✂️ Buy cattle clippers with cable - Efficient clipping

- the tried-and-tested motor technology gives the constanta4 tremendous tractive power - even on matted and dirt-encrusted animals the constanta4 does not "yield" - the new Supra blades glide through the most difficult of coats without loss of power - supplied in a sturdy carrrying case together with accessories

Agrarzone Shearing machine PowerCut Horse / Cattle The Agrarzone Shearing machine PowerCut is the perfect all-rounder among the animal shearing machines and is perfectly suitable for the clipping of horses or cattle. With the new Agrarzone Shearing machine PowerCut you can shear horses or cattle precisely and quickly. The powerful 200 watt motor with 3000 double strokes per minute achieves an extraordinarily high penetration force. The cattle and horse clipper is operated with mains power and offers sufficient room to move thanks to a 3 metre long mains cable. It is ergonomically shaped and thus lies securely in the hand. At 1190 g, the PowerCut is very light, and the optimally thought-out weight distribution enables low-fatigue work. The robust housing promises a long service life and optimal working conditions. The Supra shear blade set included in the scope of delivery is made of high-quality stainless steel. Thanks to the hollow grind and the blade geometry, the blades glide easily through the coat, even with very thick or dirty coats the machine has no difficulties. Important: For a long life of your clipper, oil the machine with clipper oil before, during and after clipping. Overview: Universal clipper for horses and cattle Also suitable for heavily soiled or matted coats Powerful motor with 200 watts DC Particularly quiet operation Optimal weight distribution for fatigue-free work Attractive, ergonomic design Slide switch for easy on/off operation Large range of motion due to 3 m mains cable High quality workmanship & long service life Incl. Supra stainless steel clipper blade set 31/15 teeth Technical data: Mode of operation: Mains Voltage: 220 V - 240 V AC Drive: DC Motor Motor power: 200 W DC Mains frequency: 50 / 60 Hz Cutting speed: 3000 double strokes/min Sound pressure level: 85 dB (A) Tooths lower / upper blade: 31 / 15 Dimensions: 29,5 x 8 x 6,2 cm Weight: 1190 g (without cable) Length of mains cable: 3 m  Scope of delivery: 1x Agrarzone Shearing machine PowerCut horse / cattle 1x Supra clipper blade set 1x Hard shell storage case 1x Screwdriver 1x Instruction Manual

Heiniger XPERIENCE 2-SPEED Cattle and horse clipper The new, further developed clipper XPERIENCE 2-SPEED from Heiniger convinces with 2 speed levels and is wonderfully suitable for the whole body clipping of cattle & horses. The XPERIENCE cattle & horse clipper is the tried and tested classic from Heiniger that has been popular for years, but the clipper is now available with two speed settings. This powerful 2-SPEED animal hair clipper inspires people and animals with its state-of-the-art technology. The powerful 250 W motor delivers a high output of 2.600 or 2.900 double strokes per minute, making the trimmer ideal for full-body clipping of horses or cattle. A special feature of the corded clipper is its ergonomic design. The lightweight, slim and handy animal hair trimmer prevents early wrist fatigue thanks to its optimally balanced housing. The lightweight also impresses with its extremely robust and durable construction. Thanks to the worldwide unique connection between the shaving head and the glass-fibre reinforced housing, the XPERIENCE 2-SPEED pet hair clipper is extremely low in vibration, which is particularly beneficial for sensitive or nervous animals. The 21/23 clipper blade set included in the complete package is made of high-quality steel and, with its cutting length of 2 to 4 mm, is ideal for precise clipping work. Together with the care utensils for easy cleaning of the clipper and clipper blade, the scope of delivery also includes a practical carrying case in which the trimmer and accessories can be stored and transported easily. At a glance: For full body clipping of horses & cattle Powerful 250 W motor with 2 speed settings Also suitable for sensitive, nervous animals Lightweight, optimally balanced and quiet Includes 21 / 23 clipper blades for 2 to 4 mm coat length Extremely low vibration for fatigue-free clipping Swiss quality product! Technical data: Mode of operation: Mains Voltage: 230 V Motor power: 250 W Cutting speed: 2.600 / 2.900 Double strokes/min Sound pressure level: 68 dB Mains cable length: approx. 5 m Dimensions (LxØ): ca. 30,1 cm x Ø 54 mm Shearing blade: Upper blade 23 teeth / Lower blade 21 teeth Shearing blade width: 78 - 80 mm Weight: 1180 g Colour: black Scope of delivery: 1x Heiniger XPERIENCE 2-SPEED Cattle and horse clipper 1x Pair of shearing blades 21 / 23 1x Special screwdriver 1x Instruction manual 1x Storage case 1x Cleaning brush 1x Clipper oil

Kerbl Shearing machine FarmClipper4 The Kerblclipper FarmClipper4 is the perfect all-rounder among the animal clippers and is suitable for cattle and horses.The shearing machine is mains-operated and offers enough room to move with the 3 menter long power cable. The powerful 200 watt motor has an exceptional power output of 3,000 double strokes/minute, while the noise level in operation is 85 db, which is lower than other machines. The shearing machine is ergonomically shaped and therefore lies safely in the hand, with 1190g the machine is very light in comparison to other large animal shearing machines. The robust housing promises a long service life.The Supra shearing blades are made of high quality stainless steel, thanks to the hollow grinding and the blade geometry the blades glide easily through the fur, even with very dense or dirty fur the machine has no problems At a glance: Universal clipper for cattle and horses Powerful motor with 200 watt dc Optimum weight distribution for fatigue-free work Attractive, ergonomic design Incl. Supra shear blade set 31/15 teeth 3 m long cable Very quiet Technical data: Supply voltage: 220 - 240 v ac / 50 Hz Motor power: 200 w dc = 400 w ac Weight without cable: 1190 g Sound pressure level: 85 dB (A) Cutting speed: 3.000 double strokes/min. Scope of delivery:1x KerblFarmClipper41x Supra shear blade set1x plastic case1x scissor puller1x instruction manual

TailWell2 Power Tail Trimmer Standard - the practical Cow Tail Trimmer With the TailWell no pre-cutting is necessary even with heavy soiling! The Tailwell 2 Tail Trimmer Standard is the logical further development of the successful model from New Zealand. The Tailwell 2 was developed to ease the tedious work of cow tail hair trimming in dairy cows. Removing cow tail hair contaminated with feces and urine is important for optimal hygiene of the herd, the milk and the milker. Pre-cutting of the hair is not necessary, even with heavy soiling or incrustation. The TailWell 2 Standard works extremely quietly and needs only a few seconds per tail - ideal even during the milking process! For optimal milk quality, cow tail hair should be clipped twice a year. The TailWell 2 Power Tail Trimmer fits into any cordless trimmer (min. 14 volts) with approx. 1.250 rpm. It works quietly and produces a smooth haircut. It takes only max. 4 seconds per tail and can easily be done during the milking process. From the principle, an outer blade rotates around an inner one, so there is no risk of injury to animal or human. Regular lubrication, as with any shearing device, is important and should be done between every 30th to maximum 50th shearing. It should be possible to shear 100 to 200 tails per battery charge, depending on the degree of soiling. A regrinding of the blades is necessary depending on the degree of soiling (after 1000 to 2000 shearing) and can be done easily and without problems even by inexperienced users with the supplied grinding paste. Overview: Easy cow tail hair trimming for dairy cows Enables optimal hygiene of livestock, milk and milker No pre-cutting of hairs necessary even in case of heavy soiling or encrustation Smooth haircut in max. 4 seconds per tail Works quietly No risk of injury to animals or humans Powerful battery - up to 200 tail shaves per charge Grinding paste for easy, hassle-free resharpening of the blade For all cordless screwdrivers with at least 14 volts, 1.250 rpm Scope of delivery: 1x TailWell 2 Cow Tail Trimmer Standard 1x Grinding paste 1x Plastic storage case 1x Instruction manual and DVD Note: The cordless screwdriver is not included in the delivery.

TailWell2 Power Tail Trimmer Titanium - the practical Cow Tail Trimmer Now even more powerful: With the TailWell Titanium, even large herds or cow tails soiled with sand can be clipped. The Tailwell 2 Tail Trimmer is the logical further development of the successful model from New Zealand. The Tailwell 2 was developed to ease the tedious work of cow tail hair trimming in dairy cows. Removing cow tail hair contaminated with feces and urine is important for optimal hygiene of the herd, the milk and the milker. The Titanium version is characterized by extreme durability thanks to high quality titanium nitride coating of the blades. It is therefore particularly suitable for large herds or animals bedded on sand. Pre-cutting of the hair is not necessary, even in the case of heavy soiling or incrustation. The TailWell 2 Titanium works extremely quietly and requires only a few seconds per tail - ideal even during the milking process! For optimal milk quality, cow tail hair should be clipped twice a year. The TailWell 2 Power Tail Trimmer fits into any cordless trimmer (min. 14 volts) with approx. 1.250 rpm. It works quietly and produces a smooth haircut. It takes only max. 4 seconds per tail and can easily be done during the milking process. From the principle, an outer blade rotates around an inner one, so there is no risk of injury to animal or human. Regular lubrication, as with any shearing device, is important and should be done between every 30th to maximum 50th shearing. With the Tailwell 2 Tail Trimmer Titanium up to 3000 cows tails soiled with sand or up to 6000 lightly soiled cows tails can be sheared. Regrinding of the blades is necessary depending on the degree of soiling (after 1000 to 2000 shearing) and can be done easily and without problems even by inexperienced users with the supplied grinding paste. Overview: Easy cow tail hair trimming for dairy cows Particularly suitable for large herds or animals bedded on sand Enables optimal hygiene of herd, milk and milker No pre-cutting of the hair necessary even when heavily soiled or encrusted Smooth hair cut in max. 4 seconds per tail Extreme durability due to titanium nitride coating of the blades Works quietly No risk of injury to animals and humans Powerful battery For up to 3000 sand soiled / 6000 lightly soiled cow tails Grinding paste for easy, trouble-free regrinding of the blade For all cordless screwdrivers with at least 14 volts, 1.250 rpm Scope of delivery: 1x TailWell 2 Cow Tail Trimmer Titanium 1x Grinding paste 1x Plastic storage case 1x Instruction manual Note: The cordless screwdriver is not included in the delivery.

Aesculap Econom II Cattle clipper incl. clipper blades GT475 The Aesculap Econom II is a professional cattle clipper and is supplied with suitable clipper blades for cattle clipping. The Econom II clipper for cattle convinces with excellent shearing speed and high stroke rate. Thanks to the optimal traction and high motor power, you can shear your charges with consistent quality every time. The ergonomically designed housing has a balanced weight and enables low-fatigue shearing for everyone. With a length of 5 m, the power cord of the cattle clipper offers enough room to move around the animal. The clipper from Aesculap is designed to be extra service-friendly and therefore very easy to handle. The clipper blades are made of abrasion-resistant carbon steel and are particularly wear-resistant. The machine is supplied in a plastic case in which the clipper can be safely stored and transported. Overview: High shearing speed Excellent pulling power Ergonomic handling and weight balance Service & user-friendly Low heating thanks to high air flow rate Filter change without tools - easy carbon replacement - plug-in board Integrated start control and overload protection Uniform and long-lasting cutting Quality Shearing blades made of abrasion-resistant carbon steel Incl. original Aesculap shearing blade 18/17 teeth, shearing height 3 mm Technical data: Operating mode: 230 V Drive: DC Motor Gear: spur gear Power: 200 W Sound pressure level: approx. 73 dB Cutting speed: approx. 2.750 strokes/min Cable length: 5 m Weight: approx. 1.200 g (without cable) Shearing head system: Shearing blade set Lower / upper blade: 18/17 teeth Residual hair length: 3 mm Scope of delivery: 1x Aesculap Econom II Cattle clipper (GT474) 1x Lower blade 18 teeth / 3 mm (GT504) 1x Upper blade 17 teeth (GT503) 1x Aesculap Clipper oil (GT604) 1x Sturdy plastic case