Aesculap FAV5 Clipper in a nutshell:


  • For domestic animals and partial shearing horses
  • Excellent shearing force
  • Slim, ergonomically shaped housing
  • With Aesculap shearing head GT330 #10 (1,5 mm)
  • Professional quality from Germany

Aesculap Clipper FAV5 GT105

The Aesculap FAV5 clipper is the ideal clipper for your pet. With the FAV5, you can reach even those hard-to-reach places.

The FAV5 clipper combines the robustness and sophisticated technology of the Favorita product series with the Aesculap SnapOn clipper head system. The smooth-running, ball-bearing motor is powerful and gives the FAV5 excellent shearing force. This makes the clipper very suitable for continuous use on pets and for detailed clipping of horses. Consistently good shearing results are achieved by a wear-resistant metal oscillating lever. The easy-to-clean air filter and the well-tuned ventilation system ensure protection against overheating and a long service life.

Another special feature of the battery-powered pet hair clipper is the particularly ergonomic, slim housing made of unbreakable special plastic. The well thought-out design allows for low-fatigue clipping. The switch in the front area of the pet hair clipper promises comfortable one-handed operation. The GT330 #10 shearing head supplied rounds off the Aesculap FAV5 perfectly. The 1,5 mm cutting set is suitable for short fur and impresses with a precise, clean cutting pattern.

Overview:

  • Ideal for dogs and partial shearing of horses
  • Powerful, ball-bearing motor
  • Wear-resistant metal oscillating lever
  • Consistently good cutting results
  • Nearly vibration-free operation
  • Tuned ventilation system reduces heat
  • Switch in front area
  • Slim, ergonomically shaped housing
  • Made of unbreakable special plastic
  • Long life
  • SnapOn shaving head system (also suitable for Oster, Andis, Wahl and Moser brands)
  • Supplied with shaving head GT330 #10 (1,5 mm)
  • Made in Germany

Technical data:

  • Mode of operation: 230 V
  • Drive: Universal
  • Gearbox: Worm Wheel
  • Power: 30 watts
  • Sound pressure level: approx. 70 dB
  • Cutting speed: approx. 2.300 strokes/min
  • Cable length: 5 m
  • Weight: 800 g (without shaving head)
  • Shaving head system: Aesculap SnapOn, Compatible

Scope of delivery:

1x Aesculap FAV5 Clipper (GT105)
1x Clipper head 1,5 mm #10 (GT330)
1x Aesculap Clipper oil (GT604)
1x Instruction manual
1x Sturdy plastic case

Manufacturer "Aesculap"

AESCULAP Clippers for Professionals and Veterinarians

Since 1912, the AESCULAP brand has stood for high quality from Germany. As a premium brand in the field of clippers and fur care, AESCULAP clippers are found in about 80% of professional dog grooming salons and in over 90% of veterinary practices in Germany. Clippers, clipper heads, and accessories for different areas can be found here with us!

Aesculap Clippers for Veterinarians

Cordless clippers and trimmers for special small-area grooming in veterinary care, such as back, neck, paws, and face

  • Trimmer for detailed grooming, battery life up to 40 minutes
  • Hybrid machine with clipper head, battery life up to 60 minutes
  • Hybrid machine - can operate on both power and battery, battery life up to 60 minutes
  • Trimmer for detailed grooming, runtime up to 100 minutes
  • Powerful and smooth-running, suitable for daily continuous use

Original Aesculap Clipper Heads

Aesculap Clippers for Domestic and Livestock Animals

With a diverse range of products from clippers to clipper heads and accessories, there's the right equipment for everyone!

Livestock clippers for horses, cattle, and sheep:

  • Full shave, low noise, stable clipping performance
  • Full shave, low noise development, runtime about 80 minutes
  • Ideal for cow-fitters, runtime up to 70 minutes
  • Electric operation, specially for sheep

For Breeders and Dog Groomers:

  • Battery or electric operation, runtime up to 60 minutes
  • Battery or electric operation, SnapOn system, suitable for continuous operation
  • SnapOn system, powerful and smooth for daily continuous use

For Finishing and Detail Work:

  • Trimmer for detailed grooming, runtime up to 100 minutes
  • Trimmer for detailed grooming, runtime up to 40 minutes

Original Aesculap Clipper Heads:

  • Recognized quality for professional use
  • 5 metal comb attachments (13 - 25 mm)
Dezibel: 70 dB
Country of origin: Germany
stroke rate: 2300 strokes/min
Capacity: 30 W
Power source: Cord
Animal species: Dog, Horse

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Clipper Blade SnapOn for Moser Max 45 / Max 50
Clipper Blade Moser Max 45 / Moser Max 50 Precision ground cutting set from WAHL - High quality workmanship 100% made in Germany. The original Moser Snap-On Clipper head from WAHL is a precision ground full metal cutting set. The cutting set is "Made in Germany" and suitable for professional use as well as for the home user. The shearing head is made of high quality stainless steel by cross grinding and not punched. This manufacturing method gives the shearing head an extremely long service life. The grooved profile on the back ensures optimal cooling of the cutting set. The special shaving head geometry and the optimally adjusted cutting pressure ensure an exact cut. Thanks to the high quality of workmanship, the cutting set can be reground several times. The Moser replacement shear blades are compatible with all current brand-name devices that use a Snap On cutting set. The SnapON change system makes it easy to slide the shearing head on and off in seconds, without the use of tools. Care Tip: To ensure optimal life of the shaving head, regular and proper care is important. Clean the cutting plates with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil can be well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the shaving heads can be increased up to 20%. Also the regrinding can be delayed. Overview: For all shearing machines with SnapOn High processing quality Made of high quality stainless steel Very long cutting ability Multiple regrindable All parts are cross and profile ground Made in Germany Suitable among others for the following shearing machines: Moser Max 45 Moser Max 50 Oster Golden A5 Oster A6 Comfort Oster A6 Slim Oster Pro 3000i Oster PowerPro Ultra Oster Power Max Aesculap Durati Aesculap FAV5 Aesculap FAV5 CL Aesculap FAV5 Hybrid Aesculap Fortis Wahl Avalon Wahl KM2 Wahl KM5 Wahl KM10 Wahl KM Cordless Wahl KM Cordless Horse Kerbl Clipper PROFI More shearing machines with SnapOn Clipper Blades Cutting length: 1/10 mm, #40F for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, heavily tangled, matted, knotted 1/20 mm, #50F for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, strongly tangled, matted, knotted 1 mm, #30F (fine teeth) for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, strongly tangled, matted, knotted 2 mm, #10F (fine teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier, Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle / coat type: short, bristly, long, fine, with or without undercoat, strongly tangled 2,3 mm, #10W (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 3 mm, #8,5F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier, Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle / coat type: short, bristly, long, fine, with or without undercoat, strongly tangled 5 mm, #7F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 7 mm, #5F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 9 mm, #4F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat

€49.99*
Aesculap clipper wall holder
Aesculap Wall holder for animal hair clippers - universal clipper holder Suitable holders for the electric hair clippers for screwing on vertical surfaces. The Aesculap wall holder is ideal for all professional dog groomers or veterinarians and order lovers. With this universal clipper holder your pet hair clipper is perfectly supplied. Simply mount it vertically on a wall with two screws. Suitable for cable-bound clippers. In 1912, the invention of the first electrically operated hair clippers was another milestone in the success story of Aesculap. As a premium brand in the field of clippers and hair care, we are aware of our responsibility towards professional and private users regarding consistently high quality! At present, shearing machines from Aesculap can be found in approx. 80% of professional dog grooming salons and in over 90% of all veterinary practices in Germany.

€31.99*
Pcs.
Aesculap Cutting head stand
Aesculap Cutting head stand Shearing head cassette for storing 5 cutting heads within easy reach. The Aesculap shaving head stand is ideal for storing up to 5 cutting heads practically and safely. With the plastic stand you will always find the right shaving head for your shaving machine. The cutting set cassette is made of red plastic and fits all Aesculap shearing heads.

€22.99*
Pcs.
Aesculap Set of comps snap-on for GT317GT326GT330GT333
Aesculap Attachment comb set SnapOn GTA129 The attachment combs are suitable for SnapOn shear heads gt317, gt326, gt330 and gt333. The 5 SnapOn attachment combs can be easily attached and removed from the shaving head. The stainless steel attachment combs glide gently and efficiently through the coat thanks to their slender metal teeth. No getting caught in the coat and bending of the teeth. The result of the attachment combs from Aesculap is an even cutting pattern. The right cutting set for every coat length. Overview: even and optimal cutting pattern different cutting lengths can be easily implemented glides easily through the fur quick and easy to attach Set consisting of 5 SnapOn attachment combs (only available as a set) Suitable for SnapOn shear heads gt317 (#30), gt326 (#15), gt330 (#10), gt333 (#9) Scope of delivery: Set consists of: Cutting length Attachment comb GT133 13 mm Attachment comb GT134 16 mm Attachment comb GT135 19 mm Attachment comb GT136 22 mm Attachment comb GT137 25 mm    

€49.99*
Pcs.
Aesculap Shearing machine oil 90 ml
Aesculap Shearing machine oil 90ml The special oil for all Aesculap shearing machines, is suitable for all moving parts on and in the shearing head. The shearing machine oil ensures optimum lubrication of all moving parts in the shearing head. The oil is also excellently suitable for all common brand shearing machines. At a glance: does not resinify and does not stick together also suitable for all common shearing machine models Content: 90 ml Scope of delivery: 1x Aesculap Shearing machine oil 90ml

Content: 0.09 Litre (€103.22* / 1 Litre)

€9.29*
Pcs.
Aesculap Clipper Blade SnapOn 1,5 mm, GT330 #10
Size: 1,5 mm, GT330 #10
Aesculap Clipper Blade SnapOn - Replacement shearing head for SnapOn Clippers Recognized quality for professional use - 100% made in Germany Due to the special Aesculap-Carbon-Steel the Snap-On shear heads have a significantly higher cutting capacity than conventional cutting sets. The good processing quality of the Aesculap CNC manufacturing centers guarantees a consistently high quality. The Aesculap shear heads are milled and profile ground. The high-end surface finishing provides a high level of corrosion protection. This makes the Snap-On shear heads very durable, can be ground several times and optimally suited for professional use in the dog grooming or veterinary sector. Care instructions: To ensure the optimum life of the shaving head, regular and correct care is important. Clean the cutting plates with a soft cloth or brush. Make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper head with special clipper oil (GT604). The shearing blades must be oiled before each use with the shearing head mounted. During work, oil every 5-10 minutes. After oiling, let the machine idle for a few seconds so that the oil can spread well and is not transferred to the animal's hair. With proper maintenance and care, the durability of the shearing heads can be increased by up to 20%. Regrinding can also be delayed. Overview: Aesculap-Carbon-Steel Very long cutting ability Multiple regrindable High processing quality due to Aesculap CNC machining centers All parts are milled and profile ground High-end surface finishing High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Moser Max 45 Moser Max 50 Oster Golden A5 Oster Golden A6 Comfort Oster Golden A6 Slim Oster PRO3000i Oster PowerPro Ultra Oster Power Max Aesculap Durati Aesculap FAV5 Aesculap FAV5 CL Aesculap Hybrid Aesculap Fortis Andis Pulse ZR Andis MBG-2 Andis Supert AGC Andis Super AGR Plus Wahl Avalon Wahl KM2 Wahl KM5 Wahl KM10 Wahl KM Cordless Wahl KM Cordless Horse Kerbl Professional K18266 Cutting length: GT305, 0,2 mm #50 GT310, 0,25 mm #40 (Fine cutting set) GT317, 0,5 mm #30 GT320, 0,8 mm #5/8 (narrow, for face and paws) GT323, 0,8 mm #7/8 GT326, 1,2 mm #15 GT330, 1,5 mm #10 GT333, 2,0 mm #9 GT339, 2,4 mm #10W GT341, 2,8 mm #8 1/2 GT343, 3,2 mm #7 GT345, 3,2 mm #7F (Fine cutting set) GT357, 6,3 mm #5 GT360, 6,3 mm #5F (Fine cutting set) GT366, 9,5 mm #4 GT364, 9,5 mm #4F (Fine cutting set)

€55.99*
Pcs.