Aesculap Econom II Sheep Clipper in a nutshell:


  • Powerful shearing machine for sheep
  • High shearing speed
  • 5 metre mains cable
  • With high quality shearing blades
  • Made in Germany

Aesculap Sheep Shearing Machine Econom II GT494

The Econom II Sheep shearing machine is a top class shearing machine with the well-known quality details from Aesculap.

The Econom II from Aesculap is a powerful, mains-operated sheep shearing machine that is produced exclusively in Germany. The powerful motor with 200 watts and only 76 dB (A) is optimally suited for continuous operation. The machine has 2,750 strokes/minute and ensures high pulling power and optimal shearing speed. Thanks to the air flow, the motor is excellently cooled even under high load.

The Econom II sheep shearing machine is ergonomically shaped, fits perfectly in the hand and weighs 1.200 grams. The mains cable of the shearing machine for sheep is 5 m long and offers enough space to move around the animal. The shearing blades are made of high-quality carbon steel and glide through any type of wool. The machine is supplied in a plastic case, in which the clipper can be safely stored and transported.

Overview:

  • Extremely high shearing speed
  • Great pulling power due to high motor power
  • Low heating thanks to large air flow rate
  • Ergonomic and slim housing
  • Balanced weight
  • Service-friendly design
  • Filter change without tools -pluggable circuit board
  • Integrated electronic start-up control and overload protection
  • Uniform and long-lasting cutting quality
  • Shearing blades made of abrasion-resistant carbon steel can be resharpened several times

Technical data:

  • Mode of operation: 230 V
  • Drive: DC motor
  • Gear: Spur gear
  • Power: 200 W
  • Sound pressure level: approx. 76 dB
  • Cutting speed: approx. 2.750 strokes/min
  • Cable length: 5 m
  • Weight: 1.200 g
  • Shearing head system: Shearing blade set
  • Lower / upper blade: 13/4 teeth
  • Remaining hair length: 3,5 mm

Scope of delivery:

1x Aesculap Econom II Sheep clipper (GT494)
1x Lower blade 13 teeth / 3,5 mm (GT588)
1x Upper blade 4 teeth (GT578)
1x Aesculap Shearing machine oil (GT604)
1x Sturdy plastic case

Manufacturer "Aesculap"

AESCULAP Clippers for Professionals and Veterinarians

Since 1912, the AESCULAP brand has stood for high quality from Germany. As a premium brand in the field of clippers and fur care, AESCULAP clippers are found in about 80% of professional dog grooming salons and in over 90% of veterinary practices in Germany. Clippers, clipper heads, and accessories for different areas can be found here with us!

Aesculap Clippers for Veterinarians

Cordless clippers and trimmers for special small-area grooming in veterinary care, such as back, neck, paws, and face

  • Trimmer for detailed grooming, battery life up to 40 minutes
  • Hybrid machine with clipper head, battery life up to 60 minutes
  • Hybrid machine - can operate on both power and battery, battery life up to 60 minutes
  • Trimmer for detailed grooming, runtime up to 100 minutes
  • Powerful and smooth-running, suitable for daily continuous use

Original Aesculap Clipper Heads

Aesculap Clippers for Domestic and Livestock Animals

With a diverse range of products from clippers to clipper heads and accessories, there's the right equipment for everyone!

Livestock clippers for horses, cattle, and sheep:

  • Full shave, low noise, stable clipping performance
  • Full shave, low noise development, runtime about 80 minutes
  • Ideal for cow-fitters, runtime up to 70 minutes
  • Electric operation, specially for sheep

For Breeders and Dog Groomers:

  • Battery or electric operation, runtime up to 60 minutes
  • Battery or electric operation, SnapOn system, suitable for continuous operation
  • SnapOn system, powerful and smooth for daily continuous use

For Finishing and Detail Work:

  • Trimmer for detailed grooming, runtime up to 100 minutes
  • Trimmer for detailed grooming, runtime up to 40 minutes

Original Aesculap Clipper Heads:

  • Recognized quality for professional use
  • 5 metal comb attachments (13 - 25 mm)
Dezibel: 76 dB
Country of origin: Germany
stroke rate: 2750 strokes/min
Capacity: 200 W
Power source: Cord
Animal species: Sheep

1 of 1 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


29 May 2021 22:21

Good Clipper and fast delivery to Denmark

This is a good Clipper for sheep. It is solid and easy to use. It was delivered in a few days to Denmark.

Aesculap clipper wall holder
Aesculap Wall holder for animal hair clippers - universal clipper holder Suitable holders for the electric hair clippers for screwing on vertical surfaces. The Aesculap wall holder is ideal for all professional dog groomers or veterinarians and order lovers. With this universal clipper holder your pet hair clipper is perfectly supplied. Simply mount it vertically on a wall with two screws. Suitable for cable-bound clippers. In 1912, the invention of the first electrically operated hair clippers was another milestone in the success story of Aesculap. As a premium brand in the field of clippers and hair care, we are aware of our responsibility towards professional and private users regarding consistently high quality! At present, shearing machines from Aesculap can be found in approx. 80% of professional dog grooming salons and in over 90% of all veterinary practices in Germany.

€31.99*
Pcs.
Aesculap Cutting head stand
Aesculap Cutting head stand Shearing head cassette for storing 5 cutting heads within easy reach. The Aesculap shaving head stand is ideal for storing up to 5 cutting heads practically and safely. With the plastic stand you will always find the right shaving head for your shaving machine. The cutting set cassette is made of red plastic and fits all Aesculap shearing heads.

€22.99*
Pcs.
Aesculap Shearing machine oil 90 ml
Aesculap Shearing machine oil 90ml The special oil for all Aesculap shearing machines, is suitable for all moving parts on and in the shearing head. The shearing machine oil ensures optimum lubrication of all moving parts in the shearing head. The oil is also excellently suitable for all common brand shearing machines. At a glance: does not resinify and does not stick together also suitable for all common shearing machine models Content: 90 ml Scope of delivery: 1x Aesculap Shearing machine oil 90ml

Content: 0.09 Litre (€103.22* / 1 Litre)

€9.29*
Pcs.
Aesculap Clipper Blade Econom for Sheep GT578 Upper blade 4 teeth, 4,5 mm
Size: GT578 Upper blade 4 teeth, 4,5 mm
Aesculap Shearing blade for Sheep Clipper Econom With the Aesculap shearing blades, even cutting thick wool is no problem! 100% Made in Germany. These upper and lower blades from Aesculap are compatible with the Aesculap Econom shearing machines II, CL, NOVA and NOVA CL. The special shearing blades are made of very high quality and low-wear carbon steel. This makes it possible to regrind the blades several times. The shear blades also convince with uniform and long-lasting cut quality. Care instructions: To ensure optimal life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Low wear and high quality shear blades Long cutting ability Cutting surfaces can be reground several times High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Sheep Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Cutting length: GT578 Upper blade (4 teeth), 4,5 mm suitable for Econom NOVA, Econom II, Econom CL, Econom NOVA CL GT588 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 77 mm GT594 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 86 mm GT598 Bottom blade (13 teeth), 3,5 mm suitable for Econom NOVA, Econom NOVA CL

€13.99*
Pcs.
Aesculap Clipper Blade Econom for Sheep GT588 Bottom blade 13 teeth, 3,5 mm
Size: GT588 Bottom blade 13 teeth, 3,5 mm
Aesculap Shearing blade for Sheep Clipper Econom With the Aesculap shearing blades, even cutting thick wool is no problem! 100% Made in Germany. These upper and lower blades from Aesculap are compatible with the Aesculap Econom shearing machines II, CL, NOVA and NOVA CL. The special shearing blades are made of very high quality and low-wear carbon steel. This makes it possible to regrind the blades several times. The shear blades also convince with uniform and long-lasting cut quality. Care instructions: To ensure optimal life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Low wear and high quality shear blades Long cutting ability Cutting surfaces can be reground several times High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Sheep Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Cutting length: GT578 Upper blade (4 teeth), 4,5 mm suitable for Econom NOVA, Econom II, Econom CL, Econom NOVA CL GT588 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 77 mm GT594 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 86 mm GT598 Bottom blade (13 teeth), 3,5 mm suitable for Econom NOVA, Econom NOVA CL

Variants from €13.99*
€49.99*
Pcs.
Precision Adjusting Aid Torqui for Cattle/Horse Clippers
Torqui Precision Adjusting Aid for Cattle/Horse Clippers The clipping plate pressure of Aesculap cattle/horse clippers is child's play to adjust with this innovative "torque key".* Torqui at a glance: precise basic adjustment of the plate pressure increased shearing plate life thanks to longer intervals between regrinding consistent edge-retention easy to handle no prior knowledge needed small, easy to handle, maintenance-free precision instrument engineered in Germany  suitable for all Bonum and Econom cattle and horse clippers

€57.99*
Pcs.
%
Aesculap Econom Clipper Head with Blade GT367
Model: GT367
Aesculap Clipper Head for Econom with Shearing Blade Set The matching shearing head and shearing blade set for the Econom sheep shearing machines. 100% Made in Germany. The shearing head with top plate and bottom plate from Aesculap is compatible with the Aesculap Econom shearing machines II, CL, NOVA and NOVA CL. The special shearing blades are made of very high-quality and low-wear carbon steel. This makes it possible to resharpen the blades several times. The shearing blades also convince with even and long-lasting cutting quality. Care instructions: To ensure the optimum life of the shearing head, regular and correct care is important. Clean the cutting plate with a soft cloth or brush. Make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades must be oiled before each use with the shearing head mounted. During work, oil every 5-10 minutes. After oiling, let the machine idle for a few seconds so that the oil can spread well and is not transferred to the animal's hair. With proper maintenance and care, the durability of the clipper blades can be increased by up to 20%. Regrinding can also be delayed. Overview: Very long service life due to abrasion-resistant carbon steel Low wear and high quality shearing blades Long cutting ability Cutting surfaces can be reground several times High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Sheep Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Cutting length: GT367 incl. Shearing Blade Set (GT502, GT501) suitable for Econom NOVA, Econom NOVA CL GT369 incl. Shearing Blade Set (GT588, GT578) suitable for Econom II, Econom CL

€235.00* €239.00*
Pcs.