%
Frost-protection heating cable with thermostat 230V 24 m €65.99* €69.99* (5.72% saved)
Size: 24 m
Frost protection heating cable with thermostat 230 V Antifreeze heating pipe allows the water to flow in the winter. This antifreeze heating cable with thermostat keeps your water pipe up to max. -45 ° C frost-free. This heating pipe for watering bowls prevents the formation of birds. Protect the area that the animals can nibble on with an additional protection against the bite! This heating cable has an integrated frost protection thermostat (switch-on temperature approx. +5 ° C, switch-off temperature approx. +13 ° C) and is not suitable for heating pipes. For additional insulation do not insulate the thermostat! Overview of frost protection heating cable: Prevent freezing of water piping Thermostat in the heating cable switches on the cable automatically For heating the stub of drinking bowls keeps your water line frost-free to -45 °C integrated frost-protection thermostat (switch-on temperature approx. +5 °C, switch-off temperature approx. +13 °C) do not use on heating pipes when insulated additionally, please do not insulate the thermostat Do not mount where animals can reach! IPX7 VDE tested What should be considered with 230 V heating cables: Always install the heating cable at the bottom of the pipe Water pipe must be earthed 230 V heating cables are ready to plug in and connect to a power supply with circuit breaker (RCCB 30 mA) Heating cables must not be shortened, already ordered in the correct length Rest lengths can be wrapped in turns around the pipe Do not bend the heating cable and set the max. Note bending radius of approx. 50 mm Heating cables can be attached to the pipe with insulating tape or with aluminum tape When used on plastic pipes, the pipe must be wrapped with aluminum tape before laying the heating cable Insulate the pipeline and the heating cable with insulation of min. 13 mm Install the thermostat of the heating cable in the coldest position of the pipe Thermostat may only be moderately insulated Do not use 230V heating cables in the biting area of ??animals Installation must be carried out in accordance with VDE0100 by a qualified specialist Do not mount unprotected in the bite area of ??animals - use only 24 volt heating cables! Heating cable must not be shortened! Length: 1 m, Watt at 0 ° C = 16 W 2 m, watts at 0 ° C = 32 W 4 m, Watt at 0 ° C = 64 W 8 m, watts at 0 ° C = 128 W. 12 m, Watt at 0 ° C = 192 W 14 m, Watt at 0 ° C = 224 W 18 m, Watt at 0 ° C = 288 W 24 m, Watt at 0 ° C = 384 W 37 m, watts at 0 ° C = 592 W. 49 m, watts at 0 ° C = 784 W. Delivery: 1x frost protection heating cable with thermostat, 230 V
Content: 24 Meter (€2.75* / 1 Meter)
Variants from €19.99*
Transformer for trough heating
Transformer for trough heating This transformer for trough heating transforms the voltage from 230 volts to 24 volts. These transformers are suitable for all frost-free water bowls and convert the voltage from 230 volts to 24 volts. The transformer for the trough heater is suitable for all frost-free drinking bowls. Short-circuit and overload protection, as well as an integrated temperature limiter are just a few advantages of the transformer. In order to avoid unnecessary retrofitting of your transformers, it is necessary to act proactively when buying. The number and power consumption of the planned heated drinkers and heating cables should be taken into account. Overview: Short-circuit and overload protection by easily replaceable motor vehicle fuse in the output circuit Suitable for all frost-free drinking bowls The transformers are additionally protected against overheating by an integrated temperature limiter (automatic reset after cooling) IP 65 (transformer) / IP 20 (connection) Which transformer is to be chosen? If you want to operate a drinking bowl with 80 W power (P), a transformer with 100 W is sufficient. If you also want to connect a heating cable with 24 V, you simply add the power consumption (= wattage) of the cable. Also consider the loss of power due to supply lines (see calculation example). This gives you the required minimum power of the transformer. Do not measure the transformer too precisely to have a buffer for extensions. Calculation example for transformer: 5 x drinking bowls with power consumption 100 watts = 500 watts 4 x frost protection heating cable 24 V each with 30 watts = 120 watts 1 x antifreeze heating cable 24 V each 15 watts = 15 watts = Total power consumption 635 watts Consideration of line losses (flat rate 15%) 635 watts x 1.15 = 730 watts In this example, two transformers with 400 watts each should be selected. Models: Transformer 100 VA Transformer 200 VA Transformer 300 VA Transformer 400 VA Delivery: 1x transformer for trough heating
From €83.99*
Protection Bracket for Water Bowls S
Size: S
Protective bracket for drinking bowls - Robust impact protection for your drinking bowl The protective bracket made of hot-dip galvanised steel not only protects the drinking bowl from damage, but also your animals from injury! With the protective bracket made of hot-dip galvanised steel tubing, your drinking trough is optimally protected against knocks and kicks. This increases the service life of the drinking trough many times over. The bracket also protects the animals, as the impact protection prevents injuries to the (possibly already damaged) drinking trough. The bracket can be screwed directly to the wall, is available in three sizes and is therefore suitable for various tube valve, tongue valve & float valve drinkers. At a glance: Prevents damage to the drinking bowl protects the animals from injuries Protection bracket made of hot-dip galvanised steel tube Available in 3 sizes for different drinkers Long-lasting and robust impact protection Easy to mount on the wall Size S: Width: 24 cm Depth: 30 cm Height incl. mounting plate: 20 cm Suitable for these Kerbl drinking bowls: 22360, 22375, 22378, 22465, 22466, 22500, 22504, 221000, 221851, 221500, 221600, 221853, 221870, 221871, 221874, 222000, 222005, 222010, 222020, 222030, 222500, 222709 Size M: Width: 29 cm Depth: 34 cm Height incl. mounting plate: 20 cm Suitable for these Kerbl drinking bowls: 221860, 2218605, 221875, 221876, 222040, 222045, 222050, 222055, 22445, 22355, 225030, 225031, 225032, 225033, 225035, 222070, 222062, 222063, 222064, 222065 Size L: Width: 41 cm Depth: 36.3 cm Height incl. mounting plates: 22 cm Suitable for these Kerbl drinking bowls: 222070, 222062, 222063, 222064, 222065, 22195 Scope of delivery: 1x Protective bracket for drinking bowls made of hot-dip galvanised steel Screws not included in delivery
€31.99*
Aluminium foil 100 m x 5 cm
Length: 100 m Width: 50 mm to reflect the heat on water pipes for a 3/4“ pipe of 3.5 m length approx. 25 m of aluminium tape is necessary
€13.99*
4x Nipple Drinker for Poultry
Nipple drinker for poultry The clean and vermin-free solution for water supply in the chicken house! A nipple drinker is an ideal and and very clean water supply for chicks, pullets, laying hens, broilers and of course for other poultry species such as turkeys, quails etc. especially if you keep several animals, a nipple drinker saves time and money. The nipple can be quickly and easily mounted on any water container with max. 1 cm wall thickness. It is only a small hole of Ø 10 mm required and the nipple sits firmly and tightly to the canister. Compared to conventional poultry drinkers have nipple drinkers a decisive advantage: Your chickens have always clean water because dirt cannot contaminate the water thanks to the closed canister. In addition no vermin penetrate, so that the risk of disease is minimized. You can also choose the size of the drinker flexibel, a nipple drinker is optimal for 4 to 5 chickens. Your chickens will soon understand how it works. It often takes only a few days for the poultry to get used to the drinker. The drinker can be placed both indoors and outdoors. If you switch from a conventional drinker to a nipple drinker, check regularly that all chickens are drinking enough. At a glance: Clean water without bugs and dirt For chickens of all ages and many types of poultry Optimally suitable for 4 - 5 chickens per nipple drinker Mounting on water containers with max. 1 cm wall thickness Small hole of Ø 10 mm required Drinker sits tightly and firmly on the canister thanks to O-ring For indoor as well as outdoor use Durable and robust, with stainless steel pin Dimensions (l x w x h): 33 x 30 x 34 mm Scope of delivery: 4x Nipple drinker for poultry
Content: 4 Piece (€2.75* / 1 Piece)
€10.99*
Stand for Water Bowls 30 x 40 cm
Stand for drinking bowls 30x40cm The practical increase for your heatable potions. The heated drinking bowls with valve tongue (Stalcho) or float valve (Lakcho) can thus be attached increased. The electrically heated drinking bowl provides your animals daily in the winter with fresh water. Overview: made of high quality polyethylene (PE) for screwing or setting in concrete suitable for heatable drinking bowls STALCHO and LAKCHO Delivery: 1x stand for water bowl 30x40 cm
€162.99*
5x Spacer for Heating cable incl. 10 cable ties
5x Spacer for Heating cable incl. 10 cable ties The heating cable must not touch, cross or overlap itself or another heating cable at any point. To permanently prevent contact, these 5 spacers are ideal. The spacers ensure that the heating cable is guided safely without any points of contact. The spacers are very easy to mount with the 10 cable ties. Thanks to the holes in the spacers, the heating cable is fixed and cannot slip. At a glance: Guarantees secure guidance of the heating cable Prevents the heating cable from touching For heating cables, frost protection cables of all kinds (like item no. 26592) 10 Pieces of cable ties enable easy mounting Scope of delivery: 5x Spacer for Heating cable incl. 10 cable ties
€4.49*
Stand for Water Bowls 30 x 100 cm
Stand for drinking bowls 30x100cm The practical increase for your heatable potions. The heated drinking bowls with valve tongue (Stalcho) or float valve (Lakcho) can thus be attached increased. As zusätliches detail of the base can be embedded in concrete to ensure a secure footing. The electrically heated drinking bowl provides your animals daily in the winter with fresh water. Overview: made of high quality polyethylene (PE) for screwing or setting in concrete suitable for heatable drinking bowls STALCHO and LAKCHO Delivery: 1x stand for water bowl 30x100cm
€288.99*
Stand for Water Bowls 30 x 60 cm
Stand for drinking bowls 30x60cm The practical increase for your heatable potions. The heated drinking bowls with valve tongue (Stalcho) or float valve (Lakcho) can thus be attached increased. The electrically heated drinking bowl provides your animals daily in the winter with fresh water. Overview: made of high quality polyethylene (PE) for screwing or setting in concrete suitable for heatable drinking bowls STALCHO and LAKCHO Delivery: 1x stand for water bowl 30x60 cm
€189.99*
Mounting brackets for water bowls, in pairs
Pipe mounting bracket, in pairs - for Kerbl water bowls With the mounting bracket, the potions can be attached directly to the pipe! The drinking basin can be attached directly to the pipe with the mounting brackets. Due to the different screws included in the scope of supply, the drinking bowl can be attached to pipes with a diameter of 30 to 120 mm. The required nut and washers are included. Overview: mounting bracket, 2 pieces cast iron, enamelled suitable for Kerbl potions diameter from 30 to 120 mm easy screw mounting Delivery: 2x mounting bracket 4x screws, 120 mm 4x screws, 80 mm 4x screws, 50 mm 4x washers 4x stop nuts
€24.99*
Browsing Protection for Pipelines
Browsing Protection for Pipelines - galvanised The Browsing Protection is a reliable protection for pipes fitted with heating cables and insulation. Overview: electroplated galvanised steel material thickness: 1 mm Size: 100 x 13,2 x 8 cm (L x W x H)
€21.99*
Spare valve brass for water bowl 221500, G16 & 222000
Spare valve made of brass - for water bowls G16, 221500 & 222000 With the replacement valve made of brass, your water bowl will be ready to use again in no time at all! Suitable for: Water bowl cast iron mod. 221500 Water bowl cast iron G16, enameled Water bowl cast iron mod. 222000 Delivery: 1x replacement valve made of brass
€5.99*
Mounting plate for water bowls G16, 221500 & 222000
Holding plate for water bowlThe metal support plate is suitable for the Kerbl water bowls G16, 221500 and 222000. Delivery: 1x holding plate for water bowls
€4.79*
24 V Frost-Protection Heating Cable
Frost protection heating cable 24 V - for heating spur pipes Overview: For heating the stubs of potions IPX7 protection class For retrofitting or replacement Note: 24 V transformer required Length: 1.5 m, 15 watts 3.0 m, 30 watts Delivery: 1x frost protection heating cable 24 V
Content: 1.5 Meter (€23.33* / 1 Meter)
From €34.99*
Mounting shackles for Water Bowls in pairs
The mounting shackles are suitable for the Kerbl water bowls.
€5.79*
High-pressure valve replacement for water bowls
High-pressure valve replacement for water bowls The replacement valve is suitable for the following water bowls: Water Bowl G20 Water Bowl K50 Water Bowl K71
€14.99*
Spare tube valve for water bowl G51
Spare tube valve for water bowl G51 Suitable spare tube valve for Kerbl water bowl G51. Delivery: 1x Spare tube valve for water bowl G51
€17.99*
Spare valve for water bowl E21
Spare valve for water bowl E21The spare valve is suitable for the Kerbl water bowl E21. Delivery:1x spare valve for Kerbl water bowl E21
€14.99*
Low-pressure valve replacement for water bowls
Low-pressure valve replacement for water bowlsThe low-pressure replacement valve is suitable for the following water bowls: Water Bowl K71 Water Bowl KN50
€12.99*
Connecting tube for drinking bowl stainless steel
straight design suitable for connecting drinking bowls 222620, 222621, 222622
From €10.99*
Drinking trough accessories - Optimal care for your animals
Discover our high-quality accessories for drinking troughs that allow you to provide your animals with optimal care. With our extensive range of drinking trough accessories, you can ensure that your animals always have enough fresh water available. Our drinking accessories offer functionality, durability and ease of use. Whether you are looking for heating cables, circulation systems, valves or spare parts - we have everything you need to keep your animal drinkers working optimally. Invest in high-quality accessories to ensure that your animals are always well cared for.
Heating cable - reliable frost protection solution
Our heating cables offer a reliable frost protection solution for your animal watering troughs. They ensure that the water does not freeze even at low temperatures and that your animals always have access to fresh water. Our heating cables are easy to install and provide safe and efficient heating for the drinkers. Choose the right heating cable for your animal drinkers from a range of lengths and models and ensure that your animals are optimally supplied with water even in the cold season.
Circulation systems - efficient water circulation
Our circulation systems ensure efficient water circulation in your animal drinkers. They ensure that the water always stays fresh and contamination is avoided. Our circulation systems are easy to install and offer a reliable solution for supplying water to your animals. Choose the right circulation system for your animal drinkers from a range of models and capacities and ensure a continuous supply of fresh water.
Valves and spare parts - reliable function and easy maintenance
Our valves and spare parts ensure that your animal drinkers function reliably and are easy to maintain. The valves ensure a controlled water supply and prevent contamination and flooding. Our spare parts enable quick repair and replacement of defective parts. With our valves and spare parts, you can ensure that your animal drinkers always work perfectly and that your animals receive the best possible care.
FAQ - Drinking trough accessories
FAQ - How do I install a heating cable for my pet drinker?
Installing a heating cable for your pet drinker is relatively simple. Make sure the heating cable is suitable for outdoor use and is the right length. Wrap the heating cable around the water tank or attach it along the water inlet. Make sure that the heating cable is firmly and securely fastened to avoid twisting or damage. Connect the heating cable to a suitable power source and regularly check the function and condition of the heating cable.
FAQ - Why is efficient water circulation in the animal drinker important?
Efficient water circulation in the drinker is important to ensure that the water remains fresh and contamination is avoided. Continuous water movement reduces deposits and bacterial growth. This contributes to the health and hygiene of your animals. In addition, the circulation enriches the water with oxygen, which improves the taste and quality. Ensure regular cleaning and maintenance of the circulation systems to guarantee optimum water circulation.
FAQ - How often should the valves and spare parts of my pet drinkers be serviced?
The valves and spare parts of your animal drinkers should be serviced regularly to ensure proper functioning. Check the valves regularly for wear or clogging
Zubehör Tränke - Für die optimale Versorgung deiner Tiere
Mit unserem umfangreichen Sortiment an Zubehör Tränke stellst du sicher, dass deine Tiere stets optimal mit frischem Wasser versorgt sind. Hochwertige Heizkabel verhindern das Einfrieren des Wassers, während effiziente Umlaufsysteme für eine kontinuierliche Frische sorgen. Robuste Ventile und Ersatzteile garantieren eine zuverlässige Funktion und einfache Wartung deiner Tränken. Alle Produkte sind einfach zu montieren und bieten langlebige Qualität. Investiere in die beste Ausstattung, um die Gesundheit und das Wohlbefinden deiner Tiere zu gewährleisten.
Entdecke jetzt das passende Zubehör Tränke und sorge dafür, dass deine Tiere immer bestens versorgt sind.