Skip to main content

Aesculap Sheep Clipper Econom NOVA CL battery GT684

Cordless all-round sheep shearing machine of the latest generation, which convinces with its excellent penetrating power.

The Aesculap Econom NOVA CL is a powerful battery-powered clipper with a newly developed clipper head for full shearing of sheep, Angora goats and similar animals with thick, woolly coats. The battery-operated sheep clipper has an enormous pulling power like a cable-operated clipper. It impresses with its long battery life up to 70 minutes and low heat generation.

The use of a brushless direct current motor (EC Motor) with the latest lithium technology ensures long operating times with constantly high Performance with approx. 2.700 strokes/min. The shearing machine achieves an optimal shearing result and a long overall service life thanks to the electronic control, which perfectly controls the power output depending on the resistance at the drive.

The newly designed shearing head to accommodate the specially developed GT598 short shearing blade is compatible with the shearing blades of most other manufacturers. The shearing blade set cuts extremely cleanly and evenly. The blades can be sharpened several times and are therefore very durable.

The slim housing and the weight balance promise low-fatigue and ergonomic handling even during long periods of use. The electronic pressure switch recessed in the housing prevents accidental switching on/off when reaching around.

Note: To increase the service life of the clipper, it should always be maintained with clipper oil before and after clipping. It is also very important to oil the clipper every 5 to 10 minutes during clipping.

Overview:

  • Shear sheep powerfully and precisely
  • Excellent clipping power
  • Long battery life
  • Low heat Generation
  • Ergonomic handling
  • Very well balanced
  • Includes battery and clipper blade set
  • High total life
  • Recessed electronic pressure switch
  • Clipper head compatible with other clipper blades

Technical data:

  • Operating mode: Battery
  • Drive: Brushless EC motor
  • Power: 75 Watt
  • Gear: Spur gear
  • Battery technology: Li-Ion
  • Battery capacity: 3.500 mAh
  • Battery life: approx. 70 min
  • Battery charging time: approx. 80 min
  • Cutting speed: approx. 2.700 strokes/min
  • Sound pressure level: approx. 72 dB
  • Weight: 1.470 g (incl. battery and shaving head)
  • Shearing head system: Shearing blade set
  • Lower / upper blade: 13/4 teeth
  • Residual hair length: approx. 4,5 mm

Scope of delivery:

1x Aesculap Econom NOVA CL Sheep clipper (GT684)
1x Li-Ion battery (GT821)
1x Charging station (GT803)
1x Lower blade 13 teeth / 3,5 mm (GT598)
1x Upper blade 4 teeth / 4,5 mm (GT578)
1x Aesculap Clipper oil (GT604)
1x Instruction manual
1x Sturdy plastic case

Battery Runtime: 80 min
Dezibel: 72 dB
Country of origin: Germany
stroke rate: 2700 strokes/min
Capacity: 75 W
Power source: Rechargeable battery
Animal species: Sheep, Goat
Manufacturer warranty: 3 years
Data according to manufacturer. Errors and changes reserved.
Available downloads

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Experience perfection in grooming with Aesculap clippers - your partner for professional grooming since 1912. Aesculap stands for outstanding German quality and offers a wide product range for every requirement. Cordless clippers and trimmers allow maximum flexibility for detailed clipping, while hybrid machines offer the choice between mains and battery operation. The machines are powerful, smooth-running and ideal for everyday use. Perfect for pets and farm animals, they offer reliable and stress-free shearing with stable performance and low noise. Original Aesculap shaving heads guarantee recognized quality for professional results. Choose Aesculap and trust in over 100 years of precision and longevity.

Manufacturer information

Responsible person

Aesculap

    Choose accessories

    Aesculap clipper wall holder
    Aesculap clipper wall holder
    Aesculap Wall holder for animal hair clippers - universal clipper holder Suitable holders for the electric hair clippers for screwing on vertical surfaces. The Aesculap wall holder is ideal for all professional dog groomers or veterinarians and order lovers. With this universal clipper holder your pet hair clipper is perfectly supplied. Simply mount it vertically on a wall with two screws. Suitable for cable-bound clippers. In 1912, the invention of the first electrically operated hair clippers was another milestone in the success story of Aesculap. As a premium brand in the field of clippers and hair care, we are aware of our responsibility towards professional and private users regarding consistently high quality! At present, shearing machines from Aesculap can be found in approx. 80% of professional dog grooming salons and in over 90% of all veterinary practices in Germany.

    €31.99*
    Aesculap Cutting head stand
    Aesculap Cutting head stand
    Aesculap Cutting head stand Shearing head cassette for storing 5 cutting heads within easy reach. The Aesculap shaving head stand is ideal for storing up to 5 cutting heads practically and safely. With the plastic stand you will always find the right shaving head for your shaving machine. The cutting set cassette is made of red plastic and fits all Aesculap shearing heads.

    €22.99*
    Aesculap Shearing machine oil 90 ml
    Aesculap Shearing machine oil 90 ml
    Aesculap Shearing machine oil 90ml The special oil for all Aesculap shearing machines, is suitable for all moving parts on and in the shearing head. The shearing machine oil ensures optimum lubrication of all moving parts in the shearing head. The oil is also excellently suitable for all common brand shearing machines. At a glance: does not resinify and does not stick together also suitable for all common shearing machine models Content: 90 ml Scope of delivery: 1x Aesculap Shearing machine oil 90ml

    Content: 0.09 Litre (€103.22* / 1 Litre)

    €9.29*
    Aesculap Clipper Blade Econom for Sheep GT578 Upper blade 4 teeth, 4,5 mm
    Aesculap Clipper Blade Econom for Sheep GT578 Upper blade 4 teeth, 4,5 mm
    Size: GT578 Upper blade 4 teeth, 4,5 mm
    Aesculap Shearing blade for Sheep Clipper Econom With the Aesculap shearing blades, even cutting thick wool is no problem! 100% Made in Germany. These upper and lower blades from Aesculap are compatible with the Aesculap Econom shearing machines II, CL, NOVA and NOVA CL. The special shearing blades are made of very high quality and low-wear carbon steel. This makes it possible to regrind the blades several times. The shear blades also convince with uniform and long-lasting cut quality. Care instructions: To ensure optimal life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Low wear and high quality shear blades Long cutting ability Cutting surfaces can be reground several times High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Sheep Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Cutting length: GT578 Upper blade (4 teeth), 4,5 mm suitable for Econom NOVA, Econom II, Econom CL, Econom NOVA CL GT588 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 77 mm GT594 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 86 mm GT598 Bottom blade (13 teeth), 3,5 mm suitable for Econom NOVA, Econom NOVA CL

    €13.99*
    Aesculap Econom CL Battery 3500 mAh
    Aesculap Econom CL Battery 3500 mAh
    Aesculap Spare Battery for Clipper Econom CL suitable for Aesculap Clipper Econom CL lithium-ion technology, no memory effect Capacity: 3500 mAh

    €259.99*
    Aesculap Clipper Blade Econom for Sheep GT598 Bottom blade 13 teeth, 3,5 mm
    Aesculap Clipper Blade Econom for Sheep GT598 Bottom blade 13 teeth, 3,5 mm
    Size: GT598 Bottom blade 13 teeth, 3,5 mm
    Aesculap Shearing blade for Sheep Clipper Econom With the Aesculap shearing blades, even cutting thick wool is no problem! 100% Made in Germany. These upper and lower blades from Aesculap are compatible with the Aesculap Econom shearing machines II, CL, NOVA and NOVA CL. The special shearing blades are made of very high quality and low-wear carbon steel. This makes it possible to regrind the blades several times. The shear blades also convince with uniform and long-lasting cut quality. Care instructions: To ensure optimal life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Low wear and high quality shear blades Long cutting ability Cutting surfaces can be reground several times High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Sheep Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Cutting length: GT578 Upper blade (4 teeth), 4,5 mm suitable for Econom NOVA, Econom II, Econom CL, Econom NOVA CL GT588 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 77 mm GT594 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 86 mm GT598 Bottom blade (13 teeth), 3,5 mm suitable for Econom NOVA, Econom NOVA CL

    Variants from €13.99*
    €42.99*