and welding work High welding quality due to continuous observation Certified according to EN 379/175/166 and PPE (EU) 2016/425 Technical data: Automatic fast forward and reverse: NO Anti-glare filter: TRUE COLOR Field of view size (WxH): 100 x 65 mm Classification according to en 379: 1/1/1 Light sensors: 4 Solar technology: Yes Fully automatic: No Mode switch welding/grinding: No Power supply: Solar cells Back-up battery: Yes Test switch: No Grinding mode: Yes Fill-in delay short/medium/long: No Battery level indicator: Yes Protection level adjustment DIN EN 4/9-13: Stepless Protection level setting sensitivity: Stepless Protection level darkened max.: DIN 8 or 13 Switch-on time at 22 °C: 0,000033 s Brightening time short/medium/long: 0,3 ~ 0,9 s Protection level bright: DIN 4 Protection level darkened min: DIN 4 or 9 Ultraviolet protection UV permanent: DIN 16 Infrared protection IR permanent: DIN 16 Helmet material polyamide/nylon: No Operating temperature: -5 to +55 °C Storage temperature: -20 to +70 °C Cassette size (WxHxS): 156 x 158 x 9 mm Weight: 0,46 kg Scope of delivery: 1x Elmag Automatic Welding Shield PREMIUM-TC 3x Faceplate outside 1x Faceplate inside 1x Color cardboard packaging

Elmag Automatic Welding Shield EAGLE The stylish MultiSafeVario® welding helmet offers welding protection at the highest level. The best-selling model from ELMAG has already proven itself thousands of times! The MultiSafeVario® Welding helmet "EAGLE" can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG inert gas welding, plasma cutting and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. Due to the adjustable headband with snap-in mechanism the shield can be comfortably adjusted to the head size. It offers thanks to UpandDown mechanism a center of gravity optimization when opening and closing the visor. The brightness level of the large field of view (98 x 55 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated. When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam. The protection level (degree of darkening for optimum vision, depending on the welding process or arc intensity) and the response (sensitivity) of the field of vision can be continuously adjustable at any time by means of controls on the outside of the helmet - one hand remains free for the welding torch. Field of application: Already from 5 amps MMA/E-HAND/SMAW MIG/MAG/GMAW FILLER WIRE TIG/TIG/GTAW PLASMA CUTTING GRINDING Overview: Best-selling model from elmag, proven a thousand times over GREEN COLOR glare protection cassette Large field of view (WxH) 98 x 55 mm Stylish helmet design Low switching time of only 0,05 ms External, adjustable delay/brightening delay External, adjustable sensitivity for optimal response Replaceable back-up batteries (2 PCS. CR 2450) Test button to check function Suitable for overhead and forced position welding Welding and grinding mode Optionally available dioptric disc inserts Aperture with up-and-down mechanism Comfortable, adjustable headband with snap-in mechanism Headband and brow welding band interchangeable Visor angle and wearing height adjustable Both hands free for set-up and welding work High welding quality due to continuous observation Certified according to EN 379/175/166 and PPE (EU) 2016/425 Technical data: Automatic fast forward and reverse: No Anti-glare filter: GREEN COLOR Field of view size (WxH): 98 x 55 mm Classification according to EN 379: 1/1/1/2 Light sensors: 4 Fully automatic: Yes Solar technology: Yes Mode switch welding/grinding: Yes Power supply: Solar cells Back-up battery: Yes Test switch: Yes Grinding mode: No Fill-in delay short/medium/long: Yes Battery level indicator: No Protection level setting DIN EN 4/9-13: Stepless Protection level setting sensitivity: Stepless Switch-on time at 22 °C: 0,00005 s Protection level darkened max.: DIN 13 Brightening time short/medium/long: 0,3 ~ 0,9 s Protection level bright: DIN 4 Protection level darkened min.: DIN 9 Ultraviolet protection UV permanent: DIN 16 Infrared protection IR permanent: DIN 16 Helmet material polyamide/nylon: Yes Operating temperature: -5 to +55 °C Storage temperature: -20 to +70 °C Cassette size (WxHxS): 115 x 125 x 18 mm Weight: 0,47 kg Scope of delivery: 1x Elmag Automatic Welding Shield EAGLE 3x Faceplate outside 1x Faceplate inside 1x Color cardboard packaging

Elmag Automatic Welding Shield FLAME The stylish MultiSafeVario® welding helmet offers welding protection at the highest level. The best-selling model from ELMAG has already proven itself thousands of times! The MultiSafeVario® Welding helmet "FLAME" can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG inert gas welding, plasma cutting and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. Due to the adjustable headband with snap-in mechanism the shield can be comfortably adjusted to the head size. It offers thanks to UpandDown mechanism a center of gravity optimization when opening and closing the visor. The brightness level of the large field of view (98 x 55 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated. When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam. The protection level (degree of darkening for optimum vision, depending on the welding process or arc intensity) and the response (sensitivity) of the field of vision can be continuously adjustable at any time by means of controls on the outside of the helmet - one hand remains free for the welding torch. Field of application: Already from 5 amps MMA/E-HAND/SMAW MIG/MAG/GMAW FILLER WIRE TIG/TIG/GTAW PLASMA CUTTING GRINDING Overview: Best-selling model from elmag, proven a thousand times over GREEN COLOR glare protection cassette Large field of view (WxH) 98 x 55 mm Stylish helmet design Low switching time of only 0,05 ms External, adjustable delay/brightening delay External, adjustable sensitivity for optimal response Replaceable back-up batteries (2 PCS. CR 2450) Test button to check function Suitable for overhead and forced position welding Welding and grinding mode Optionally available dioptric disc inserts Aperture with up-and-down mechanism Comfortable, adjustable headband with snap-in mechanism Headband and brow welding band interchangeable Visor angle and wearing height adjustable Both hands free for set-up and welding work High welding quality due to continuous observation Certified according to EN 379/175/166 and PPE (EU) 2016/425 Technical data: Automatic fast forward and reverse: No Anti-glare filter: GREEN COLOR Field of view size (WxH): 98 x 55 mm Classification according to EN 379: 1/1/1/2 Light sensors: 4 Fully automatic: Yes Solar technology: Yes Mode switch welding/grinding: Yes Power supply: Solar cells Back-up battery: Yes Test switch: Yes Grinding mode: No Fill-in delay short/medium/long: Yes Battery level indicator: No Protection level setting DIN EN 4/9-13: Stepless Protection level setting sensitivity: Stepless Switch-on time at 22 °C: 0,00005 s Protection level darkened max.: DIN 13 Brightening time short/medium/long: 0,3 ~ 0,9 s Protection level bright: DIN 4 Protection level darkened min.: DIN 9 Ultraviolet protection UV permanent: DIN 16 Infrared protection IR permanent: DIN 16 Helmet material polyamide/nylon: Yes Operating temperature: -5 to +55 °C Storage temperature: -20 to +70 °C Cassette size (WxHxS): 115 x 125 x 18 mm Weight: 0,47 kg Scope of delivery: 1x Elmag Automatic Welding Shield FLAME 3x Faceplate outside 1x Faceplate inside 1x Color cardboard packaging

Elmag Automatic Welding Shield The MultiSafeVario® welding helmet offers welding protection at the highest level. With TRUE COLOR visor for perfect true color perception during welding. The MultiSafeVario® Welding helmet can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG inert gas welding, plasma cutting and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. The new TRUE COLOR glare shield enables a true color perception during welding. Due to the adjustable headband with locking mechanism the shield can be adjusted to the head size. Thanks to the UpandDown mechanism a center of gravity optimization when opening and closing the visor. The brightness level of the field of vision (98 x 43 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated. When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam. The protection level (degree of darkening for optimum vision, depending on the welding process or arc intensity) and the response (sensitivity) of the field of vision can be continuously adjustable at any time by means of controls on the outside of the helmet - one hand remains free for the welding torch. Areas of application: Already from 5 amps MMA/E-HAND/SMAW MIG/MAG/GMAW FILLING WIRE TIG/TIG/GTAW PLASMAS CUTTING GRINDING Overview: TRUE COLOR anti-glare cassette for true color perception during welding Field of view size (WxH) 98 x 43 mm Best rating in EN 379 Classification 1/1/1 Low switching time of only 0,05 ms Inside, adjustable delay/brightness External, adjustable sensitivity/sensitivity for optimal response Replaceable back-up batteries (2 PCS. CR2450) Suitable for overhead and forced position welding Welding and grinding mode Optionally available diopter disc inserts Aperture with up-and-down mechanism Comfortable, adjustable headband with snap-in mechanism Headband and brow welding band interchangeable Visor angle and wearing height adjustable Both hands free for set-up and welding work High welding quality due to continuous observation Technical data: Automatic fast forward and reverse: No Anti-glare filter: TRUE COLOR Field of view size (WxH): 98 x 43 mm Classification according to EN 379: 1/1/1 Light sensors: 4 Fully automatic: No Solar technology: Yes Power supply: Solar cells Mode switch welding/grinding: No Back-up battery: Yes Test switch: No Grinding mode: Yes Brightening delay short/medium/long: No Battery level indicator: No Protection level adjustment DIN EN 4/9-13: Stepless Protection level setting sensitivity: Stepless Protection level darkened max.: DIN 13 Switch-on time at 22 °C: 0,00005 s Brightening time short/medium/long: 0,3 ~ 0,9 s Protection level bright: DIN 4 Protection level darkened min.: DIN 9 Ultraviolet protection UV permanent: DIN 16 Infrared protection IR permanent: DIN 16 Helmet material polyamide/nylon: No Operating temperature: -5 to +55 °C Storage temperature: -20 to +70 °C Cassette size (WxHxS): 128 x 117 x 18 mm Weight: 0,52 kg Scope of delivery: 1x Elmag Automatic Welding Shield 3x Faceplate outside 1x Faceplate inside 1x Color cardboard packaging

Elmag Automatic Welding Shield ART The stylish MultiSafeVario® welding helmet offers welding protection at the highest level. The best-selling model from ELMAG has already proven itself thousands of times! The MultiSafeVario® Welding helmet "ART" can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG inert gas welding, plasma cutting and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. Due to the adjustable headband with snap-in mechanism the shield can be comfortably adjusted to the head size. It offers thanks to UpandDown mechanism a center of gravity optimization when opening and closing the visor. The brightness level of the large field of view (98 x 55 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated. When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam. The protection level (degree of darkening for optimum vision, depending on the welding process or arc intensity) and the response (sensitivity) of the field of vision can be continuously adjustable at any time by means of controls on the outside of the helmet - one hand remains free for the welding torch. Field of application: Already from 5 amps MMA/E-HAND/SMAW MIG/MAG/GMAW FILLER WIRE TIG/TIG/GTAW PLASMA CUTTING GRINDING Overview: Best-selling model from elmag, proven a thousand times over GREEN COLOR glare protection cassette Large field of view (WxH) 98 x 55 mm Stylish helmet design Low switching time of only 0,05 ms External, adjustable delay/brightening delay External, adjustable sensitivity for optimal response Replaceable back-up batteries (2 PCS. CR 2450) Test button to check function Suitable for overhead and forced position welding Welding and grinding mode Optionally available dioptric disc inserts Aperture with up-and-down mechanism Comfortable, adjustable headband with snap-in mechanism Headband and brow welding band interchangeable Visor angle and wearing height adjustable Both hands free for set-up and welding work High welding quality due to continuous observation Certified according to EN 379/175/166 and PPE (EU) 2016/425 Technical data: Automatic fast forward and reverse: No Anti-glare filter: GREEN COLOR Field of view size (WxH): 98 x 55 mm Classification according to EN 379: 1/1/1/2 Light sensors: 4 Fully automatic: Yes Solar technology: Yes Mode switch welding/grinding: Yes Power supply: Solar cells Back-up battery: Yes Test switch: Yes Grinding mode: No Fill-in delay short/medium/long: Yes Battery level indicator: No Protection level setting DIN EN 4/9-13: Stepless Protection level setting sensitivity: Stepless Switch-on time at 22 °C: 0,00005 s Protection level darkened max.: DIN 13 Brightening time short/medium/long: 0,3 ~ 0,9 s Protection level bright: DIN 4 Protection level darkened min.: DIN 9 Ultraviolet protection UV permanent: DIN 16 Infrared protection IR permanent: DIN 16 Helmet material polyamide/nylon: Yes Operating temperature: -5 to +55 °C Storage temperature: -20 to +70 °C Cassette size (WxHxS): 115 x 125 x 18 mm Weight: 0,47 kg Scope of delivery: 1x Elmag Automatic Welding Shield ART 3x Faceplate outside 1x Faceplate inside 1x Color cardboard packaging