Heatable float drinking bowl SH30 31W without auxiliary pipe heating 230 V

Frost protection heating cable with thermostat 230 V Antifreeze heating pipe allows the water to flow in the winter. This antifreeze heating cable with thermostat keeps your water pipe up to max. -45 ° C frost-free. This heating pipe for watering bowls prevents the formation of birds. Protect the area that the animals can nibble on with an additional protection against the bite! This heating cable has an integrated frost protection thermostat (switch-on temperature approx. +5 ° C, switch-off temperature approx. +13 ° C) and is not suitable for heating pipes. For additional insulation do not insulate the thermostat! Overview of frost protection heating cable: Prevent freezing of water piping Thermostat in the heating cable switches on the cable automatically For heating the stub of drinking bowls keeps your water line frost-free to -45 °C  integrated frost-protection thermostat (switch-on temperature approx. +5 °C, switch-off temperature approx. +13 °C)  do not use on heating pipes when insulated additionally, please do not insulate the thermostat Do not mount where animals can reach!  IPX7 VDE tested What should be considered with 230 V heating cables: Always install the heating cable at the bottom of the pipe Water pipe must be earthed 230 V heating cables are ready to plug in and connect to a power supply with circuit breaker (RCCB 30 mA) Heating cables must not be shortened, already ordered in the correct length Rest lengths can be wrapped in turns around the pipe Do not bend the heating cable and set the max. Note bending radius of approx. 50 mm Heating cables can be attached to the pipe with insulating tape or with aluminum tape When used on plastic pipes, the pipe must be wrapped with aluminum tape before laying the heating cable Insulate the pipeline and the heating cable with insulation of min. 13 mm Install the thermostat of the heating cable in the coldest position of the pipe Thermostat may only be moderately insulated Do not use 230V heating cables in the biting area of ??animals Installation must be carried out in accordance with VDE0100 by a qualified specialist Do not mount unprotected in the bite area of ??animals - use only 24 volt heating cables! Heating cable must not be shortened! Length: 1 m, Watt at 0 ° C = 16 W 2 m, watts at 0 ° C = 32 W 4 m, Watt at 0 ° C = 64 W 8 m, watts at 0 ° C = 128 W. 12 m, Watt at 0 ° C = 192 W 14 m, Watt at 0 ° C = 224 W 18 m, Watt at 0 ° C = 288 W 24 m, Watt at 0 ° C = 384 W 37 m, watts at 0 ° C = 592 W. 49 m, watts at 0 ° C = 784 W. Delivery: 1x frost protection heating cable with thermostat, 230 V

Pipe mounting bracket, in pairs - for Kerbl water bowls With the mounting bracket, the potions can be attached directly to the pipe! The drinking basin can be attached directly to the pipe with the mounting brackets. Due to the different screws included in the scope of supply, the drinking bowl can be attached to pipes with a diameter of 30 to 120 mm. The required nut and washers are included. Overview: mounting bracket, 2 pieces cast iron, enamelled suitable for Kerbl potions diameter from 30 to 120 mm easy screw mounting Delivery: 2x mounting bracket 4x screws, 120 mm 4x screws, 80 mm 4x screws, 50 mm 4x washers 4x stop nuts

Replacement float valve - for conversion to low pressure Overview: float valve for low pressure connection 1/2 "brass connection water flow 4 liters / min Suitable for the models: S30 S190 S195 S1090 SH30 Drinking trough with float valve Delivery:1x float valve low pressure

Replacement float valve high pressure - for Kerbl float bowls Overview: float valve for high pressure connection 1/2" brass connection water flow 7.5 liters / min at 2 - 3 bar Suitable for the models: S30 S190 S195 S1090 SH30 Drinking trough with float valve Delivery: 1x float valve high pressure