Aesculap Econom NOVA CL Cordless Sheep Clipper, Blade Set

Aesculap Clipper Wall Holder – secure storage for your clipper The Aesculap GH574C wall holder keeps your animal clipper within easy reach and safely off the grooming table. It's a practical solution for professional dog groomers, vets and anyone who wants a tidy workspace. Made from durable metal, the holder simply screws onto any vertical surface with two screws – for example right next to your grooming table for quick access. It's designed for corded clippers such as the Aesculap Favorita II and FAV5; it's not suitable for cordless models due to their slimmer shape. Overview: Keeps your clipper close at hand and protected from knocks and dirt Helps keep your grooming table or treatment room tidy Sturdy metal construction built for daily professional use Quick to install with just two screws on any vertical surface Fits common corded Aesculap clippers such as Favorita II and FAV5 Technical Data: Material: durable metal Dimensions: approx. 21 x 14 x 6 cm (L x W x H) Weight: approx. 71 g Mounting: screw-on, 2 screws (not included) Suitable for: corded clippers, not for cordless models Scope of Delivery: 1x Aesculap Clipper Wall Holder GH574C FAQ: Does it fit every clipper model?It fits most corded small-animal clippers, including the Aesculap Favorita II and FAV5. It's not recommended for cordless clippers or very slim models, as they can slip out. Are screws included?No, you'll need two screws of your own to mount it on the wall.

Aesculap Blade Set Stand – Tidy Storage for Your Favorita Blades The Aesculap blade set stand GH575 keeps up to 5 clipper blade sets neatly organised and within easy reach. Perfect for farmers, shearers and anyone using an Aesculap Favorita clipper who wants their blade sets stored safely and ready to grab. Instead of leaving delicate blade sets loose in a drawer or case, the plastic stand holds them upright and protects them from knocks and scratches. That means you always find the right blade quickly when swapping heads out in the barn or on the yard - saving time during a busy shearing session. Overview: Holds up to 5 blade sets, all sorted at a glance Protects delicate blade sets from damage and scratches Keeps blades ready to use right at your workstation Fits Aesculap Favorita blade sets (slide system) Compact and space-saving for barn or shearing kit Easy to clean thanks to smooth plastic finish Technical Data: Dimensions: approx. 16.5 x 7 x 4.5 cm (L x W x H) Weight: approx. 141 g Material: durable plastic, red colour Capacity: 5 blade sets Scope of Delivery: 1x Aesculap blade set stand GH5751x Blade sets not included FAQ: Does this stand fit any Aesculap blade set?It's designed for Aesculap Favorita blade sets with the slide system. Check compatibility first for other blade systems. Are the blade sets included?No, the stand is supplied empty - it's for storage only. How many blade sets fit in the stand?Up to 5 blade sets fit at the same time.

Aesculap Clipper Oil – reliable care for your shearing machineThe Aesculap clipper oil GT604 is the special oil developed for all Aesculap shearing machines and works just as well with other common brand clippers. It provides optimum lubrication for every moving part in the shearing head, making it essential for anyone who regularly clips horses, cattle, sheep or dogs.A well-lubricated shearing head runs more smoothly, takes strain off the motor and delivers a cleaner cut. Apply a few drops to the side of the cutting set every 5 to 10 minutes during shearing, and oil again after clipping once hair residue has been removed – this keeps your blades sharp and ready for the next job. The oil does not resinify or stick together, which noticeably extends the service life of both shearing head and machine.At a glance:Ensures optimum lubrication of all moving parts in the shearing headDoes not resinify or stick together, even with frequent useSuitable for all common brand shearing machines, not just AesculapTakes strain off the motor and protects blades from wearDelivers a cleaner, more even cutPractical bottle size for long-lasting useTechnical data:Content: 90 mlSuitable for all Aesculap shearing machines and common third-party brandsLiquid special oil in a practical bottleScope of delivery:1x Aesculap Clipper Oil 90 mlQuestions & Answers:How often should I oil my shearing head?During shearing, apply a few drops to the cutting set every 5 to 10 minutes to reduce friction and wear.Does the oil also work with other brands?Yes, besides Aesculap machines it is also excellently suited for all common brand shearing machines.When should I apply extra oil?After shearing, remove any hair residue from the cutting set and oil it again so the machine is optimally protected for the next use.

Aesculap Econom Clipper Blade for a Perfectly Even Sheep ShearThese upper and lower blades from Aesculap are designed for the Econom II, CL, NOVA and NOVA CL shearing machines and deliver a clean, even cut – even through thick or dirty wool. A smart choice for sheep farmers who value long tool life and repeated resharpening over frequent replacement.The special shearing blades are made from high-quality, low-wear carbon steel and can be reground several times instead of being replaced every season. With proper care – regular cleaning and oiling with special GT604 clipper oil – cut quality stays consistent and blade lifespan increases noticeably.Overview:Very long tool life thanks to abrasion-resistant carbon steelUniform, long-lasting cut qualityCutting surfaces can be reground multiple timesHigh corrosion resistance for reliable daily use100% Made in GermanyTechnical Data:Material: abrasion-resistant carbon steelGT578 upper blade: 4 teeth, 4.5 mm cutting length – fits Econom NOVA, II, CL, NOVA CLGT588 lower blade: 13 teeth, 3.5 mm cutting length, width approx. 77 mm – fits Econom II, CLGT594 lower blade: 13 teeth, 3.5 mm cutting length, width approx. 86 mm – fits Econom II, CLGT598 lower blade: 13 teeth, 3.5 mm cutting length – fits Econom NOVA, NOVA CLIncluded:1x Aesculap Econom clipper blade (upper or lower blade depending on selected variant)FAQ:How often should I oil the clipper blades?Before every use and then every 5–10 minutes during shearing with Aesculap clipper oil GT604.Can the blades be reground several times?Yes, the high-quality carbon steel allows repeated resharpening before replacement is needed.Which shearing machines are these blades compatible with?Aesculap Econom II, Econom CL, Econom NOVA and Econom NOVA CL.

Aesculap Spare Battery for Econom CL – reliable power for shearing This Aesculap spare battery keeps your Econom CL clipper running without interruption in the barn or field. Built with lithium-ion technology, it delivers dependable power for long shearing sessions – ideal for farmers and sheep keepers who need consistent performance. Thanks to its 3500 mAh capacity, the battery holds up even under heavy use. The lithium technology prevents the memory effect, so full power is retained throughout its service life. Simply fit it into your Econom CL or Econom CL Equipe and carry on working – ready for the next shearing season. Overview: Fits Aesculap Econom CL and Econom CL Equipe Lithium-ion technology with no memory effect High capacity for long, uninterrupted shearing sessions Quick swap as spare or second battery Proven in professional sheep and cattle shearing Technical Data: Capacity: 3,500 mAh Nominal voltage: approx. 21.6 V Runtime: approx. 50–70 minutes Charging time: approx. 80 minutes Cell type: lithium-ion Scope of delivery: 1x Aesculap spare battery Econom CL, lithium-ion, 3,500 mAh FAQ: Does this battery fit my Aesculap Econom CL Equipe?Yes, the spare battery fits both the Econom CL and the Econom CL Equipe. How long can I work on one charge?Depending on use, runtime is approximately 50 to 70 minutes. Does the battery lose performance with frequent charging?No, thanks to lithium-ion technology there is no memory effect.

Aesculap Econom Clipper Blade for a Perfectly Even Sheep ShearThese upper and lower blades from Aesculap are designed for the Econom II, CL, NOVA and NOVA CL shearing machines and deliver a clean, even cut – even through thick or dirty wool. A smart choice for sheep farmers who value long tool life and repeated resharpening over frequent replacement.The special shearing blades are made from high-quality, low-wear carbon steel and can be reground several times instead of being replaced every season. With proper care – regular cleaning and oiling with special GT604 clipper oil – cut quality stays consistent and blade lifespan increases noticeably.Overview:Very long tool life thanks to abrasion-resistant carbon steelUniform, long-lasting cut qualityCutting surfaces can be reground multiple timesHigh corrosion resistance for reliable daily use100% Made in GermanyTechnical Data:Material: abrasion-resistant carbon steelGT578 upper blade: 4 teeth, 4.5 mm cutting length – fits Econom NOVA, II, CL, NOVA CLGT588 lower blade: 13 teeth, 3.5 mm cutting length, width approx. 77 mm – fits Econom II, CLGT594 lower blade: 13 teeth, 3.5 mm cutting length, width approx. 86 mm – fits Econom II, CLGT598 lower blade: 13 teeth, 3.5 mm cutting length – fits Econom NOVA, NOVA CLIncluded:1x Aesculap Econom clipper blade (upper or lower blade depending on selected variant)FAQ:How often should I oil the clipper blades?Before every use and then every 5–10 minutes during shearing with Aesculap clipper oil GT604.Can the blades be reground several times?Yes, the high-quality carbon steel allows repeated resharpening before replacement is needed.Which shearing machines are these blades compatible with?Aesculap Econom II, Econom CL, Econom NOVA and Econom NOVA CL.