Agrarzone Battery Horse Clipper PowerCut in a nutshell:


  • Professional shearing machine for horse clipping
  • Also suitable for thick coats
  • 2 Lithium-ion batteries for mobile clipping
  • Incl. Supra clipper blade set 31/15 teeth made of stainless steel
  • Ergonomic shape & incredibly light, only 1090 g!

Agrarzone Horse Clipper PowerCut incl. 2 batteries

The PowerCut Akku is a professional clipper for full horse clipping with excellent handling characteristics and also light with only 1090 g.

With the new Agrarzone Horse Clipper PowerCut Akku you can shear your horse precisely and quickly without an annoying power cable. The clipper convinces with its very good price/performance ratio and the two 14,4 volt lithium-ion block batteries. Thanks to the two 14,4 volt lithium block batteries, non-stop clipping is possible without mains power. The powerful 45 watt motor delivers an extraordinarily high output of 2300 strokes per minute and is in no way inferior to mains-powered models.

The clipper weighs only 1090 g with battery. The ergonomic shape, the special surface finish and the balanced centre of gravity of the housing shell ensure low-fatigue working. Thanks to the design, the machine fits perfectly in the hand. Due to the small circumference of the plastic shell, the clipper is also very suitable for smaller hands.

The Supra clipper blade set included in the delivery is made of high-quality stainless steel. Thanks to the hollow grind and the blade geometry, the blades glide easily through the coat, even with very thick or dirty coats the machine has no difficulties.

Important: For a long life of your clipper, oil the machine with clipper oil before, during, and after clipping.

Overview:

  • Professional clipper for horses and cattle
  • Also suitable for thick coats
  • Powerful motor with 45 watts
  • 2 Lithium-ion block batteries for mobile clipping
  • Optimal weight distribution for fatigue-free work
  • Extremely quiet operation
  • Attractive, ergonomic design
  • High quality workmanship & long service life
  • Incredibly light, only 1090 g!
  • Incl. Supra stainless steel shear blade set 31/15 teeth

Technical data:

  • Operation mode: Battery
  • Voltage: 14,4 V
  • Motor power 45 W
  • Battery technology: Li-Ion
  • Battery capacity: 2500 mAh
  • Battery run time: approx. 120 min
  • Battery charging time: approx. 90 min
  • Cutting speed: 2300 strokes/min
  • Sound pressure level: 78 dB (A)
  • Tooths lower / upper blade: 31 / 15
  • Dimensions: 28,5 x 8 x 8 cm (incl. battery)
  • Weight: 1090 g (incl. battery)

Scope of delivery:

1x Agrarzone Shearing machine PowerCut Akku with clipper head
1x Set of clipper blades (mounted)
2x Lithium-ion block batteries
1x Special shearing oil
1x Screwdriver
1x Storage case
1x Instruction manual

Manufacturer "Agrarzone"

Agrarzone - Agriculture with passion

Experience our huge range for farmers, riders and hobby farmers now on Agrarzone - our specialized web shop for Agriculture. Here you will find high-quality products relating to electric fences, animal husbandry, stables, farms and much More.

Battery charging time: 90 min
Battery Runtime: 120 min
Dezibel: 78 dB
stroke rate: 2300 strokes/min
Capacity: 45 W
Power source: Rechargeable battery
Animal species: Cattle, Horse

1 of 1 reviews

5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


17 November 2022 21:11

Schermaschine

Super, sehr zufrieden

Kerbl Constanta Clipper oil 100 ml
Oil for clipping machines 100 ml ensures that all moving parts in the shaving head are properly lubricated it is also an excellent oil for all other trademark clippers on the market Size: 100 ml

Content: 0.1 Litre (€65.90* / 1 Litre)

€6.59*
CoolSpray for clipping blades 500 ml
Kerbl CoolSpray for clipping blades 500 ml all-in-one cooling, lubrication and cleaning improves shearing results and keeps clipper blades sharp for longer removes hair and fur residue and dirt

Content: 0.5 Litre (€21.98* / 1 Litre)

€10.99*
Pcs.
Kerbl Shearing template for horses set of 3
Shearing template for horses - set of 3These beautiful stencils are versatile it can be shorn, brushed or sprayed. The material is high-quality plastic and can be wash up well. The set consists of heart, star and lily pattern.for shearing, brushing and sprayingmade of high-quality plasticreusable and washableScope of delivery:1x heart and star pattern in different sizes from 5 cm to 12 cm1x French Lillie 14 x 11cm and crown 14 cm1x heart 13 cm and star 13 cm

€15.99*
Pcs.
Aesculap clipper wall holder
Aesculap Wall holder for animal hair clippers - universal clipper holder Suitable holders for the electric hair clippers for screwing on vertical surfaces. The Aesculap wall holder is ideal for all professional dog groomers or veterinarians and order lovers. With this universal clipper holder your pet hair clipper is perfectly supplied. Simply mount it vertically on a wall with two screws. Suitable for cable-bound clippers. In 1912, the invention of the first electrically operated hair clippers was another milestone in the success story of Aesculap. As a premium brand in the field of clippers and hair care, we are aware of our responsibility towards professional and private users regarding consistently high quality! At present, shearing machines from Aesculap can be found in approx. 80% of professional dog grooming salons and in over 90% of all veterinary practices in Germany.

€31.99*
Pcs.
Battery charger for clippers Agrarzone PowerCut / Clipster FarmClipper 2
Battery charger for clippers Agrarzone PowerCut / Clipster FarmClipper 2 This 230 V Battery charger is a useful accessory for the cordless clippers Agrarzone PowerCut and Clipster Farmclipper 2 horse / cattle. The power charging station fully charges lithium-ion batteries in approx. 90 minutes and, together with a spare battery, enables non-stop clipping. At a glance: Battery charger for clippers Agrarzone PowerCut / Clipster FarmClipper 2 Short battery charging time of only 90 minutes Optimised working and charging times for non-stop clipping Charger with 230 V mains connection Suitable for these Clippers: Agrarzone Horse clipper PowerCut rechargeable battery Clipster Horse clipper FarmClipper 2 rechargeable battery Clipster Cattle clipper FarmClipper 2 rechargeable battery Scope of delivery: 1x Battery charger for clippers Agrarzone PowerCut / Clipster FarmClipper 2

€39.99*
Pcs.
Replacement battery for Clipper Agrarzone PowerCut / Clipster FarmClipper 2
Replacement battery for Clipper Agrarzone PowerCut / Clipster FarmClipper 2 This lithium-ion replacement battery is suitable for the cordless clippers Agrarzone PowerCut and Clipster Farmclipper 2 horse / cattle. A long battery runtime of approx. 120 minutes is guaranteed due to the high capacity. For a longer shearing time, an additional battery is recommended. This allows you to shear continuously, even if 1 battery is being charged. Technical data: Battery technology: Li-Ion Battery voltage: 14,4 V Battery capacity: 2500 mAh Battery life: approx. 120 min Battery charging time: approx. 90 min Suitable for these Clippers: Agrarzone Horse clipper PowerCut rechargeable battery Clipster Horse clipper FarmClipper 2 rechargeable battery Clipster Cattle clipper FarmClipper 2 rechargeable battery Scope of delivery: 1x Replacement battery 14.4 V for Clipper Agrarzone PowerCut / Clipster FarmClipper 2

€63.99*
Pcs.
Aesculap Clipper Blade Econom GT501 Upper blade 15 teeth
Size: GT501 Upper blade 15 teeth
Aesculap Clipper Blade Econom High quality shearing blades for shearing cattle, horses and sheep. 100% Made in Germany. The Aesculap Econom shearing blades are available for horse and cattle shearing, as well as for sheep shearing. The blades are suitable for the Shearing machines Econom, II, CL, NOVA, Equipe and Bonum. Due to the production from special Aesculap-Carbon-Steel the cutting inserts have a significantly higher cutting capacity than conventional cutting sets. The good processing quality of the Aesculap CNC machining centers guarantees a consistently high quality. The top and bottom plates of the Aesculap shear heads are milled and profile ground. The high-end surface finishing provides a high level of corrosion protection. This makes the cutting sets very durable, can be ground several times and optimally suited for professional use in agriculture. Care instructions: To ensure optimum life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Long cutting ability Cutting surfaces can be reground very often High processing quality due to Aesculap CNC machining centers All parts are milled and profile ground Resistant high-end surface finishing High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Horse and Cattle Clipper Aesculap Econom II Cattle Clipper Aesculap Econom II Sheep Clipper Aesculap Econom CL Cattle Clipper Aesculap Econom CL Fitter Cattle Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom Equipe Horse Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Aesculap Bonum Cattle Clipper Aesculap Bonum Horse Clipper Cutting length: GT501 Upper blade (15 teeth) cattle and horses, normal equipment GT502 Bottom blade (31 teeth), 3 mm cattle and horses, standard equipment GT503 Upper blade (17 teeth) cattle, sheep, fine wool sheep GT504 Bottom blade (18 teeth), 3 mm cattle, sheep, fine-wooled sheep GT505 Upper blade (23 teeth) horses and cattle GT506 Bottom blade (23 teeth), 3 mm cattle, dogs, goats GT508 Bottom blade (51 teeth), 0,1 mm horses, cattle (udder shearing) and industrial shearing GT511 Bottom blade (31 teeth), 1 mm horses and cattle. for very fine smooth shearing GT510 Bottom blade (24 teeth), 5 mm dogs, goats and Cushing's syndrome (horses)

€28.99*
Pcs.
Aesculap Clipper Blade Econom GT502 Bottom blade 31 teeth, 3 mm
Size: GT502 Bottom blade 31 teeth, 3 mm
Aesculap Clipper Blade Econom High quality shearing blades for shearing cattle, horses and sheep. 100% Made in Germany. The Aesculap Econom shearing blades are available for horse and cattle shearing, as well as for sheep shearing. The blades are suitable for the Shearing machines Econom, II, CL, NOVA, Equipe and Bonum. Due to the production from special Aesculap-Carbon-Steel the cutting inserts have a significantly higher cutting capacity than conventional cutting sets. The good processing quality of the Aesculap CNC machining centers guarantees a consistently high quality. The top and bottom plates of the Aesculap shear heads are milled and profile ground. The high-end surface finishing provides a high level of corrosion protection. This makes the cutting sets very durable, can be ground several times and optimally suited for professional use in agriculture. Care instructions: To ensure optimum life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Long cutting ability Cutting surfaces can be reground very often High processing quality due to Aesculap CNC machining centers All parts are milled and profile ground Resistant high-end surface finishing High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Horse and Cattle Clipper Aesculap Econom II Cattle Clipper Aesculap Econom II Sheep Clipper Aesculap Econom CL Cattle Clipper Aesculap Econom CL Fitter Cattle Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom Equipe Horse Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Aesculap Bonum Cattle Clipper Aesculap Bonum Horse Clipper Cutting length: GT501 Upper blade (15 teeth) cattle and horses, normal equipment GT502 Bottom blade (31 teeth), 3 mm cattle and horses, standard equipment GT503 Upper blade (17 teeth) cattle, sheep, fine wool sheep GT504 Bottom blade (18 teeth), 3 mm cattle, sheep, fine-wooled sheep GT505 Upper blade (23 teeth) horses and cattle GT506 Bottom blade (23 teeth), 3 mm cattle, dogs, goats GT508 Bottom blade (51 teeth), 0,1 mm horses, cattle (udder shearing) and industrial shearing GT511 Bottom blade (31 teeth), 1 mm horses and cattle. for very fine smooth shearing GT510 Bottom blade (24 teeth), 5 mm dogs, goats and Cushing's syndrome (horses)

Variants from €28.99*
€35.99*
Pcs.
Premium Clipper Blade Set for PowerCut, FarmClipper & Constanta 31/15 teeth
Size: 31/15 teeth
Shearing blade set Premium for PowerCut, Constanta, FarmClipper High quality shearing blade set made of selected tool steel for a clean shearing result. The Premium shearing blade set is suitable for many common shearing machines such as the Agrarzone Powercut, Kerbl FarmClipper, Kerbl Constanta and other common shearing machines from Heiniger, Aesculap & Liscup. The optimised blade geometry and the selected tool steel with special hardening ensure an exact cutting pattern and a long service life. Care instructions: To ensure the optimum life of the clipper blades, regular and correct care is important. Clean the cutting plates with a soft cloth or brush. Make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades must be oiled before each use with the shearing head mounted. During work, the clipper blades must be oiled every 5 - 10 minutes. After oiling, let the machine idle for a few seconds so that the oil can spread well and is not transferred to the animal's hair. With proper maintenance and care, the durability of the shaving heads can be increased by up to 20%. Regrinding can also be delayed. Overview: Shearing blades for PowerCut, Constanta, FarmClipper Also for common Heiniger & Aesculap clippers Selected tool steel with special hardening Optimised blade geometry For a clean & exact cutting pattern High quality workmanship Long service life Shearing type: 21/23 teeth for cattle all-round shearing 3 mm 18/17 teeth for cattle, fine-wooled sheep & noble sheep 3 mm 31/15 teeth for cattle / horses standard shearing 3 mm 31/23 teeth for udder shearing & industrial shearing 31/15 teeth for fine shearing close to the skin, for veterinarians Scope of delivery: 1x Shearing knife set Premium consisting of upper & lower knife

€52.99*
Pcs.