Skip to main content

Aesculap Econom II - the professional clipper for cattle and horses GT474

The Aesculap Econom II is a professional animal clipper with clipper blades especially for cattle - but also for horse clipping.

The Econom II cattle and horse clipper convinces with excellent shearing speed and high stroke rate. Thanks to the optimal traction and high motor power, you can shear your charges with consistent quality every time. The ergonomically designed housing has a well-balanced weight and enables low-fatigue clipping for everyone.

The power cord of the clipper for horses and cattle has a length of 5 m and offers enough space to move around the animal. The clipper from Aesculap is designed to be extra service-friendly and therefore very easy to handle. The shearing blades are made of abrasion-resistant carbon steel and are particularly wear-resistant. The machine is supplied in a plastic case in which the clipper can be safely stored and transported.

Overview:

  • High shearing speed
  • Excellent pulling power
  • Ergonomic handling and weight balance
  • Service & user-friendly
  • Low heating thanks to large air flow rate  
  • Filter change without tools -Easy carbon replacement -Plug-in board
  • Integrated start-up control and overload protection
  • Uniform and long-lasting cutting quality
  • Shearing blades made of abrasion-resistant carbon steel

Technical data:

  • Mode of operation: 230 V
  • Drive: DC motor
  • Gear: spur gear
  • Power: 200 W
  • Sound pressure level: approx. 73 dB
  • Cutting speed: approx. 2.750 strokes/min
  • Cable length: 5 m
  • Weight: approx. 1.200 g (without cable)
  • Shearing head system: Shearing blade set
  • Lower / upper blade: 31/15 teeth
  • Remaining hair length: 3 mm

Scope of delivery:

1x Aesculap Econom II Clipper cattle horses (GT474)
1x Lower blade 31 teeth / 3 mm (GT502)
1x Upper blade 15 teeth (GT501)
1x Aesculap Clipper oil (GT604)
1x Sturdy plastic case

Dezibel: 73 dB
Country of origin: Germany
stroke rate: 2750 strokes/min
Capacity: 200 W
Power source: Cord
Animal species: Horse, Cattle
Manufacturer warranty: 3 years
Data according to manufacturer. Errors and changes reserved.
Available downloads

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Experience perfection in grooming with Aesculap clippers - your partner for professional grooming since 1912. Aesculap stands for outstanding German quality and offers a wide product range for every requirement. Cordless clippers and trimmers allow maximum flexibility for detailed clipping, while hybrid machines offer the choice between mains and battery operation. The machines are powerful, smooth-running and ideal for everyday use. Perfect for pets and farm animals, they offer reliable and stress-free shearing with stable performance and low noise. Original Aesculap shaving heads guarantee recognized quality for professional results. Choose Aesculap and trust in over 100 years of precision and longevity.

Manufacturer information

Responsible person

Aesculap

    Choose accessories

    Precision Adjusting Aid Torqui for Cattle/Horse Clippers
    Precision Adjusting Aid Torqui for Cattle/Horse Clippers
    Torqui Precision Adjusting Aid for Cattle/Horse Clippers The clipping plate pressure of Aesculap cattle/horse clippers is child's play to adjust with this innovative "torque key".* Torqui at a glance: precise basic adjustment of the plate pressure increased shearing plate life thanks to longer intervals between regrinding consistent edge-retention easy to handle no prior knowledge needed small, easy to handle, maintenance-free precision instrument engineered in Germany  suitable for all Bonum and Econom cattle and horse clippers

    €57.99*
    Aesculap clipper wall holder
    Aesculap clipper wall holder
    Aesculap Wall holder for animal hair clippers - universal clipper holder Suitable holders for the electric hair clippers for screwing on vertical surfaces. The Aesculap wall holder is ideal for all professional dog groomers or veterinarians and order lovers. With this universal clipper holder your pet hair clipper is perfectly supplied. Simply mount it vertically on a wall with two screws. Suitable for cable-bound clippers. In 1912, the invention of the first electrically operated hair clippers was another milestone in the success story of Aesculap. As a premium brand in the field of clippers and hair care, we are aware of our responsibility towards professional and private users regarding consistently high quality! At present, shearing machines from Aesculap can be found in approx. 80% of professional dog grooming salons and in over 90% of all veterinary practices in Germany.

    €31.99*
    Aesculap Cutting head stand
    Aesculap Cutting head stand
    Aesculap Cutting head stand Shearing head cassette for storing 5 cutting heads within easy reach. The Aesculap shaving head stand is ideal for storing up to 5 cutting heads practically and safely. With the plastic stand you will always find the right shaving head for your shaving machine. The cutting set cassette is made of red plastic and fits all Aesculap shearing heads.

    €22.99*
    Aesculap Shearing machine oil 90 ml
    Aesculap Shearing machine oil 90 ml
    Aesculap Shearing machine oil 90ml The special oil for all Aesculap shearing machines, is suitable for all moving parts on and in the shearing head. The shearing machine oil ensures optimum lubrication of all moving parts in the shearing head. The oil is also excellently suitable for all common brand shearing machines. At a glance: does not resinify and does not stick together also suitable for all common shearing machine models Content: 90 ml Scope of delivery: 1x Aesculap Shearing machine oil 90ml

    Content: 0.09 Litre (€103.22* / 1 Litre)

    €9.29*
    Aesculap Clipper Blade Econom GT501 Upper blade 15 teeth
    Aesculap Clipper Blade Econom GT501 Upper blade 15 teeth
    Size: GT501 Upper blade 15 teeth
    Aesculap Clipper Blade Econom High quality shearing blades for shearing cattle, horses and sheep. 100% Made in Germany. The Aesculap Econom shearing blades are available for horse and cattle shearing, as well as for sheep shearing. The blades are suitable for the Shearing machines Econom, II, CL, NOVA, Equipe and Bonum. Due to the production from special Aesculap-Carbon-Steel the cutting inserts have a significantly higher cutting capacity than conventional cutting sets. The good processing quality of the Aesculap CNC machining centers guarantees a consistently high quality. The top and bottom plates of the Aesculap shear heads are milled and profile ground. The high-end surface finishing provides a high level of corrosion protection. This makes the cutting sets very durable, can be ground several times and optimally suited for professional use in agriculture. Care instructions: To ensure optimum life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Long cutting ability Cutting surfaces can be reground very often High processing quality due to Aesculap CNC machining centers All parts are milled and profile ground Resistant high-end surface finishing High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Horse and Cattle Clipper Aesculap Econom II Cattle Clipper Aesculap Econom II Sheep Clipper Aesculap Econom CL Cattle Clipper Aesculap Econom CL Fitter Cattle Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom Equipe Horse Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Aesculap Bonum Cattle Clipper Aesculap Bonum Horse Clipper Cutting length: GT501 Upper blade (15 teeth) cattle and horses, normal equipment GT502 Bottom blade (31 teeth), 3 mm cattle and horses, standard equipment GT503 Upper blade (17 teeth) cattle, sheep, fine wool sheep GT504 Bottom blade (18 teeth), 3 mm cattle, sheep, fine-wooled sheep GT505 Upper blade (23 teeth) horses and cattle GT506 Bottom blade (23 teeth), 3 mm cattle, dogs, goats GT508 Bottom blade (51 teeth), 0,1 mm horses, cattle (udder shearing) and industrial shearing GT511 Bottom blade (31 teeth), 1 mm horses and cattle. for very fine smooth shearing GT510 Bottom blade (24 teeth), 5 mm dogs, goats and Cushing's syndrome (horses)

    €28.99*
    Aesculap Clipper Blade Econom GT502 Bottom blade 31 teeth, 3 mm
    Aesculap Clipper Blade Econom GT502 Bottom blade 31 teeth, 3 mm
    Size: GT502 Bottom blade 31 teeth, 3 mm
    Aesculap Clipper Blade Econom High quality shearing blades for shearing cattle, horses and sheep. 100% Made in Germany. The Aesculap Econom shearing blades are available for horse and cattle shearing, as well as for sheep shearing. The blades are suitable for the Shearing machines Econom, II, CL, NOVA, Equipe and Bonum. Due to the production from special Aesculap-Carbon-Steel the cutting inserts have a significantly higher cutting capacity than conventional cutting sets. The good processing quality of the Aesculap CNC machining centers guarantees a consistently high quality. The top and bottom plates of the Aesculap shear heads are milled and profile ground. The high-end surface finishing provides a high level of corrosion protection. This makes the cutting sets very durable, can be ground several times and optimally suited for professional use in agriculture. Care instructions: To ensure optimum life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Long cutting ability Cutting surfaces can be reground very often High processing quality due to Aesculap CNC machining centers All parts are milled and profile ground Resistant high-end surface finishing High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Horse and Cattle Clipper Aesculap Econom II Cattle Clipper Aesculap Econom II Sheep Clipper Aesculap Econom CL Cattle Clipper Aesculap Econom CL Fitter Cattle Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom Equipe Horse Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Aesculap Bonum Cattle Clipper Aesculap Bonum Horse Clipper Cutting length: GT501 Upper blade (15 teeth) cattle and horses, normal equipment GT502 Bottom blade (31 teeth), 3 mm cattle and horses, standard equipment GT503 Upper blade (17 teeth) cattle, sheep, fine wool sheep GT504 Bottom blade (18 teeth), 3 mm cattle, sheep, fine-wooled sheep GT505 Upper blade (23 teeth) horses and cattle GT506 Bottom blade (23 teeth), 3 mm cattle, dogs, goats GT508 Bottom blade (51 teeth), 0,1 mm horses, cattle (udder shearing) and industrial shearing GT511 Bottom blade (31 teeth), 1 mm horses and cattle. for very fine smooth shearing GT510 Bottom blade (24 teeth), 5 mm dogs, goats and Cushing's syndrome (horses)

    Variants from €28.99*
    €35.99*