Kerbl Automatic Chicken Door Opener - Electronic Coop Controller

Sliding Door for Automatic Chicken Door – a sturdy closure for the coop The sliding door for automatic chicken door from Kerbl is the matching accessory for your automatic chicken door unit. The aluminium slider is fitted together with the guide rails onto an existing wall opening in the coop and can then be opened and closed automatically or by hand. Thanks to its robust aluminium construction, the sliding door reliably withstands weather and daily use. It consists of a sturdy panel and two side guide rails, allowing smooth movement within the tracks. Combined with the matching Kerbl control unit, the door reliably opens and closes your poultry house – for better protection against predators and less daily manual work. Overview: Matching slider for Kerbl's automatic chicken door Robust aluminium construction for long-lasting use Complete assembly set including guide rails Easy installation onto an existing wall opening in the coop Compatible with the Kerbl control unit for automatic opening/closing Available in three sizes for different coop openings Technical Data: Material: Aluminium Available sizes: 220 x 330 mm, 300 x 400 mm, 430 x 400 mm Scope of delivery: sliding door incl. guide rails Control unit not included Scope of Delivery: 1x aluminium sliding door1x set of guide rails1x mounting hardware Questions & Answers: Is the control unit included?No, the sliding door is a stand-alone accessory. The matching Kerbl control unit for automatic operation is sold separately. Which size fits my coop?Measure your existing wall opening first. The sliding doors come in three sizes, so a suitable version is available for most coop openings. Can I use the sliding door manually?Yes, the door can be opened and closed either with an automatic control unit or by hand.

Light sensor for reliable control of your automatic chicken doorIf the light sensor on your automatic chicken door fails, this genuine replacement part from Kerbl quickly gets it running smoothly again. The sensor measures ambient light and controls the automatic opening and closing of the door flap – so you don't have to head to the coop yourself morning and evening.The replacement is straightforward and requires no special tools, so your automatic chicken door is back to reliable operation in no time. The sensor supports daylight-dependent control as well as combination with time-based or manual control on the unit.Overview:Genuine replacement part for Kerbl automatic chicken doorEnables daylight-dependent control of the doorCombinable with time-based and manual controlEasy swap when the original sensor is faultyAlso fits the Kerbl EasyProtect complete setTechnical details:Length: 15 cmWidth: 10 cmHeight: 1.5 cmWeight: 74 gIncluded:1x light sensor suitable for Kerbl automatic chicken door and EasyProtect complete setQuestions & Answers:Does the sensor also fit the EasyProtect complete set?Yes, the light sensor fits both the classic automatic chicken door and the Kerbl EasyProtect complete set.Can I replace the sensor myself?Yes, no special tools are needed and it only takes a few minutes.Does control still work on battery power?Yes, the light sensor works reliably whether the door runs on mains or battery power.

Pulleys for automatic chicken door – flexible cord routingThese pulleys for the Kerbl automatic chicken door let you reroute the pull cord whenever the slider isn't fitted directly beneath the control unit. This keeps your coop door running smoothly regardless of the layout.The pack of 4 is made from durable plastic and installs in minutes, making it a handy replacement set if pulleys are lost or worn out over time.Overview:Allows flexible routing of the pull cordUseful when the slider isn't positioned directly under the control unitIdeal replacement if pulleys are lost or wornQuick, tool-free installationCompatible with the Kerbl automatic chicken doorTechnical Data:Material: plasticColour: redSales unit: pack of 4Dimensions (packaging): approx. 12 x 8.5 x 1.5 cmContents:4x pulley (red)FAQ:What are the pulleys used for?They redirect the pull cord when the door slider can't be mounted directly under the control unit.Will these fit any Kerbl chicken door?Yes, this set is designed as a replacement part for the Kerbl automatic chicken door.How many pulleys are included?The set contains 4 plastic pulleys.

Run Your Electric Fence Energiser on a Car Battery with This Connector Cable This connector cable lets you power your electric fence energiser or other 12V devices, such as an automatic chicken coop door, directly from a car battery or dedicated electric fence battery. It's a practical solution for pastures without a mains connection. The cable is compatible with all battery-powered units from Kerbl, AKO and Corral, as well as standard car batteries. A built-in 2 A fuse protects your equipment from overvoltage, keeping your fence energiser running safely and reliably. Overview: Run your fence energiser or 12V devices from a car battery Compatible with all battery devices from Kerbl, AKO, Corral and standard car batteries 2 A fuse for reliable overvoltage protection 1 Ah battery capacity (1,000 mAh) gives roughly 1 year of runtime (excluding typical self-discharge) Barrel connector 5.5 x 2.1 mm for quick connection Also suitable for powering automatic chicken coop doors Technical data: Voltage: 12 V DC Fuse: 2 A Cable length: 3 m Weight: 180 g Connector type: barrel connector 5.5 x 2.1 mm Scope of delivery: 1x connector cable for car/electric fence battery with barrel connector FAQ: Can I use this to run my fence energiser from a car battery?Yes, the cable is compatible with standard car batteries as well as Kerbl, AKO and Corral battery units. Is a battery included?No, only the connector cable is included. How long does a device run on 1 Ah of battery capacity?Roughly 1 year, though this doesn't account for typical battery self-discharge.

Solar Battery Set for Automatic Chicken Door – off-grid power, no battery changes The Solar Battery Set for Automatic Chicken Door from Kerbl makes your chicken door completely self-sufficient. This complete kit includes everything you need to run your automatic chicken door on solar power, with no mains connection and no more battery changes. Just 7 days of sunshine a year are enough for trouble-free continuous operation, thanks to the powerful 10 W solar module that reliably charges the built-in LiPo battery. The mounting kit and 5 m cable let you install the solar module flexibly wherever suits your coop best, while an LED shows you at a glance whether sunlight is sufficient for charging. Overview: Makes your automatic chicken door completely self-sufficient Just 7 days of sunshine per year are enough for continuous operation Mounting kit included for flexible positioning of the solar module 5 m of cable in total for flexible installation LED indicator shows sufficient sunlight for charging Suitable for outdoor use Compatible with the automatic chicken door controllers (item no. 70550, 70590), from version 1.3 Technical data: Solar module voltage: 6 V DC Solar module power: 10 W Battery voltage: 3.7 V Battery capacity: 2,200 mAh Battery technology: LiPo Protection class: IP65 Solar module dimensions: 34.7 x 23.5 x 1.7 cm (L x W x H) Solar module weight: 1.18 kg Scope of delivery: 1x 10 W solar panel1x rechargeable LiPo battery1x mounting kit1x 5 m connection cable Questions & Answers: Which chicken doors is this solar set compatible with?The set is compatible with the controllers of the automatic Kerbl chicken door (item no. 70550 and 70590) from version 1.3 (from 2018). Do I need to dispose of the battery like a regular one?The built-in lithium-ion battery is subject to legal battery take-back requirements. Return it to an official collection point once it reaches the end of its life. Is the solar panel sufficient in winter too?Yes, just 7 days of sunshine per year are enough for continuous, reliable operation, even with weak winter sun.

Kerbl Self-Locking Kit for Automatic Chicken Door – reliable predator protection This self-locking kit for automatic chicken doors keeps foxes, martens and raccoons out of your coop for good. The retrofit kit is fitted directly to the slider of your automatic chicken door and stops the door being lifted from outside once it has closed. As soon as the slider reaches the lower stop, spring-loaded bolts push outward and lock the door securely in place. When the automatic door opener starts in the morning, the bolts retract and the door opens as normal. Fitting is quick thanks to the supplied drilling template, no special tools required. Overview: Extra security against foxes, martens & raccoons Prevents the door from being lifted from outside Bolts lock automatically once the lower stop is reached Releases automatically on the next automatic door cycle Easy fitting thanks to the included drilling template Complete set including all necessary screws Technical Data: Material: metal Dimensions: approx. 17.6 x 16 x 3 cm Weight: approx. 0.05 kg Fits common slider doors (incl. 220 x 330 mm and 300 x 400 mm) Scope of delivery: 1x self-locking set1x set of mounting screws1x drilling template FAQ: Is the chicken door included?No, this is a retrofit kit for an existing slider door on your automatic chicken door. Which slider doors is it compatible with?It fits the common Kerbl slider doors sized 220 x 330 mm and 300 x 400 mm. Does the door unlock again automatically in the morning?Yes, once the automatic opener starts, the bolts retract and the door can be lifted again.