Heiniger Xperience 2-Speed Horse and Cattle Clipper, 250 W

Reliable clipper maintenance with Kerbl Constanta Clipper Oil Kerbl Constanta clipper oil was developed for continuous-use clippers and ensures optimal lubrication of all moving parts in the clipping head. It cleans, lubricates and helps protect the clipping head, and is ideal for use before and after every clipping session. The oil is not only suitable for Kerbl clippers but also works excellently with all common brands of clipping machines. To help prevent the clipping head from overheating during use, apply a few drops of oil to the blade approximately every 5 minutes. After clipping, remove hair residue from the machine and re-oil it to keep it working reliably. Overview: Optimal lubrication of all moving parts in the clipping head Cleans the clipping head and supports corrosion protection Developed for continuous-use clippers Compatible with all common brands of clipping machines Ideal for care before and after every clip Use & Notes: Apply to the clipping head before and after every clip During clipping, add a few drops to the blade roughly every 5 minutes to prevent overheating Remove hair residue after clipping and re-oil Briefly switch the machine on after oiling to distribute the oil evenly Use only as intended according to the instructions Technical Data: Content: 500 ml Packaging: bottle with drip cap Country of origin: Germany Scope of Delivery: 1x Kerbl Constanta clipper oil, 500 ml Questions & Answers: How often should I oil the clipping head during use?Apply a few drops to the blade roughly every 5 minutes to help prevent overheating. Can I use this oil with clippers from other brands?Yes, it is suitable for all common brands of clipping machines. When should I oil the machine?Before and after every clip, and regularly during use.Hazard information:Always follow the information on the product label.Use biocides safely. Always read the label and product information before use.

Kerbl CoolSpray – Cooling and Lubricating Spray for Clipping Blades The Kerbl CoolSpray is a cooling and lubricating spray for clipper blades, ideal when clipping horses, cattle and other animals. It cools, lubricates and cleans the blades in one step, helping you achieve a smooth, even clip every time you use your clipping machine. Regular use keeps clipper blades sharp for longer and lets them glide more easily through the coat. The spray also removes hair, fur and dirt residue from the clipping head, making post-clip cleaning easier and supporting the lifespan of the blades. After use, it's advisable to additionally lubricate the head with a suitable clipper oil. Overview: Cools, lubricates and cleans clipping blades in one step Supports an even, clean clipping result Keeps clipper blades sharp for longer Removes hair, fur and dirt residue from the clipping head Suitable for use on horses, cattle and other animals Use & Notes: Spray directly onto the clipper blades before and during clipping Only use in well-ventilated areas, not in enclosed spaces without airflow Do not spray onto hot or heated surfaces Store the can upright, away from direct sunlight and temperatures above 50 °C Clean the clipping head after use and lubricate additionally if needed Technical Data: Contents: 500 ml Format: aerosol spray can Country of origin: Denmark Scope of Delivery: 1x Kerbl CoolSpray cooling & lubricating spray for clipping blades, 500 ml Questions & Answers: How often should I apply CoolSpray during clipping?Depending on how long you clip and how warm the blades get, you can apply the spray several times during clipping to keep the blades cool and sliding smoothly. Can I use CoolSpray with any clipper brand?Yes, the spray is suitable for clipper blades from common clipping machine brands, regardless of manufacturer. Does CoolSpray replace clipper oil?No, CoolSpray is designed for cooling and cleaning; for long-term lubrication of the mechanism, a dedicated clipper oil is also recommended.Hazard information:Always follow the information on the product label.Signal word: DangerUFI: J4GP-F1WJ-S003-CDM1Hazard statements (H):H222: Extremely flammable aerosol.H229: Pressurised container: May burst if heated.H315: Causes skin irritation.H319: Causes serious eye irritation.H336: May cause drowsiness or dizziness.H411: Toxic to aquatic life with long lasting effects.Hazard-determining components: Kohlenwasserstoffe, C7, n-Alkane, Isoalkane, Cyclene; AcetonPrecautionary statements (P):P101: If medical advice is needed, have product container or label at hand.P102: Keep out of reach of children.P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P211: Do not spray on an open flame or other ignition source.P251: Do not pierce or burn, even after use.P273: Avoid release to the environment.P280: Wear protective gloves/protective clothing/eye protection/face protection.P403+P233: Store in a well-ventilated place. Keep container tightly closed.P410+P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F.

Heiniger Clipper Blade Set for Xplorer, Xperience, Handy, Progress The Heiniger clipper blade set is the genuine replacement for your Heiniger clipper used for horse and cattle clipping. Upper and lower blades are made of sturdy, ground steel and deliver a clean, even finish – whether for everyday clipping, veterinary use or show preparation. These blade sets fit the Xplorer, Xperience, Handy and Progress clippers and come in several tooth counts and cutting depths – from coarse for dirty coats to fine for close clipping. This means you'll find the right set for every job around the yard and stable. Regular oiling before and during use plus thorough cleaning after clipping can extend blade lifespan by up to 20%. Overview: Fits Heiniger Xplorer, Xperience, Handy and Progress Suitable for horse and cattle clipping For veterinary use, everyday clipping, tournaments and horse shows Coat length after clipping from 0 to 4 mm depending on variant Clean, even cutting result Made from high-strength ground special steel Technical Data: Set consists of upper and lower blade Blade width: 78–80 mm Material: ground special steel Variants: 31/15, 21/23, 31/23, 31F/15, 31F/23, 35/17, 53/23 Scope of Delivery: 1x Heiniger clipper blade set (upper and lower blade, depending on chosen variant) FAQ: How often should I oil the blades?Before every use with the blade mounted, and every 5–10 minutes during clipping. Which blade is best for everyday clipping?The 31/15 standard set is recommended for daily use; for dirty coats choose the 21/23. Do these blades fit other Heiniger models too?These sets are designed for Xplorer, Xperience, Handy and Progress.

Wahl Cleaning Spray Keeps Clipper Blades Hygienically CleanThe Wahl Cleaning Spray is a quick and reliable way to care for your clipper or trimmer blade set. It removes hair, grease and dirt from the blade set, keeping it hygienically clean for every use on the farm, in the stable or with your animals.Regular use protects against corrosion and significantly extends the service life of your blades. Simply spray directly onto the blade set while the clipper is running, holding the machine slightly downwards so no spray gets into the housing. Then switch off the clipper and wipe the blade set with a soft, clean cloth – ready for the next clip.Overview:Removes hair and dirt from blade sets reliablyProtects against corrosion for a longer blade lifespanQuick and easy application directly on the running clipperIdeal for regular care in farm and stable routinesSuitable for clippers and trimmers of various brandsTechnical Data:Content: 250 mlType: Spray bottleWeight: approx. 0.28 kgScope of Delivery:1x Wahl Cleaning Spray for Clipper Blades, 250 mlQuestions & Answers:How often should I clean the blade set?Ideally after every use or before every new clipping session, to prevent hair and dirt from building up.Can I use this spray on any clipper?Yes, it's suitable for blade sets of most common clippers and trimmers.Do I still need to oil the blades after spraying?For extra corrosion protection and smoother running, a few drops of blade oil before each use are recommended.