Agrarzone PowerCut 230 V Horse and Cattle Clipper in a nutshell:


  • Universal clipper for horses and cattle
  • Also suitable for heavily soiled, matted coats
  • Powerful motor with 200 watts
  • Incl. Supra Clipper blade set 31/15 teeth made of stainless steel
  • Ergonomic design for fatigue-free work

Agrarzone Shearing machine PowerCut Horse / Cattle

The Agrarzone Shearing machine PowerCut is the perfect all-rounder among the animal shearing machines and is perfectly suitable for the clipping of horses or cattle.

With the new Agrarzone Shearing machine PowerCut you can shear horses or cattle precisely and quickly. The powerful 200 watt motor with 3000 double strokes per minute achieves an extraordinarily high penetration force.

The cattle and horse clipper is operated with mains power and offers sufficient room to move thanks to a 3 metre long mains cable. It is ergonomically shaped and thus lies securely in the hand. At 1190 g, the PowerCut is very light, and the optimally thought-out weight distribution enables low-fatigue work. The robust housing promises a long service life and optimal working conditions.

The Supra shear blade set included in the scope of delivery is made of high-quality stainless steel. Thanks to the hollow grind and the blade geometry, the blades glide easily through the coat, even with very thick or dirty coats the machine has no difficulties.

Important: For a long life of your clipper, oil the machine with clipper oil before, during and after clipping.

Overview:

  • Universal clipper for horses and cattle
  • Also suitable for heavily soiled or matted coats
  • Powerful motor with 200 watts DC
  • Particularly quiet operation
  • Optimal weight distribution for fatigue-free work
  • Attractive, ergonomic design
  • Slide switch for easy on/off operation
  • Large range of motion due to 3 m mains cable
  • High quality workmanship & long service life
  • Incl. Supra stainless steel clipper blade set 31/15 teeth

Technical data:

  • Mode of operation: Mains
  • Voltage: 220 V - 240 V AC
  • Drive: DC Motor
  • Motor power: 200 W DC
  • Mains frequency: 50 / 60 Hz
  • Cutting speed: 3000 double strokes/min
  • Sound pressure level: 85 dB (A)
  • Tooths lower / upper blade: 31 / 15
  • Dimensions: 29,5 x 8 x 6,2 cm
  • Weight: 1190 g (without cable)
  • Length of mains cable: 3 m

 Scope of delivery:

1x Agrarzone Shearing machine PowerCut horse / cattle
1x Supra clipper blade set
1x Hard shell storage case
1x Screwdriver
1x Instruction Manual

Manufacturer "Agrarzone"

Agrarzone - Agriculture with passion

Experience our huge range for farmers, riders and hobby farmers now on Agrarzone - our specialized web shop for Agriculture. Here you will find high-quality products relating to electric fences, animal husbandry, stables, farms and much More.

Dezibel: 85 dB
stroke rate: 3000 double strokes/min
Capacity: 200 W
Power source: Cord
Animal species: Cattle, Horse

1 of 1 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


23 March 2024 08:50

Super für ein Cushing-Pony mit sehr langem, dichtem Haar

Unsere wesentlich teurere Marken-Schermaschine hat bei unserem Cushing-Pony völlig versagt. Von von einer Fachfrau bei einem Schermesserschleifer und -Anbieter wurde mir gesagt, dass es bei Cushing-Ponys keine gut geeignete Pferdeschermaschine gäbe, ich solle auf eine Spezialmaschine für lockige Rinder ausweichen. Aber bei der Google-Suche mit Eingabe Cushing-Ponys wurde mir zum Glück diese preiswerte, robuste Schermaschine angezeigt, mit der ich unserem mittlerweile 30-jährigen Pony das Leben sehr erleichtern kann. Genügend Schermesser braucht man, mindestens einen weiteren Satz würde ich empfehlen. Super Produkt!

CoolSpray for clipping blades 500 ml
Kerbl CoolSpray for clipping blades 500 ml all-in-one cooling, lubrication and cleaning improves shearing results and keeps clipper blades sharp for longer removes hair and fur residue and dirt

Content: 0.5 Litre (€21.98* / 1 Litre)

€10.99*
Pcs.
Kerbl Shearing template for horses set of 3
Shearing template for horses - set of 3These beautiful stencils are versatile it can be shorn, brushed or sprayed. The material is high-quality plastic and can be wash up well. The set consists of heart, star and lily pattern.for shearing, brushing and sprayingmade of high-quality plasticreusable and washableScope of delivery:1x heart and star pattern in different sizes from 5 cm to 12 cm1x French Lillie 14 x 11cm and crown 14 cm1x heart 13 cm and star 13 cm

€15.99*
Pcs.
Kerbl Constanta Clipper oil 100 ml
Oil for clipping machines 100 ml ensures that all moving parts in the shaving head are properly lubricated it is also an excellent oil for all other trademark clippers on the market Size: 100 ml

Content: 0.1 Litre (€65.90* / 1 Litre)

€6.59*
Pcs.
Aesculap clipper wall holder
Aesculap Wall holder for animal hair clippers - universal clipper holder Suitable holders for the electric hair clippers for screwing on vertical surfaces. The Aesculap wall holder is ideal for all professional dog groomers or veterinarians and order lovers. With this universal clipper holder your pet hair clipper is perfectly supplied. Simply mount it vertically on a wall with two screws. Suitable for cable-bound clippers. In 1912, the invention of the first electrically operated hair clippers was another milestone in the success story of Aesculap. As a premium brand in the field of clippers and hair care, we are aware of our responsibility towards professional and private users regarding consistently high quality! At present, shearing machines from Aesculap can be found in approx. 80% of professional dog grooming salons and in over 90% of all veterinary practices in Germany.

€31.99*
Pcs.
Aesculap Clipper Blade Econom GT501 Upper blade 15 teeth
Size: GT501 Upper blade 15 teeth
Aesculap Clipper Blade Econom High quality shearing blades for shearing cattle, horses and sheep. 100% Made in Germany. The Aesculap Econom shearing blades are available for horse and cattle shearing, as well as for sheep shearing. The blades are suitable for the Shearing machines Econom, II, CL, NOVA, Equipe and Bonum. Due to the production from special Aesculap-Carbon-Steel the cutting inserts have a significantly higher cutting capacity than conventional cutting sets. The good processing quality of the Aesculap CNC machining centers guarantees a consistently high quality. The top and bottom plates of the Aesculap shear heads are milled and profile ground. The high-end surface finishing provides a high level of corrosion protection. This makes the cutting sets very durable, can be ground several times and optimally suited for professional use in agriculture. Care instructions: To ensure optimum life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Long cutting ability Cutting surfaces can be reground very often High processing quality due to Aesculap CNC machining centers All parts are milled and profile ground Resistant high-end surface finishing High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Horse and Cattle Clipper Aesculap Econom II Cattle Clipper Aesculap Econom II Sheep Clipper Aesculap Econom CL Cattle Clipper Aesculap Econom CL Fitter Cattle Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom Equipe Horse Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Aesculap Bonum Cattle Clipper Aesculap Bonum Horse Clipper Cutting length: GT501 Upper blade (15 teeth) cattle and horses, normal equipment GT502 Bottom blade (31 teeth), 3 mm cattle and horses, standard equipment GT503 Upper blade (17 teeth) cattle, sheep, fine wool sheep GT504 Bottom blade (18 teeth), 3 mm cattle, sheep, fine-wooled sheep GT505 Upper blade (23 teeth) horses and cattle GT506 Bottom blade (23 teeth), 3 mm cattle, dogs, goats GT508 Bottom blade (51 teeth), 0,1 mm horses, cattle (udder shearing) and industrial shearing GT511 Bottom blade (31 teeth), 1 mm horses and cattle. for very fine smooth shearing GT510 Bottom blade (24 teeth), 5 mm dogs, goats and Cushing's syndrome (horses)

€28.99*
Pcs.
Aesculap Clipper Blade Econom GT502 Bottom blade 31 teeth, 3 mm
Size: GT502 Bottom blade 31 teeth, 3 mm
Aesculap Clipper Blade Econom High quality shearing blades for shearing cattle, horses and sheep. 100% Made in Germany. The Aesculap Econom shearing blades are available for horse and cattle shearing, as well as for sheep shearing. The blades are suitable for the Shearing machines Econom, II, CL, NOVA, Equipe and Bonum. Due to the production from special Aesculap-Carbon-Steel the cutting inserts have a significantly higher cutting capacity than conventional cutting sets. The good processing quality of the Aesculap CNC machining centers guarantees a consistently high quality. The top and bottom plates of the Aesculap shear heads are milled and profile ground. The high-end surface finishing provides a high level of corrosion protection. This makes the cutting sets very durable, can be ground several times and optimally suited for professional use in agriculture. Care instructions: To ensure optimum life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Long cutting ability Cutting surfaces can be reground very often High processing quality due to Aesculap CNC machining centers All parts are milled and profile ground Resistant high-end surface finishing High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Horse and Cattle Clipper Aesculap Econom II Cattle Clipper Aesculap Econom II Sheep Clipper Aesculap Econom CL Cattle Clipper Aesculap Econom CL Fitter Cattle Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom Equipe Horse Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Aesculap Bonum Cattle Clipper Aesculap Bonum Horse Clipper Cutting length: GT501 Upper blade (15 teeth) cattle and horses, normal equipment GT502 Bottom blade (31 teeth), 3 mm cattle and horses, standard equipment GT503 Upper blade (17 teeth) cattle, sheep, fine wool sheep GT504 Bottom blade (18 teeth), 3 mm cattle, sheep, fine-wooled sheep GT505 Upper blade (23 teeth) horses and cattle GT506 Bottom blade (23 teeth), 3 mm cattle, dogs, goats GT508 Bottom blade (51 teeth), 0,1 mm horses, cattle (udder shearing) and industrial shearing GT511 Bottom blade (31 teeth), 1 mm horses and cattle. for very fine smooth shearing GT510 Bottom blade (24 teeth), 5 mm dogs, goats and Cushing's syndrome (horses)

Variants from €28.99*
€35.99*
Pcs.
Premium Clipper Blade Set for PowerCut, FarmClipper & Constanta 31/15 teeth
Size: 31/15 teeth
Shearing blade set Premium for PowerCut, Constanta, FarmClipper High quality shearing blade set made of selected tool steel for a clean shearing result. The Premium shearing blade set is suitable for many common shearing machines such as the Agrarzone Powercut, Kerbl FarmClipper, Kerbl Constanta and other common shearing machines from Heiniger, Aesculap & Liscup. The optimised blade geometry and the selected tool steel with special hardening ensure an exact cutting pattern and a long service life. Care instructions: To ensure the optimum life of the clipper blades, regular and correct care is important. Clean the cutting plates with a soft cloth or brush. Make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades must be oiled before each use with the shearing head mounted. During work, the clipper blades must be oiled every 5 - 10 minutes. After oiling, let the machine idle for a few seconds so that the oil can spread well and is not transferred to the animal's hair. With proper maintenance and care, the durability of the shaving heads can be increased by up to 20%. Regrinding can also be delayed. Overview: Shearing blades for PowerCut, Constanta, FarmClipper Also for common Heiniger & Aesculap clippers Selected tool steel with special hardening Optimised blade geometry For a clean & exact cutting pattern High quality workmanship Long service life Shearing type: 21/23 teeth for cattle all-round shearing 3 mm 18/17 teeth for cattle, fine-wooled sheep & noble sheep 3 mm 31/15 teeth for cattle / horses standard shearing 3 mm 31/23 teeth for udder shearing & industrial shearing 31/15 teeth for fine shearing close to the skin, for veterinarians Scope of delivery: 1x Shearing knife set Premium consisting of upper & lower knife

€52.99*
Pcs.