Aesculap Econom NOVA Sheep Clipper in a nutshell:


  • Shear sheep easily and precisely
  • Excellent penetration
  • Ergonomic handling
  • Shearing blades made of special steel
  • Low maintenance and durable

Aesculap Sheep Clipper Econom NOVA GT694

The new Econom NOVA is a powerful shearing machine with a newly developed shearing head and extra short shearing blade for excellent shearing of sheep.

Shearing sheep is made easy with the Econom NOVA Sheep shearing machine. The shearing machine is suitable for full shearing of sheep, angora goats and similar animals with thick, woolly coats. The powerful high-performance motor with 2.750 strokes/min manages even the largest coat hurdle and allows the clipper to glide consistently through the coat. The slim housing and the weight balance promise low-fatigue and ergonomic handling even during long periods of use.

The newly designed shearing head to accommodate the specially developed GT598 short shearing blade, is compatible with the shearing blades of most other manufacturers. The low-wear shearing blade set made of special steel ensures an extremely clean and even cut. The shearing blades can be sharpened several times and are therefore very durable.

A perfect air flow concept keeps the heating in the handle area and the clipper head low. Easy maintenance is ensured by a tool-free filter and carbon brush change. The integrated electronic start-up control and overload protection offer the greatest possible operational safety.

Note: To increase the service life of the clipper, the clipper should always be maintained with clipper oil before and after clipping. It is also very important to oil the clipper every 5 to 10 minutes during clipping.

Overview:

  • Shear sheep easily and precisely
  • Excellent Penetration
  • Ergonomic handling
  • Optimal weight distribution
  • Low maintenance and long service life
  • With short shearing blade set made of special steel
  • Low heating of handle and clipper head
  • Clipper head compatible with other clipper blades
  • Tool-free filter and carbon replacement
  • Operational safety due to electronic start-up control
  • Integrated overload protection

Technical data:

  • Operating mode: 230 V
  • Drive: DC motor
  • Power: 200 W DC / 400 W AC
  • Gear: Spur gear
  • Stroke rate: approx. 2.750 strokes/min
  • Sound pressure level: approx. 76 dB
  • Cable length: 5 m
  • Weight: 1.200 g
  • Shearing head System: Shearing blade set
  • Lower / upper blade: 13/4 teeth
  • Residual hair length: approx. 4,5 mm

Scope of delivery:

1x Aesculap Econom NOVA Sheep Clipper (GT694)
1x Lower blade 13 teeth / 3,5 mm (GT598)
1x Upper blade 4 teeth / 4,5 mm (GT578)
1x Aesculap Clipper oil (GT604)
1x Instruction manual
1x Hard case

Manufacturer "Aesculap"

AESCULAP Clippers for Professionals and Veterinarians

Since 1912, the AESCULAP brand has stood for high quality from Germany. As a premium brand in the field of clippers and fur care, AESCULAP clippers are found in about 80% of professional dog grooming salons and in over 90% of veterinary practices in Germany. Clippers, clipper heads, and accessories for different areas can be found here with us!

Aesculap Clippers for Veterinarians

Cordless clippers and trimmers for special small-area grooming in veterinary care, such as back, neck, paws, and face

  • Trimmer for detailed grooming, battery life up to 40 minutes
  • Hybrid machine with clipper head, battery life up to 60 minutes
  • Hybrid machine - can operate on both power and battery, battery life up to 60 minutes
  • Trimmer for detailed grooming, runtime up to 100 minutes
  • Powerful and smooth-running, suitable for daily continuous use

Original Aesculap Clipper Heads

Aesculap Clippers for Domestic and Livestock Animals

With a diverse range of products from clippers to clipper heads and accessories, there's the right equipment for everyone!

Livestock clippers for horses, cattle, and sheep:

  • Full shave, low noise, stable clipping performance
  • Full shave, low noise development, runtime about 80 minutes
  • Ideal for cow-fitters, runtime up to 70 minutes
  • Electric operation, specially for sheep

For Breeders and Dog Groomers:

  • Battery or electric operation, runtime up to 60 minutes
  • Battery or electric operation, SnapOn system, suitable for continuous operation
  • SnapOn system, powerful and smooth for daily continuous use

For Finishing and Detail Work:

  • Trimmer for detailed grooming, runtime up to 100 minutes
  • Trimmer for detailed grooming, runtime up to 40 minutes

Original Aesculap Clipper Heads:

  • Recognized quality for professional use
  • 5 metal comb attachments (13 - 25 mm)
Dezibel: 76 dB
Country of origin: Germany
stroke rate: 2750 strokes/min
Capacity: 200 W, 400 W
Power source: Cord
Animal species: Goat, Sheep

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Aesculap clipper wall holder
Aesculap Wall holder for animal hair clippers - universal clipper holder Suitable holders for the electric hair clippers for screwing on vertical surfaces. The Aesculap wall holder is ideal for all professional dog groomers or veterinarians and order lovers. With this universal clipper holder your pet hair clipper is perfectly supplied. Simply mount it vertically on a wall with two screws. Suitable for cable-bound clippers. In 1912, the invention of the first electrically operated hair clippers was another milestone in the success story of Aesculap. As a premium brand in the field of clippers and hair care, we are aware of our responsibility towards professional and private users regarding consistently high quality! At present, shearing machines from Aesculap can be found in approx. 80% of professional dog grooming salons and in over 90% of all veterinary practices in Germany.

€31.99*
Pcs.
Aesculap Cutting head stand
Aesculap Cutting head stand Shearing head cassette for storing 5 cutting heads within easy reach. The Aesculap shaving head stand is ideal for storing up to 5 cutting heads practically and safely. With the plastic stand you will always find the right shaving head for your shaving machine. The cutting set cassette is made of red plastic and fits all Aesculap shearing heads.

€22.99*
Pcs.
Aesculap Shearing machine oil 90 ml
Aesculap Shearing machine oil 90ml The special oil for all Aesculap shearing machines, is suitable for all moving parts on and in the shearing head. The shearing machine oil ensures optimum lubrication of all moving parts in the shearing head. The oil is also excellently suitable for all common brand shearing machines. At a glance: does not resinify and does not stick together also suitable for all common shearing machine models Content: 90 ml Scope of delivery: 1x Aesculap Shearing machine oil 90ml

Content: 0.09 Litre (€103.22* / 1 Litre)

€9.29*
Pcs.
Aesculap Clipper Blade Econom for Sheep GT578 Upper blade 4 teeth, 4,5 mm
Size: GT578 Upper blade 4 teeth, 4,5 mm
Aesculap Shearing blade for Sheep Clipper Econom With the Aesculap shearing blades, even cutting thick wool is no problem! 100% Made in Germany. These upper and lower blades from Aesculap are compatible with the Aesculap Econom shearing machines II, CL, NOVA and NOVA CL. The special shearing blades are made of very high quality and low-wear carbon steel. This makes it possible to regrind the blades several times. The shear blades also convince with uniform and long-lasting cut quality. Care instructions: To ensure optimal life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Low wear and high quality shear blades Long cutting ability Cutting surfaces can be reground several times High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Sheep Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Cutting length: GT578 Upper blade (4 teeth), 4,5 mm suitable for Econom NOVA, Econom II, Econom CL, Econom NOVA CL GT588 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 77 mm GT594 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 86 mm GT598 Bottom blade (13 teeth), 3,5 mm suitable for Econom NOVA, Econom NOVA CL

€13.99*
Pcs.
Aesculap Clipper Blade Econom for Sheep GT598 Bottom blade 13 teeth, 3,5 mm
Size: GT598 Bottom blade 13 teeth, 3,5 mm
Aesculap Shearing blade for Sheep Clipper Econom With the Aesculap shearing blades, even cutting thick wool is no problem! 100% Made in Germany. These upper and lower blades from Aesculap are compatible with the Aesculap Econom shearing machines II, CL, NOVA and NOVA CL. The special shearing blades are made of very high quality and low-wear carbon steel. This makes it possible to regrind the blades several times. The shear blades also convince with uniform and long-lasting cut quality. Care instructions: To ensure optimal life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Low wear and high quality shear blades Long cutting ability Cutting surfaces can be reground several times High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Sheep Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Cutting length: GT578 Upper blade (4 teeth), 4,5 mm suitable for Econom NOVA, Econom II, Econom CL, Econom NOVA CL GT588 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 77 mm GT594 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 86 mm GT598 Bottom blade (13 teeth), 3,5 mm suitable for Econom NOVA, Econom NOVA CL

Variants from €13.99*
€42.99*
Pcs.
%
Aesculap Econom Clipper Head with Blade GT367
Model: GT367
Aesculap Clipper Head for Econom with Shearing Blade Set The matching shearing head and shearing blade set for the Econom sheep shearing machines. 100% Made in Germany. The shearing head with top plate and bottom plate from Aesculap is compatible with the Aesculap Econom shearing machines II, CL, NOVA and NOVA CL. The special shearing blades are made of very high-quality and low-wear carbon steel. This makes it possible to resharpen the blades several times. The shearing blades also convince with even and long-lasting cutting quality. Care instructions: To ensure the optimum life of the shearing head, regular and correct care is important. Clean the cutting plate with a soft cloth or brush. Make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades must be oiled before each use with the shearing head mounted. During work, oil every 5-10 minutes. After oiling, let the machine idle for a few seconds so that the oil can spread well and is not transferred to the animal's hair. With proper maintenance and care, the durability of the clipper blades can be increased by up to 20%. Regrinding can also be delayed. Overview: Very long service life due to abrasion-resistant carbon steel Low wear and high quality shearing blades Long cutting ability Cutting surfaces can be reground several times High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Sheep Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Cutting length: GT367 incl. Shearing Blade Set (GT502, GT501) suitable for Econom NOVA, Econom NOVA CL GT369 incl. Shearing Blade Set (GT588, GT578) suitable for Econom II, Econom CL

€235.00* €239.00*
Pcs.