Kerbl Frost protection heating cable for gutters and pipes 5 m

Frost protection heating cable for gutters and pipes

The plug-in frost protection heating cable keeps gutters and pipes free of frost.

The plug-in heating cable developed for gutter and piping fulfills the requirements for strength class M2 according to IEC60800: 2009 in order to keep gutters and piping safely frost-free. Thanks to the high heating output of 20 watts per meter, the heating cable keeps gutters, downpipes and pipes free of frost even at very low temperatures. The integrated temperature switch reliably switches the heating cable on at a temperature of +3 ° C and off again at +12 ° C.

Overview of antifreeze heating cables for gutters and pipes:

• Suitable for gutters: strength class M2
• Plug-in heating cable for easy installation
• Integrated thermostat for energy-saving use
• High protection class: IPX7
• Suitable for metal water pipes
• Incl. Earthing contact plug for high security
• Length of connecting cable: 2 m
• IPX7
• Protection class: I

Note:

• Please note that each heating cable connection must be protected by a separate FI circuit breaker. (e.g. Art. No. 296099, pluggable personal protection switch)
• The heating cable is in front of sharp edges, e.g. Protect at the transition from gutter to downpipe using edge protection (Art. No. 296098).
• The heating cable must never touch, overlap or cross another heating cable. In order to rule out contact permanently, the use of suitable spacers is recommended (Art. No. 296097).
• Pipes, metal gutters, protective pipes and metal sheaths must be earthed before laying for safety reasons.

Diameter:

• 6 mm

Sizes: Watt (length)

• 100 W (5 m)
• 200 W (10 m)
• 300 W (15 m)
• 400 W (20 m)
• 500 W (25 m)
• 800 W (40 m)
• 1000 W (50 m)

Content:

• 1 anti-freeze heating cable for gutters and pipes