Kerbl Heated Float Drinking Bowl SH30, Frost-Resistant, without Rohrbegleitheizung 31W 230V

Frost-protection heating cable with thermostat 230 VThis frost-protection heating cable with thermostat keeps your water pipe frost-free down to max. -45°C, so drinking bowls and supply pipes keep working right through winter. As a pipe trace heating cable, it reliably prevents water pipes from freezing and protects you from costly frost damage.The built-in thermostat automatically switches the cable on at approx. +3°C and off again at approx. +13°C, so there's no need for manual monitoring. The cable is designed for heating the branch pipe of drinking troughs and is not suitable for central heating pipes. In areas animals can reach, fit an additional bite guard. If you add extra insulation around the pipe, do not insulate the thermostat itself, so it can measure the temperature accurately.Overview:Prevents water pipes from freezingIntegrated thermostat switches the cable on and off automaticallyIdeal for heating the branch pipe of drinking troughsKeeps water pipes frost-free down to max. -45°CPlug-and-play, connects to a power supply with RCD (30 mA)High protection rating IPX7 for damp stable environmentsVDE tested (except the 49 m version)Technical details:Voltage: 230 VSwitch-on temperature: approx. +3°CSwitch-off temperature: approx. +13°CProtection rating: IPX7Connection cable length: 2 mMechanical strength class M1 (not suitable for gutters or mechanically stressed applications)Maximum bending radius: approx. 50 mmMinimum insulation of pipe and cable: 13 mmDelivery contents:1x frost-protection heating cable with thermostat, 230 VFAQ:Can I shorten the cable if I need a shorter length?No, the heating cable must never be shortened. Order the correct length in advance; any excess length can be wound in loops around the pipe.Is the cable suitable for areas animals can bite?No, never fit a 230V cable unprotected where animals can reach it. Use only 24-volt heating cables there or fit an additional bite guard.Does the thermostat need to be insulated too?No, if you insulate the pipe further, only insulate the thermostat moderately or not at all so it can measure the temperature correctly.Length & Power Consumption:1 m, 16 W at 0 °C2 m, 32 W at 0 °C4 m, 64 W at 0 °C8 m, 128 W at 0 °C12 m, 192 W at 0 °C14 m, 224 W at 0 °C18 m, 288 W at 0 °C24 m, 384 W at 0 °C37 m, 592 W at 0 °C49 m, 784 W at 0 °CDo not install unprotected within reach of animals' teeth – use only 24-volt heating cable here! The heating cable must not be shortened!

Pipe Mounting Bracket for Secure Water Bowl Installation The pipe mounting bracket from Kerbl lets you fix your water bowl directly and firmly to a pipe – a practical solution when wall mounting isn't an option. Made from enamelled cast iron, the bracket is built to withstand daily use in the barn or field. Thanks to the screws of three different lengths included in the package, the bracket fits pipes with a diameter of 30 to 120 mm. Nuts and washers are also supplied, so no extra hardware is needed for installation. The brackets are suitable for several Kerbl water bowls, including K75, S30, H10, HP20 and SH30. Overview: Secure attachment of water bowls directly to a pipe Ideal when wall mounting isn't possible Fits pipe diameters from 30 to 120 mm Sturdy enamelled cast iron construction Simple screw-on installation, no extra tools needed Compatible with several Kerbl water bowl models Technical Data: Material: enamelled cast iron Diameter range: 30–120 mm Dimensions: approx. 17 x 10.5 x 8.5 cm Weight: approx. 2.79 kg Sales unit: pair (2 brackets) Delivery: 2x mounting brackets4x screws, 120 mm4x screws, 80 mm4x screws, 50 mm4x washers4x stop nuts Questions & Answers: Which water bowls fit this bracket?It is suitable for Kerbl water bowls including K75, S30, H10, HP20 and SH30. What pipe diameter range does it cover?With the different screw lengths included, it fits pipes from 30 to 120 mm in diameter. Do I need extra mounting hardware?No, all required screws, nuts and washers are included in the delivery.

Low pressure float valve – reliable water supply for your drinker With this low pressure float valve you can easily convert your float drinker from high pressure to low pressure operation. This robust replacement valve from Kerbl ensures your livestock stay reliably supplied with fresh water even at low mains pressure. The 1/2 inch brass connection fits standard Kerbl drinkers and is simple to retrofit. It's also practical for use on field tanks or IBC containers: just connect the water hose and your animals have constant access to fresh water. The water flow of 4 litres per minute provides reliable supply in the barn and on pasture. Overview: Float valve for low pressure connection Easy conversion from high pressure to low pressure drinkers Robust 1/2" brass connection Fits numerous Kerbl drinker models Also suitable for field tanks and IBC containers Simple installation without special tools Technical data: Water flow: 4 litres/min Connection: 1/2" brass Dimensions: approx. 20 x 8.5 x 5 cm Weight: approx. 222 g Suitable for the models: S30 S190 S195 S1090 SH30 Drinking trough with float valve Delivery contents: 1x low pressure float valve Questions & Answers: Does the valve also fit older Kerbl drinkers?The valve is designed for the listed models S30, S190, S195, S1090, SH30 and drinking troughs with float valve. For other models, check the connection dimensions first. Can I use the valve on a field tank?Yes, the float valve is also suitable for converting field tanks or IBC containers to low pressure operation. What is the maximum water flow?The water flow is up to 4 litres per minute.

Reliable Water Refill: Kerbl High Pressure Replacement Float ValveThe high pressure replacement float valve from Kerbl keeps your float drinking bowl topped up automatically. It's a straightforward swap for a worn or faulty valve, restoring full function to your drinking trough without hassle.The durable 1/2" brass connection gives a long-lasting fit to the high pressure water line. At 2 to 3 bar, the valve delivers a water flow of 7.5 litres per minute, refilling the bowl reliably whenever the water level drops – no manual topping up needed on the yard.Overview:Automatic water refill via float mechanismExact replacement for several Kerbl drinking bowl modelsDurable 1/2" brass connection for high pressure useConsistent water flow of 7.5 l/min at 2-3 barQuick, tool-light swap on your existing bowlTechnical Data:Connection: 1/2" brassWater flow: 7.5 l/min at 2-3 barDimensions: approx. 20.5 x 7.5 x 4.5 cmWeight: approx. 0.22 kgSuitable for: S30, S190, S195, S1090, SH30, drinking trough with float valveDelivery:1x high pressure float valveFAQ:Which drinking bowls does this valve fit?It fits the Kerbl models S30, S190, S195, S1090, SH30 and the drinking trough with float valve.Can I use this valve for low pressure systems?No, this valve is designed for high pressure connections only. A separate low pressure valve is available.How is the valve fitted?Simply unscrew the old, worn valve and fit this one in its place, then reconnect the water supply.