Aesculap Econom CL Cattle Clipper Battery, Shearing Blade Set, 1x cordless

Torqui GT146: Precision Adjusting Tool for Perfect Blade PressureThe Aesculap Torqui is a special torque key that lets you set the exact blade pressure on your cattle or horse clipper quickly and accurately. This saves time on maintenance and protects your clipper blades from unnecessary wear.Blade pressure that's set too high causes premature blade wear and excess heat at the clipper head. With the Torqui, the torque is always set precisely – the knurled screw simply won't tighten further once the ideal point is reached. This keeps cutting performance consistent and extends the intervals between regrinding, significantly increasing the lifespan of your blades. No prior experience is needed, and adjustment takes just seconds in the barn or on the farm.Overview:Precise basic adjustment of blade pressure without prior experienceLonger intervals between regrinding thanks to gentle pressure settingIncreased lifespan of shearing platesConsistent edge-retention throughout the service lifeSmall, handy and maintenance-freeFits all Bonum and Econom clipper headsTechnical Data:Dimensions: approx. 12 x 9.5 x 4 cmWeight: approx. 50 gDesign: precision instrument, made in GermanyApplication: Aesculap cattle and horse clippers with Econom blade systemIncluded:1x Aesculap Torqui GT146 precision adjusting toolFAQ:Does the Torqui fit every Aesculap clipper?It's suitable for all Bonum and Econom clipper heads. With non-standard blade combinations, manual fine-adjustment may be needed.Do I need to change anything on my clipper first?New Bonum clippers already come with the matching GT147 knurled screw; older models may need this part separately.

Aesculap Clipper Oil – reliable care for your shearing machineThe Aesculap clipper oil GT604 is the special oil developed for all Aesculap shearing machines and works just as well with other common brand clippers. It provides optimum lubrication for every moving part in the shearing head, making it essential for anyone who regularly clips horses, cattle, sheep or dogs.A well-lubricated shearing head runs more smoothly, takes strain off the motor and delivers a cleaner cut. Apply a few drops to the side of the cutting set every 5 to 10 minutes during shearing, and oil again after clipping once hair residue has been removed – this keeps your blades sharp and ready for the next job. The oil does not resinify or stick together, which noticeably extends the service life of both shearing head and machine.At a glance:Ensures optimum lubrication of all moving parts in the shearing headDoes not resinify or stick together, even with frequent useSuitable for all common brand shearing machines, not just AesculapTakes strain off the motor and protects blades from wearDelivers a cleaner, more even cutPractical bottle size for long-lasting useTechnical data:Content: 90 mlSuitable for all Aesculap shearing machines and common third-party brandsLiquid special oil in a practical bottleScope of delivery:1x Aesculap Clipper Oil 90 mlQuestions & Answers:How often should I oil my shearing head?During shearing, apply a few drops to the cutting set every 5 to 10 minutes to reduce friction and wear.Does the oil also work with other brands?Yes, besides Aesculap machines it is also excellently suited for all common brand shearing machines.When should I apply extra oil?After shearing, remove any hair residue from the cutting set and oil it again so the machine is optimally protected for the next use.

Aesculap Econom Clipper Blade – Sharp, Reliable Replacement BladesThe Aesculap Econom clipper blade is the right replacement part for your shearing machine when clipping cattle, horses and sheep. The cutting sets fit the Econom, II, CL, NOVA, Equipe and Bonum shearing machines and restore your machine's full cutting performance. Aesculap is now part of the Kerbl Group, manufactured in Germany – quality farmers and horse owners have trusted for generations.Made from special Aesculap carbon steel, the cutting plates offer significantly higher cutting capacity than conventional cutting sets. Top and bottom plates are milled and profile ground on Aesculap CNC machining centres, guaranteeing consistently high quality. The durable surface finish provides reliable corrosion protection, so the blades stay sharp even under heavy use in the barn or on the field and can be reground multiple times.Overview:Very long tool life thanks to abrasion-resistant carbon steelLong-lasting cutting performance even under heavy useCutting surfaces can be reground multiple times – saves on replacement costsConsistently high manufacturing quality through CNC productionHigh corrosion protection from the high-end surface finish100% Made in GermanyTechnical Data:Material: Aesculap carbon steelSurface: milled and profile ground, high-end finishFits shearing machines: Econom, Econom II, Econom CL, Econom NOVA, Econom Equipe, BonumAvailable variants: GT501, GT502, GT503, GT504, GT505, GT506, GT508, GT510, GT511Scope of Delivery:1x Aesculap Econom clipper blade (top or bottom blade depending on selected variant)FAQ:How often should I oil the blades while working?Oil the mounted clipper head before every use and then every 5-10 minutes with special clipper oil (GT604).Which shearing machines do the Econom blades fit?The cutting sets are compatible with the Econom, Econom II, Econom CL, Econom NOVA, Econom Equipe and Bonum models.Can the blades be reground?Yes, thanks to the abrasion-resistant carbon steel, the cutting sets can be reground several times for much longer use.

Aesculap Econom Clipper Blade – Sharp, Reliable Replacement BladesThe Aesculap Econom clipper blade is the right replacement part for your shearing machine when clipping cattle, horses and sheep. The cutting sets fit the Econom, II, CL, NOVA, Equipe and Bonum shearing machines and restore your machine's full cutting performance. Aesculap is now part of the Kerbl Group, manufactured in Germany – quality farmers and horse owners have trusted for generations.Made from special Aesculap carbon steel, the cutting plates offer significantly higher cutting capacity than conventional cutting sets. Top and bottom plates are milled and profile ground on Aesculap CNC machining centres, guaranteeing consistently high quality. The durable surface finish provides reliable corrosion protection, so the blades stay sharp even under heavy use in the barn or on the field and can be reground multiple times.Overview:Very long tool life thanks to abrasion-resistant carbon steelLong-lasting cutting performance even under heavy useCutting surfaces can be reground multiple times – saves on replacement costsConsistently high manufacturing quality through CNC productionHigh corrosion protection from the high-end surface finish100% Made in GermanyTechnical Data:Material: Aesculap carbon steelSurface: milled and profile ground, high-end finishFits shearing machines: Econom, Econom II, Econom CL, Econom NOVA, Econom Equipe, BonumAvailable variants: GT501, GT502, GT503, GT504, GT505, GT506, GT508, GT510, GT511Scope of Delivery:1x Aesculap Econom clipper blade (top or bottom blade depending on selected variant)FAQ:How often should I oil the blades while working?Oil the mounted clipper head before every use and then every 5-10 minutes with special clipper oil (GT604).Which shearing machines do the Econom blades fit?The cutting sets are compatible with the Econom, Econom II, Econom CL, Econom NOVA, Econom Equipe and Bonum models.Can the blades be reground?Yes, thanks to the abrasion-resistant carbon steel, the cutting sets can be reground several times for much longer use.

Aesculap Clipper Wall Holder – secure storage for your clipper The Aesculap GH574C wall holder keeps your animal clipper within easy reach and safely off the grooming table. It's a practical solution for professional dog groomers, vets and anyone who wants a tidy workspace. Made from durable metal, the holder simply screws onto any vertical surface with two screws – for example right next to your grooming table for quick access. It's designed for corded clippers such as the Aesculap Favorita II and FAV5; it's not suitable for cordless models due to their slimmer shape. Overview: Keeps your clipper close at hand and protected from knocks and dirt Helps keep your grooming table or treatment room tidy Sturdy metal construction built for daily professional use Quick to install with just two screws on any vertical surface Fits common corded Aesculap clippers such as Favorita II and FAV5 Technical Data: Material: durable metal Dimensions: approx. 21 x 14 x 6 cm (L x W x H) Weight: approx. 71 g Mounting: screw-on, 2 screws (not included) Suitable for: corded clippers, not for cordless models Scope of Delivery: 1x Aesculap Clipper Wall Holder GH574C FAQ: Does it fit every clipper model?It fits most corded small-animal clippers, including the Aesculap Favorita II and FAV5. It's not recommended for cordless clippers or very slim models, as they can slip out. Are screws included?No, you'll need two screws of your own to mount it on the wall.

Aesculap Blade Set Stand – Tidy Storage for Your Favorita Blades The Aesculap blade set stand GH575 keeps up to 5 clipper blade sets neatly organised and within easy reach. Perfect for farmers, shearers and anyone using an Aesculap Favorita clipper who wants their blade sets stored safely and ready to grab. Instead of leaving delicate blade sets loose in a drawer or case, the plastic stand holds them upright and protects them from knocks and scratches. That means you always find the right blade quickly when swapping heads out in the barn or on the yard - saving time during a busy shearing session. Overview: Holds up to 5 blade sets, all sorted at a glance Protects delicate blade sets from damage and scratches Keeps blades ready to use right at your workstation Fits Aesculap Favorita blade sets (slide system) Compact and space-saving for barn or shearing kit Easy to clean thanks to smooth plastic finish Technical Data: Dimensions: approx. 16.5 x 7 x 4.5 cm (L x W x H) Weight: approx. 141 g Material: durable plastic, red colour Capacity: 5 blade sets Scope of Delivery: 1x Aesculap blade set stand GH5751x Blade sets not included FAQ: Does this stand fit any Aesculap blade set?It's designed for Aesculap Favorita blade sets with the slide system. Check compatibility first for other blade systems. Are the blade sets included?No, the stand is supplied empty - it's for storage only. How many blade sets fit in the stand?Up to 5 blade sets fit at the same time.