✂️ Buy clipping head for dogs

high wear protection and longer service life excellent gliding thanks to minimised frictional resistance extended edge retention increased corrosion protection reduced care requirement thanks to dirt-repellent surface

Clipper Blade Moser Max 45 / Moser Max 50 Precision ground cutting set from WAHL - High quality workmanship 100% made in Germany. The original Moser Snap-On Clipper head from WAHL is a precision ground full metal cutting set. The cutting set is "Made in Germany" and suitable for professional use as well as for the home user. The shearing head is made of high quality stainless steel by cross grinding and not punched. This manufacturing method gives the shearing head an extremely long service life. The grooved profile on the back ensures optimal cooling of the cutting set. The special shaving head geometry and the optimally adjusted cutting pressure ensure an exact cut. Thanks to the high quality of workmanship, the cutting set can be reground several times. The Moser replacement shear blades are compatible with all current brand-name devices that use a Snap On cutting set. The SnapON change system makes it easy to slide the shearing head on and off in seconds, without the use of tools. Care Tip: To ensure optimal life of the shaving head, regular and proper care is important. Clean the cutting plates with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil can be well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the shaving heads can be increased up to 20%. Also the regrinding can be delayed. Overview: For all shearing machines with SnapOn High processing quality Made of high quality stainless steel Very long cutting ability Multiple regrindable All parts are cross and profile ground Made in Germany Suitable among others for the following shearing machines: Moser Max 45 Moser Max 50 Oster Golden A5 Oster A6 Comfort Oster A6 Slim Oster Pro 3000i Oster PowerPro Ultra Oster Power Max Aesculap Durati Aesculap FAV5 Aesculap FAV5 CL Aesculap FAV5 Hybrid Aesculap Fortis Wahl Avalon Wahl KM2 Wahl KM5 Wahl KM10 Wahl KM Cordless Wahl KM Cordless Horse Kerbl Clipper PROFI More shearing machines with SnapOn Clipper Blades Cutting length: 1/10 mm, #40F for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, heavily tangled, matted, knotted 1/20 mm, #50F for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, strongly tangled, matted, knotted 1 mm, #30F (fine teeth) for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, strongly tangled, matted, knotted 2 mm, #10F (fine teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier, Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle / coat type: short, bristly, long, fine, with or without undercoat, strongly tangled 2,3 mm, #10W (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 3 mm, #8,5F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier, Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle / coat type: short, bristly, long, fine, with or without undercoat, strongly tangled 5 mm, #7F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 7 mm, #5F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 9 mm, #4F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat

Wahl Clipper Blade coarse KM1854-7351 for Arco, Adelar, Adore and more With the Wahl Clipper Blade "Made in Germany", professional shaving work can be easily implemented. The Wahl Clipper Blade coarse KM1854-7351 is made in Germany and perfectly suitable for the Moser Arco, Bravura, Wahl Adelar, Adore and many other clippers. The integrated cutting length adjustment allows a step adjustment of the cutting set from 0,7 to 3 mm. The original cutting set is precision-ground and made of high-quality stainless steel. This manufacturing method gives the shaving head an extremely long service life. The grooved profile on the back ensures optimal cooling of the cutting set. Thus, the cutting set glides easily through the coat and ensures a precise cut. Thanks to the high quality of workmanship, the clipper blade can be resharpened several times. Care instructions: To ensure the optimum life of the clipper head, regular and correct care is important. Clean the cutting plates with a soft cloth or brush. Make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades must be oiled before each use with the shearing head mounted. Oil every 5-10 minutes while working. After oiling, let the machine idle for a few seconds so that the oil can spread well and is not transferred to the animal's hair. With proper maintenance and care, the durability of the shaving heads can be increased by up to 20%. Regrinding can also be delayed. Overview: Specially designed for detail shearing and veterinary use High quality workmanship Made of high quality stainless steel Precision ground Extremely long life Multiple regrindable Cutting length 3-way adjustable from 0,7 - 3 mm Cutting width approx. 46 mm Suitable for the following clippers, among others: Moser Arco Moser Bravura Moser Chromstyle Wahl Adelar Wahl Adore Wahl Super Groom Ermila Bellina Genic Plus and many more Scope of delivery: 1x Wahl Clipper Blade coarse KM1854-7351

Moser Clipper Blade for Moser Prima The Moser Clipper Blade "Made in Germany" impresses with its high quality of workmanship. The shearing head is designed with a cutting length of 0,4 mm for the Clipper Moser Prima suitable. The original cutting set is precision ground and made of high quality stainless steel. This manufacturing method gives the shaving head an extremely long service life. The grooved profile on the back ensures optimum cooling of the cutting set. Thus, the cutting set glides easily through the fur and thus ensures a precise cut. Thanks to the high quality of workmanship the shearing blade can be resharpened several times. Care instructions: To ensure optimal life of the shaving head, regular and proper care is important. Clean the cutting plates with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil can be well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the shaving heads can be increased up to 20%. Also the regrinding can be delayed. Overview: High processing quality Made of high quality stainless steel Precision ground Extremely long service life Multiple regrindable Cutting length: approx. 0,4 mm Cutting width: approx. 32 mm Scope of delivery: 1x Moser Clipper Blade for Moser Prima 1590-7001

Clipster clipper head for Sonic / Onyx 0,8 -2,0 mm This shearing head is suitable for the AKKU shearing machine Onyx. With this sharp ceramic shearing head you will achieve an excellent shearing result for your dog or for detail work on your horse. With a small adjusting wheel the shearing head can be adjusted manually between 0.8 and 2 mm. The replacement shearing head therefore shears 0.8, 1.4 and 2.0 mm. Overview: excellent shearing properties Ceramic clipper head 5-step cutting height adjustment by means of adjusting wheel (0.8 - 2.0 mm)

Kerbl constanta ar2 shearing blade set - different sets for every kind of shearing The Kerbl shear blades are made of specially hardened steel alloy and are therefore extra durable and wear resistant. The newly developed teeth grinding and hollow grinding ensure an optimal shearing result for horse and cattle shearing. The shearing blades are suitable for constanta ar2, constanta1, constanta2 and shearing machine models from Lister-Liscop Kerbl constanta ar2 Shear blades at a glance: newly developed tooth grinding and hollow grinding for best clipping results specially hardened steel alloy for best service life and optimal grinding behaviour suitable for constanta ar2, constanta1, constanta2 and Lister-Liscop shearing machine models The knife sets are available in the following models: #60: Cutting length 3 mm, for slightly dirty animals, Normal shearing 18/24 teeth #70Cutting length 3 mm, for heavily soiled animals, fast shearing, Running stable chute 21/19 teeth #20Cut length 3 mm, for udder shearing, fine shearing, Horse harness 35/24 teeth #220Cutting length 0,5 mm, for close cropping 35/24 teeth

Wahl "A" Clipper Blade for Star, Liberty, Legend & Fusion Precision ground clipper heads with reduced heat for Star, Liberty, Legend and Fusion Clipper horse clippers. The Original Wahl "A" Series replacement blades are precision ground to fit the Wahl horse clippers Star, Liberty, Legend and Fusion Clipper. The shaving heads are not simply punched, but are given a precision grinding. This ensures a long service life (the grind is sharp for longer). The high-quality all-metal cutting sets have an optimum degree of hardness for a long service life. The ribbed back of the shaving head reduces heat generation at the shaving head. The blades release the heat generated more quickly, ensuring that the clipper head glides through the coat with ease. All Wahl shearing blades can be resharpened several times, and thanks to the Easy-Fit System system, all Wahl clipper blades can be resharpened several times. In addition to changing the clipper head, this also makes cleaning easier. Care instructions: To ensure optimal life of the shaving head, regular and proper care is important. Clean the cutting plates with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds, so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the shaving heads can be increased up to 20%. Regrinding can also be delayed. Overview: High quality full metal cutting sets Excellent hardness Particularly easy to fit thanks to Easy-Fit System Efficient and cost-saving: multiple grinding possible Self-cleaning function thanks to small fur drainage channels Suitable for the following clippers, among others: Wahl Liberty Wahl Star Wahl Legend Wahl Fusion Clipper Cutting length: 1,0 mm, A2S/AC Surgical (For close shearing and medical preparation), item no. 258-13210 1,4 mm, A2F/AC Fine (For short shearing), item no. 258-13200 2,5 mm, A2/AC Medium (For all coat types), item no. 258-13220 2,5 mm, CA2/AC Coarse (Coarse cut for dirty coat), item no. 258-13240 5,0 mm, Covercote (For areas that require more protection (e.g. legs), item no. 258-13250

Moser Rex Mini shaving head 0.3 mm Precision-ground, narrow cutting set "Made in Germany" made of solid metal with fine tooth pitch. With this great and durable shaving head, you can get to hard-to-reach parts of the body. Ideal for fine work around face, ears and paws. The original shearing head is suitable for the Clipper Moser Rex Mini. The cutting set is precision ground and made of high quality stainless steel. This manufacturing method gives the shearing blade an extremely long service life. The grooved profile on the back ensures optimal cooling of the cutting set. Thus, the cutting set glides easily through the fur and thus ensures a precise cut. Thanks to the high quality of workmanship the shearing blade can be can be resharpened several times. Care instructions: To ensure optimal life of the shaving head, regular and proper care is important. Clean the cutting plates with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with oil. The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil can be well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the shaving heads can be increased up to 20%. Also the regrinding can be delayed. Overview: Suitable for Moser Rex Mini clipper For fine work like face, ears & paws High quality workmanship Made of high quality stainless steel Precision ground Extremely long service life Multiple regrindable Cutting length 0.3 mm Cutting comb width: 32 mm Tooth pitch: 1 mm Scope of delivery: 1x Moser Rex Mini shaving head 0.3 mm Item no. 1411-7000

Moser Clipper Blade for Moser 1400, Fox 1401-7600 The Moser shaving head "Made in Germany" impresses with high quality workmanship and integrated cutting length adjustment from 0,1 to 3 mm. The Wahl 1401-7600 Shearing head is manufactured in Germany and perfectly suitable for the shearing machines Moser 1400 and Moser Fox. The integrated cutting length adjustment allows the cutting set to be adjusted in steps from 0,1 to 3 mm. The original cutting set is precision ground and made of high quality stainless steel. This manufacturing method gives the shaving head an extremely long service life. The grooved profile on the back ensures optimal cooling of the cutting set. Thus, the cutting set glides easily through the fur and thus ensures a precise cut. Thanks to the high quality of workmanship the shearing blade can be resharpened several times. Care instructions: To ensure optimal life of the shaving head, regular and proper care is important. Clean the cutting plates with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil can be well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the shaving heads can be increased up to 20%. Also the regrinding can be delayed. Overview: High processing quality Made of high quality stainless steel Precision ground Extremely long service life Multiple regrindable Cutting length adjustment from 0,1 to 3 mm Cutting width approx. 46 mm Tooth pitch: 1,6 mm Suitable for the following shearing machines, among others: Moser Fox Moser 1400 Scope of delivery: 1x Moser Clipper Blade for Moser 1400, Fox 1401-7600

Kerbl constanta shear blade set - suitable for constantaRodeo This newly developed shearing blade set, for the professional horse clipper constanta Rodeo from Kerbl, is made of specially hardened steel. These precision-ground shear blades provide the best shearing results even in difficult coat conditions. Made in Germany. At a glance: suitable for constanta Rodeo best shearing results even under difficult coat conditions newly developed shearing blades made of specially hardened steel Made in Germany stands for solid workmanship. The shear blade is available in the following models: Shear blade set constanta r2 35/24 teeth, for standard fine shearing Shear blade set constanta R6 18/24 teethfor rough shearing extremely dense coat Shear blade set constanta r22 35/24 teethskin-tight cut approx. 0.5 mm

excellent clipping properties thanks to stainless steel clipping head powerful li-ion battery protection class IPX7 can also be operated with power pack connected 4-stage cutting height adjustment using push switch (1.0 - 1.9 mm) incl. extensive accessories with 4 clip-on combs (3, 6, 9, 12 mm), cleaning brush, power pack, instructions, oil only for detailed clipping