beris Loose Ring

Konnex bar, thinAt last our beris Konnex is also available in sizes 110, 120 and 130 mm! Identical in shape to the Konnex bar thus far, we have now slimmed down the Konnex thin bar in line with the requirements of sport ponies and thoroughbreds. At only 15 mm thick, the thin Konnex bar is just right for pony lips as is the likewise proportionally slimmed down port.The Konnex thin bar is also recommended as a dressage bit for horses and ponies who cannot take a thicker bit in a double bridle with a bridoon.The pony bits are supplied with side parts correspondingly reduced in size!

beris PRIME sets new standards in communication between horse and rider. Due to the correct anatomical shape of the extremely soft mouthpiece, the pressure is equally distributed on the tongue and bars. The integrated oval bit guards with carefully shaped transition to the middle part prevent pinching of the horse‘s lips and additionally provide good lateral support. The loose ring means a greater mobility of the bit in the mouth. The loose ring bit is therefore a bit for horses that prefer a "more mobile" bit in their mouth. The ring runs very evenly in the copper sockets and, due to the better durability, increases the working life of the bit considerably.

Form and function meet design!Our new single and double-jointed plastic mouthpiece is particularly slim in its dimensions - a broad contact surface and low height ensure more comfort in smaller horse mouths.The surface of the plastic is very smooth and slides well in the mouth, even when horses produce little saliva.The mouthpiece lies on the tongue and lips with its broad contact surface and subtly transitions into a smoothly modelled and rotated, fitted olive shape. Pinching of the lips is impossible!The joint and also the central piece is processed very finely and then adapted to the minimal height of the mouthpiece when fitted. The copper sockets fitted into the side olives enable an almost resistance-free, smooth sliding of the bit rings.Single or jointed, both mouthpieces are finely manufactured with the highest degree of skill and are impressive with their delicately modelled transitions.Precision rein management and gentle communication verging on the ideal with the new single- and double-jointed beris bits!

Our new single - and double -jointed plastic mouthpiece is particularly slim in its dimensions - broad contact areas and a low height ensure more comfort even in smaller horse mouths. The surface of the plastic is very smooth and slides well in the mouth, even with horses that produce little saliva. The mouthpiece lies on the tongue and lips with its broad contact surface and, with its smooth profile, subtly merges into a rotated, fitted, olive shape. The joints and middle piece are finely worked, and assembled so as to match the low height of the mouthpiece. We guarantee that the bit rings slide smoothly as a result of the incorporated copper sockets.Precision rein management and subtle communication close to the ideal with the new single- and double-jointed bits from beris!

Identical in shape to the Comfort Bar, just the thickness is a lot thinner at 15 mm. This makes the bit an ideal one for ponies and horses with limited room in their mouths. Very successful in use as a dressage bit on horses for whose mouth a thick Weymouth bit and bradoon would be too much.

Horses accept leather bits exceptionally well. Leather is a purely natural product, it promotes chewing and also the flow of saliva. The bit slides easily in the mouth thereby increasing well being. The processed leather has been vegetable-tanned and hand stitched. When moistened, the anatomically pre-shaped bit adjusts perfectly to the anatomy of the horse"s mouth. Our leather mouthpiece is particularly well suited to young and highly sensitive horses. Even horses that generally dislike bits in their mouth mostly like a leather bit and can re-learn a trusting acceptance of the bit. The loose ring means that the bit moves more in the mouth. The loose ring snaffle is therefore a bit for horses who prefer a more mobile bit. The ring runs very smoothly in the copper sockets, and the resulting better durability increases the life of the bit. In choosing the bit, one can also address the horse"s requirements.

This anatomically correct bit sits lightly and evenly on tongue and bars and provides more room and freedom of movement for the tongue. When the reins are taken up, pressure is applied evenly on tongue and bars. A lateral squeezing of tongue and bars will not take place. Bit guards prevent pinching of the lips. Thanks to its slightly curved shape, the comfort bar sits very still in the horse"s mouth. Bits with a slightly curved bar are considered to be particularly gentle and kind to the mouth. This property, in combination with our beris plastic, enables the horse and rider to communicate with each other in an easier and more gentle way. The comfort bar is especially suitable for young and sensitive horses. The loose ring means that the bit is more mobile in the mouth. The loose ring snaffle is meant for horses who prefer this extra ´mobility´ in a bit. The ring runs very smoothly in the copper sockets, the resulting better durability leads to an increased lifespan for the bit.

Identical in shape to the Comfort Bar, just the thickness at 15 mm is a lot thinner. This makes the bit ideal for ponies and horses with limited room in their mouths. Very successful in use as dressage bit on horses whose mouth cannot take a thick Weymouth and bradoon.

The tongue port bar has a specially flattened shape to the port. This means the tongue has an optimum amount of room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to put the tongue over the bit, as the port effectively prevents this. Therefore this bit is eminently suitable for horses that do not tolerate conventionally shaped bits due to the pressure on the tongue and react with head-tossing and the like. The loose ring means a greater mobility of the bit in the mouth. This snaffle bit is therefore a bit for horses that prefer a "more mobile" bit in their mouth. The ring runs very evenly in the copper sockets and, due to the better durability, increases the working life of the bit considerably.

The tongue port bar has a particular flattened form to the port. This gives the tongue an optimum amount of room. Many horses respond to this with improved suppleness and increased chewing. And yet this bit is also well suited to horses that play with their tongues, trying to put the tongue over the bit, as the port effectively prevents this. Therefore this bit is perfect for horses that do not tolerate conventionally shaped bits due to the pressure on the tongue and react with head-tossing and the like. The loose ring means a greater mobility of the bit in the mouth. The loose ring bit is therefore a bit for horses that prefer a "more mobile" bit in their mouth. The ring runs very evenly in the copper sockets and, due to the better durability, increases the working life of the bit considerably.

The KONNEX bit combines the effect of a ported bar and the positive characteristics of the butterfly bar. The profile of the beris KONNEX bar is slimmer, it positions itself very comfortably in the horse’s mouth, provides more room and the port is also clearly wider in the beris KONNEX bar. It is suitable for horses with little space in their mouth, e.g. thoroughbred type horses, or older horses (due to changes in dentition), horses with larger tongues and especially ones that cannot tolerate too much pressure on parts of the tongue. The loose ring means a greater mobility of the bit in the mouth. The snaffle bit is therefore a bit for horses that prefer a "more mobile" bit in their mouth. The ring runs very evenly in the copper sockets and, due to the better durability, increases the working life of the bit considerably.

This anatomically correct bit sits lightly and evenly on tongue and bars, and provides more room and freedom of movement for the tongue. When the reins are taken up, pressure is applied evenly on tongue and the bars of the lower jaw. A lateral squeezing of tongue and bars will not take place. Bit guards prevent pinching of the lips. Thanks to its slightly curved shape, the comfort bar sits very still in the horse"s mouth. Bits with a slightly curved bar are considered to be particularly gentle and kind to the mouth. This property, in combination with our beris plastic, enables the horse and rider to communicate with each other in an easier and more gentle way. The comfort bar is especially suitable for young and sensitive horses. The loose ring means that the bit is more mobile in the mouth. The loose ring snaffle is meant for horses who prefer this extra ´mobility´ in a bit. The ring runs very smoothly in the copper sockets, the resulting better durability leads to an increased lifespan for the bit.

The butterfly bar represents an absolute innovation in the field of mouthpieces. The anatomically correct shape combined with a broader surface in the tongue area creates the optimum amount of room for this very important and sensitive muscle with the possibility of a very gentle effect. Horses show they are feeling at ease by increased chewing and more acceptance of the bit. If a stronger effect on the horse‘s mouth is needed, the angulation of the bit in the mouth can be altered with a sidepiece that acts as a lever. The resulting increased pressure on specific points can then achieve the communication desired. When the pressure is reduced, the butterfly bar reverts immediately to the comfortable position. The loose ring means greater mobility of the bit in the mouth. This bit is therefore meant for horses who prefer a "more mobile" in the mouth. The ring runs very evenly in its copper sockets and this increases the lifespan of the bit substantially.