Heck-Pack Game Transport Tray for Tow Bar Carriers, PE Plastic, 100 x 50 x 12,5/17,5 cm

Heck-Pack Rear Carrier Optimal – Stable, Secure, Hot-Dip Galvanized The Heck-Pack Rear Carrier Optimal gets your equipment safely to its destination – whether you're transporting game after a hunt, carrying bikes, or heading off to a campsite. The full hot-dip galvanizing to DIN EN ISO 1461 protects the frame from corrosion for around 30 years, so you can rely on this carrier season after season outdoors.The frame, made from square tubing ST. 37 with a 30/30/2 mm cross-section and a mesh weld tensile strength of 350 – 700 kg, makes this one of the sturdiest road-approved rear carriers on the market. Thanks to ECE type approval, you won't need an MOT inspection or any entry in your vehicle documents – the carrier is approved in more than 60 countries, from the EU to Japan and Australia. For everyday use on the farm, on a hunt, or on the road, the one-hand lever quick-release system is a real advantage: mounted and removed within seconds, without any tools. The carrier is manufactured in Germany, finished cleanly with no sharp edges on the tubing or mesh bars. A padlock for theft protection and two tie-down straps are included, so your load stays firmly secured. Overview: Around 30 years of corrosion protection thanks to full hot-dip galvanizing to DIN EN ISO 1461 High tensile strength of the mesh welds (350 – 700 kg) for secure load transport ECE type approval saves you an MOT inspection and vehicle document entry Tool-free mounting in seconds via one-hand lever quick-release Theft protection with included padlock Manufactured in Germany, clean finish with no sharp edges Technical Data: Frame material: square tubing ST. 37 Cross-section: 30/30/2 mm Mesh size: 50 x 50 x 5 mm Vertical load capacity: 89 kg (71 kg with lowering or folding mechanism) Net weight: approx. 13 kg Screws grade 10.8, nuts grade 10 Radius on the square tube: 2.5 mm Available in 100 x 50 x 12.5 cm, 100 x 50 x 17.5 cm, 100 x 60 x 17.5 cm, 120 x 60 x 17.5 cm Scope of Delivery: 1x Heck-Pack Rear Carrier Optimal, hot-dip galvanized1x Type plate1x ECE road approval certificate1x Information sheet on lighting use1x Padlock for theft protection2x Tie-down straps Questions & Answers: How long does the corrosion protection last?Thanks to the full hot-dip galvanizing to DIN EN ISO 1461, the corrosion protection lasts approximately 30 years.Do I need an MOT inspection for this carrier?No, thanks to the ECE type approval, no MOT inspection or vehicle document entry is required.How quickly can I mount the carrier?Thanks to the one-hand lever quick-release system, it's mounted and removed within seconds, without any tools.

Heck-Pack Rear Carrier Optimal – Secure Transport with Full Road Approval The Heck-Pack Rear Carrier Optimal is the proven choice for hunters and outdoor users who need a stable, legally compliant way to transport gear or game. The hot-dip galvanisation according to DIN EN ISO 1461 delivers corrosion protection for around 30 years, while the matte black powder coating adds extra surface protection against scratches and weather. The welded steel construction offers a tensile strength of the mesh weld points between 350 and 700 kg. With a net payload of 89 kg and road approval in over 60 countries – across the EU as well as Japan and Australia – you're ready for any trip, with no inspection or vehicle registration entry required. The one-hand lever quick-release system lets you mount or remove the carrier in seconds, without tools, making it ideal for everyday use on the farm or in the field. Overview: Hot-dip galvanisation to DIN EN ISO 1461 for long-term corrosion protection Matte black powder coating for extra surface protection Welded steel construction with high tensile strength Net payload 89 kg, 71 kg with lowering or folding mechanism Road approval in over 60 countries, no inspection required One-hand lever quick-release system for tool-free mounting Theft protection with included padlock Technical Specifications: Frame made of square tube ST. 37, cross-section 30/30/2 mm Mesh size 50 x 50 x 5 mm Bolts grade 10.8, nuts grade 10 Net weight approx. 13 kg Type plate and ECE road approval certificate included Delivery Contents: 1x Heck-Pack Rear Carrier Optimal, black powder-coated1x Padlock2x Tie-down straps1x Type plate with ECE road approval certificate Questions & Answers: How long does the corrosion protection last?The hot-dip galvanisation to DIN EN ISO 1461 provides corrosion protection for around 30 years. Do I need a vehicle inspection for this carrier?No, thanks to the road approval valid in over 60 countries, no inspection or vehicle registration entry is required. How quickly can I mount the rear carrier?Thanks to the one-hand lever quick-release system, the carrier is mounted or removed in seconds without tools.

Heck-Pack Number Plate Holder – secure hold for your registration plateThe Heck-Pack number plate holder was designed for mounting on rear carriers used for hunting and leisure trips, ensuring a secure attachment for your vehicle's registration plate. The thick-walled aluminium backing plate provides stability and durability, while the plastic reinforcement protects the plate reliably.The plate is simply inserted into the holder and secured with plastic clips – everything is mounted in no time. Ideal for anyone who needs a fast and tool-free installation, for example when the original plate is covered by a game tray or rear carrier.Overview:Secure hold for your vehicle registration plate on rear carriersThick-walled aluminium backing for high stabilityQuick installation without special toolsDouble fastening with self-locking nutsWeatherproof and durable for long-term useTechnical Data:Material: Plastic with aluminium backing plateCompatible with plates: 462 x 40 x 4 mmWeight: approx. 0.15 kgDelivery Scope:1x Heck-Pack plastic number plate holder1x Aluminium backing plate1x Fastening kit (screws and self-locking nuts)Questions & Answers:How is the plate attached?The plate is inserted into the holder and secured with the plastic clips.Is the holder weatherproof?Yes, the holder is weatherproof and built for continuous use on rear carriers.What plate sizes does the holder fit?It is designed for registration plates measuring 462x40x4 mm, as used on Heck-Pack rear carriers.

Heck-Pack Lighting Unit 13-pin with Aluminium Protection Travelling with a rear carrier means your vehicle lights are often obscured – the Heck-Pack Lighting Unit solves that instantly. Fitted with a 13-pin connector, it provides turn signal, brake, tail, rear fog and number plate lights plus an integrated reflector, so you stay fully visible on the road. The unit arrives completely pre-wired, including mounting materials and bulbs. For daily use on the farm, in the field or on the road, the protective housing is made from durable, thick-walled aluminium chequer plate. The bent aluminium sheets with finely laser-cut recesses are pre-drilled, making installation straightforward. An edge protection strip made from high-quality edge banding guards against knocks while loading and unloading. Official type approval with ECE certification means you stay road-legal. Overview: 13-pin connector for direct vehicle connection Turn signal, brake, tail, rear fog, number plate lights and reflector Completely pre-wired – no electrical know-how needed Robust protection from thick-walled aluminium chequer plate Edge banding protects against impact and loading damage Type approved with ECE European road certification Made in Germany Technical Data: Connector: 13-pin Protection material: Aluminium chequer plate with edge banding Certification: ECE European road approval Dimensions (W x H x L): approx. 20 x 15 x 26 cm Weight: approx. 2.1 kg Manufactured in: Germany Delivery Contents: 1x Heck-Pack Lighting Unit 13-pin1x Aluminium protection1x Mounting materials1x Set of bulbs Questions & Answers: Why do I need the Heck-Pack Lighting Unit?It's needed whenever the vehicle's lights are obscured by the rear carrier, to keep you legally visible on the road. Is the lighting unit easy to install?Yes, it's completely pre-wired and comes with all the mounting materials you need for a straightforward fit. How robust is the aluminium protection?It's made from thick-walled aluminium chequer plate, standing up to knocks, mud and weather during daily use.

Heck-Pack 7-Pin Lighting Set – visible and road-legalThe Heck-Pack 7-pin lighting set keeps your trailer rack fully visible and road-legal at all times. The complete unit with indicator, brake, tail, rear fog and number plate lights meets all legal requirements and is especially designed for vehicles where the standard lights are covered by the rack. This way you stay clearly recognisable on every trip.The electronics are protected by a guard made of thick-walled aluminium chequer plate with folded panels and finely laser-cut cutouts. The high-quality matt black powder coating (RAL9005) and additional edge protection made of cord binding make the lighting robust against stone chips, moisture and knocks during everyday use on the field, yard or road. Thanks to the official ECE approval mark, it is approved for road use across the EU.Overview:Instantly visible thanks to indicator, brake, tail, rear fog and number plate lightsFully pre-wired and ready to connect – saves time during installationRobust protection from thick-walled aluminium chequer plateEdge protection made of high-quality cord bindingECE type-approved for road useMade in Germany for lasting qualityTechnical Data:7-pin lighting unitMaterial: aluminium chequer plate, cord bindingECE European road approvalOrigin: GermanyScope of Delivery:1x Heck-Pack 7-Pin Lighting Set with Aluminium Guard, black1x Mounting materials1x Set of bulbsQuestions & Answers:How do I install the Heck-Pack lighting?The lighting is completely pre-wired and comes with the necessary mounting materials, making installation quick and easy.Is the lighting weatherproof?Yes, the thick-walled aluminium chequer plate and the high-quality powder coating ensure that the lighting functions reliably even in poor weather conditions.When do I need this lighting unit?It is required whenever the standard lights of your vehicle are covered by the trailer rack – this is a legal requirement.