Kerbl Kink Protector for Heating Cable, Stainless Steel incl. Ties

Frost protection heating cable for gutters and pipes The plug-in frost protection heating cable keeps gutters and pipes free of frost. The plug-in heating cable developed for gutter and piping fulfills the requirements for strength class M2 according to IEC60800: 2009 in order to keep gutters and piping safely frost-free. Thanks to the high heating output of 20 watts per meter, the heating cable keeps gutters, downpipes and pipes free of frost even at very low temperatures. The integrated temperature switch reliably switches the heating cable on at a temperature of +3 ° C and off again at +12 ° C. Overview of antifreeze heating cables for gutters and pipes: Suitable for gutters: strength class M2 Plug-in heating cable for easy installation Integrated thermostat for energy-saving use High protection class: IPX7 Suitable for metal water pipes Incl. Earthing contact plug for high security Length of connecting cable: 2 m IPX7 Protection class: I Note: Please note that each heating cable connection must be protected by a separate FI circuit breaker. (e.g. Art. No. 27598, pluggable personal protection switch) The heating cable is in front of sharp edges, e.g. Protect at the transition from gutter to downpipe using edge protection (Art. No. 27597). The heating cable must never touch, overlap or cross another heating cable. In order to rule out contact permanently, the use of suitable spacers is recommended (Art. No. 27596). Pipes, metal gutters, protective pipes and metal sheaths must be earthed before laying for safety reasons. Diameter: 6 mm Sizes: Watt (length) 100 W (5 m) 200 W (10 m) 300 W (15 m) 400 W (20 m) 500 W (25 m) 800 W (40 m) 1000 W (50 m) Content: 1 anti-freeze heating cable for gutters and pipes

Kerbl Spacer for Heating Cable – Safe Routing Without Contact PointsThe spacer for heating cable from Kerbl keeps frost protection and heating cables safely apart on gutters, downpipes and pipework. For farmers and smallholders looking to keep water troughs, pipes or gutters frost-free, correct cable routing is essential – contact points can cause overheating and should always be avoided.The 5 spacers are quick and easy to fit using the included cable ties, and the holes in each spacer keep the heating cable securely fixed so it cannot slip. Kerbl recommends fitting spacers every 30 cm along the cable, and every 15 cm inside downpipes – keeping the heating cable permanently contact-free and reliable, whether on farm buildings, field troughs or house guttering.At a glance:Permanently prevents the heating cable touching, crossing or overlappingEnsures safe, reliable cable routing without short-circuit riskSuitable for heating cables and frost protection cables of all kinds (e.g. item no. 26592)Quick, tool-free mounting with the included cable tiesCompact and lightweight – ideal for gutters, downpipes and pipeworkTechnical Data:Dimensions: approx. 9 x 6 x 2.5 cmWeight: approx. 20 gSales unit: 5x spacersRecommended mounting interval: every 30 cm (every 15 cm inside downpipes)Scope of Delivery:5x Spacer for heating cable10x Cable tiesFAQ:What spacing should I use when mounting the spacers?Kerbl recommends fitting spacers every 30 cm along the cable, and every 15 cm inside downpipes.Which heating cables are the spacers suitable for?They fit heating cables and frost protection cables of all kinds, for example the Kerbl gutter heating cable (item no. 26592).Do I need extra tools to fit them?No, mounting is simple using the included 10 cable ties, no extra tools required.

Personal protection switch RCD switch BDI-A 2 30 The BDI-A 2 30 Personal protection adapter (also called RCD) is used to protect against dangerous electric shocks. Thanks to the residual-current circuit breaker, faulty currents are detected immediately and disconnected from the mains at lightning speed. Life-threatening electrical accidents, e.g. caused by direct or indirect contact with live equipment, are effectively prevented with the personal protection plug. The circuit breaker with hinged cover is equipped with protection class IP54, which means that it is dust-proof and splash-proof and ideally suited for outdoor use. At a glance: Disconnects the active conductors from the mains as soon as residual currents occur Provides protection against life-threatening electric shocks Reliable personal protection with 30 mA rated residual current Residual current circuit-breaker with double-pole disconnection Suitable for outdoor use thanks to protection class IP54 Personal protection plug with hinged cover, thus protected against dust and splash water Suitable for heating cable item no. 26592 With child protection Technical data: Nominal frequency: 50 Hz - 60 Hz Max. switching capacity: 3.500 W Max. Current carrying capacity: 16 A Max. Ambient temperature: 40 °C Min. Ambient temperature: -25 °C Area of application: Outdoor Protection class: IP54 Scope of delivery: 1x RCD Personal protection switch BDI-A 2 30