Buy heated drinking troughs for livestock: Frost-proof in winter

Agrarzone Heated Drinking Trough with Tube Valve - Drinking Trough for Horses & Cattle The drinking trough with integrated heating cable and automatic frost protection thermostat is kept optimally frost-free in winter. The heatable cattle and horse drinker made of high-quality plastic keeps the drinking water ice-free even at minus temperatures. The drinking trough has an integrated and easily replaceable 31 Watt heating cable. The automatic frost protection thermostat, which is also integrated, switches the heating cable on at +3 °C and off again at approx. +13 °C. This prevents frost from forming and keeps the drinking water free of ice. This prevents frost from forming and ensures a reliable flow of water even at sub-zero temperatures of up to approx. -25 °C.  The cover on the underside of the drinking trough and the closed design in the area of the valve inlet have an insulating effect and prevent the heat given off by the heating cable from escaping. The heated pasture drinker from Agrarzone is suitable for circulation heating systems and has an adjustable water flow with up to 11 litres/minute at 3 bar. The self-watering trough has a ½-inch connection at the top and bottom and promises easy pipe or wall mounting. It is equipped with a drain plug for easy and quick cleaning. The extremely high-quality, break- and shock-resistant plastic material (PP) can withstand very heavy use. Overview: Drinking basin with integrated 31 W heating cable Frost-proof down to approx. -25 °C Heating cable easy to replace Integrated frost protection thermostat Suitable for circulation heating systems Adjustable water flow (up to 11 litres/minute) Shatterproof and impact-resistant plastic Smooth-running brass pipe valve ½-inch connection from above and below With drain plug for easy cleaning For wall and pipe mounting Technical data: Voltage: 230 Volt Heating capacity: 31 watts (for heating the drinking bowl and valve) Water connection: G1/2" (connection possible from above or below) Water output: max. 11 l/min at 3 bar Basin width: 25,2 cm Basin depth: 31,6 cm Capacity: approx. 2,8 litres Weight: 2,07 kg Colour: green Scope of Delivery: 1x Agrarzone Heated Drinker Thermo Plus 31 W 1x Valve 1x Instruction manual

Agrarzone Heated Drinker with Pipe Heater for Horses & Cattle The drinking bowl has an integrated heating cable, pipe trace heating and a frost protection thermostat. This keeps the drinking trough ice-free at up to -25 degrees. The heatable cattle and horse drinker made of high-quality plastic is frost-proof down to approx. -25 °C. The drinking trough has an integrated and easily replaceable heating cable and an additional heating cable for an approx. 2 metre long pipe. The likewise integrated, external frost protection thermostat switches on the heating cable at +3 °C and off again at approx. +13 °C. The cover on the underside of the drinking bowl and the closed construction in the area of the valve inlet have an insulating effect and prevent the heat given off by the heating cable from escaping. The heated 230 volt grazing trough from Agrarzone is suitable for circulation heating systems and has an adjustable water flow of up to 11 litres/minute. It has a ½-inch connection at the top and bottom and promises easy pipe or wall mounting. The self-drinker with pipe valve is equipped with a drain plug for easy and quick cleaning. The drinker is made of break- and shock-resistant plastic (PP) and is therefore also suitable for heavy use. Overview: Drinking trough with integrated 73 W heating cable Frost-proof down to approx. -25 °C Heating cable easy to replace With pipe trace heating Integrated frost protection thermostat Suitable for circulation heating systems Adjustable water flow (up to 11 litres/minute) Break and shock resistant plastic Smooth-running brass pipe valve ½-inch connection from above and below With drain plug for easy cleaning For wall and pipe mounting Technical data: Voltage: 230 Volt Heating capacity: 73 watts (for heating drinking bowl and valve) Water connection: G1/2" (connection possible from above and below) Water output: max. 11 l/min at 3 bar, adjustable Basin with: 25,2 cm Basin Depth: 31,6 cm Capacity: approx. 2,8 litres Weight: 2,07 kg Colour: green Scope of delivery: 1x Agrarzone Heated drinker Thermo Plus 73 W 1x Valve 1x Pipe Heater (heating cable for approx. 2 metres of pipe) 1x Instruction manual

Agrarzone Heated Floating Drinking Trough - Drinking Trough for Horses & Cattle Fresh water for your animals even in winter with the heated drinking basin from Agrarzone. Keeps the water frost-free at temperatures below zero. The heatable float drinker provides fresh drinking water even in winter. The drinker has an integrated and easily replaceable 31 Watt heating cable and an automatic frost protection thermostat. The thermostat switches the heating cable on at +3 °C and off again at approx. +13 °C. This prevents frost from forming and keeps the water fresh. This prevents frost from forming and ensures a reliable water flow even at sub-zero temperatures of up to approx. -15 °C. The cover on the underside of the drinking bowl and the closed design in the area of the valve inlet have an insulating effect and prevent the heat given off by the heating cable from escaping. The heatable 230 volt cattle and horse drinker from Agrarzone is suitable for circulation heating systems and has an adjustable water flow of up to 6 litres/minute at 3 bar. It has a ½-inch connection on the left and right and promises easy pipe or wall mounting. The high-quality plastic is optimised for extreme breakage and impact resistance and suitable for heavy use. The drain plug ensures easy and quick cleaning. With valve Art. 20954 (not included), the float drinker is also suitable for connection to low-pressure pipes. Overview: Float drinker with integrated 31 W heating cable Reliable frost protection down to approx. -15 °C Integrated frost protection thermostat Heating cable easily replaceable Suitable for circulation heating systems Adjustable water flow (up to 6 litres/minute at 3 bar) Drinking basin made of break- and shock-resistant polypropylene Connection possible from the left or right Valve cover with snap-on hook for quick access With drain plug for easy cleaning For wall and pipe mounting Technical data: Voltage: 230 Volts Heating capacity: 31 watts (for heating the drinking bowl and valve) Water connection: G1/2" (connection possible from left or right) Water output: max. 6 l/min at 3 bar Basin width: 29,5 cm Basin depth: 34 cm Capacity: approx. 5 litres Weight: 2,7 kg Colour: green Scope of delivery: 1x Agrarzone Heated Float Drinker Thermo Plus 31 W 1x Valve 1x Instruction manual

Agrarzone Heated Float Drinker with Pipe Heater for Horses & Cattle Fresh water for your animals even in winter with the heated float drinker from Agrarzone. Keeps the water frost-free at temperatures below zero. The heatable float drinker provides fresh drinking water even in winter. The drinking bowl has an integrated and easily replaceable heating cable and an additional heating cable for an approx. 2 metre long pipe. A frost protection thermostat switches the heating cable on at +3 °C and off again at approx. +13 °C. This prevents frost from forming and ensures a reliable water flow even at sub-zero temperatures of up to approx. -15 °C. The cover on the underside of the drinking bowl and the closed design in the area of the valve inlet have an insulating effect and prevent the heat given off by the heating cable from escaping. The heatable 230 volt cattle and horse drinker from Agrarzone is suitable for circulation heating systems and has an adjustable water flow of up to 6 litres/minute at 3 bar. It has a ½-inch connection on the left and right and promises easy pipe or wall mounting. The high-quality plastic is optimised for extreme breakage and impact resistance and is suitable for heavy use. The drain plug ensures easy and quick cleaning. With valve Art. 20954 (not included), the float drinker is also suitable for connection to low-pressure pipes. Overview: Float drinker with integrated 73 W heating cable Reliable frost protection down to approx. -15 °C Integrated frost protection thermostat Heating cable easily replaceable With pipe trace heating Suitable for circulation heating systems Adjustable water flow (up to 6 litres/minute at 3 bar) Drinking basin made of break- and shock-resistant polypropylene Connection possible from the left or right Valve cover with snap-on hook for quick access With drain plug for easy cleaning For wall and pipe mounting Technical data: Voltage: 230 Volts Heating capacity: 73 watts (for heating the drinking bowl and valve) Water connection: G1/2" (connection possible from left or right) Water output: max. 6 l/min at 3 bar Basin width: 29,5 cm Basin depth: 34 cm Capacity: approx. 5 litres Weight: 2.7 kg Colour: green Scope of delivery: 1x Agrarzone Heated Float Drinker Thermo Plus 73 W 1x Valve 1x Pipe heater (heating cable for approx. 2 metres of pipe) 1x Instruction manual

Stainless Steel Trough Waterer Cattle & Horse Waterer for Stable and Pasture Fresh, clean water with the large trough drinker for cattle and horses. Optionally available with heating for frost protection down to - 15 °C! The Kerbl cattle and horse trough drinker made of high-quality stainless steel is optimally suited for circulation heating systems and equipped with a drain plug for easy and quick cleaning. The self-watering trough has a ½-inch connection at the top and bottom and is suitable for wall mounting. In addition, the drinker can be extended with a heating cable (item no. 27345), making the animal drinker frost-proof down to approx. -15 °C. The model with heating already has an easily replaceable 24 V heating cable with 100 W integrated. The enclosed design in the area of the valve inlet has an insulating effect and prevents the heat given off by the heating coil from escaping. A integrated thermostat automatically regulates the heat output. The prevents frost formation and the water can flow down to a temperature of approx. - 15 °C. overview: Clean water for horses and cattle Suitable for circulation heating systems trough with float valve, ½" connection Optionally heatable: frost protection down to approx. - 15 °C 2 inch water drain centered below Ideal for wall mounting Made of stainless steel, therefore very durable Brand quality from Germany technical data: Dimensions (W x D x H: 61 x 42.5 x 28,5 cm Capacity: 35 l Flow rate: 35 l/min at 3 bar / Up to max. 6 bar without pressure reducer Water connection: G 1/2" Models: Trough drinker stainless steel with heating 60 x 42,5 x 29 cm 35 L Trough drinker stainless steel without heating 60 x 42,5 x 29 cm 35 L

plastic safe 24 V operation with power pack for connection to a 230 V supply cable length: 2 m PU insulation for targeted heat dissipation upwards with slip-proof feet to ensure a secure stand for the heating plate with antislip stripes on the top to ensure a secure stand for the bowls

Antifreeze Thermostat - for bowl and tube heating systems The frost protection thermostat turn only on if necessary! This antifreeze thermostat is suitable for all bowl and ptube heating systems. The external probe ensures automatic switching on and off. The thermostat has IP54 protection and is ideal for use in a stable in a splash-proof housing. Due to the freely adjustable trigger temperature, the frost protection installation heats up only when it is necessary. Overview: for all bowl and tube heating systems External probe for automatic switching on and off trigger temperatur can be freely selected splash-proof housing protection class IP 54 max. permitted power 3.6 kW antifreeze thermostat is not switched on if there is no risk of frost Note: The antifreeze thermostat should be installed in the coldest place. Delivery: 1x Antifreeze Thermostat

Heatable float drinking bowl SH30 - with integrated heating cable The heated float bowl can be connected to high and low pressure. The drinking bowl SH30 is made of high quality plastic and contains an integrated, exchangeable heating cable. Thanks to the practical float valve, the horse and cattle drinker can not only be connected to a normal water pipe, but can also easily be connected to a water tank. The external frost protection thermostat also switches on at +5 ° C and switches off at approx. +13 ° C. The cover on the underside of the basin prevents heat from being released from the heating cable. The valve cover with snap hooks of the heated animal drinkers ensures quick access and through the drain plug, the self-drains can be cleaned quickly and easily. The drinking bowl with float is suitable for circulation heating systems and has a water flow of 6.5 l / min. Kerbl's self-heating self-drawer has a ½-inch connection on the left and right and is suitable for pipe and wall mounting. The frost-proof float drier is available with two voltages (230 V or 24 V) and optionally with auxiliary pipe heating. The drinking bowl is frost-proof to about -15 ° C. Overview: drinking bowl made of high quality plastic (PP) integrated frost protection thermostat (switch-on temperature approx. +5 ° C, switch-off temperature approx. +13 ° C) heating cable easily exchangeable suitable for circulation heating systems valve cover with snap hook for quick access volume: 5 l water flow: approx. 6.5 l / min (2-3 bar) sater connection 1/2 "from left and right possible incl. Drain plug for easy cleaning suitable for wall and pipe mounting weight: 2.7 kg Models: drinking bowl with pipe heating, 73 watts, 24 volts drinking bowl with pipe heating, 73 watts, 230 volts drinking bowl without pipe heating, 31 watts, 24 volts drinking bowl without pipe heating, 31 Watt, 230 Volt Note: For the 24 V version a transformer is required (not included!) Delivery: 1x heatable float bowl SH30 1x user manual Optional: 1x pipe heating (heating cable for approx. 2 meters of pipeline)

Frost protection heating cable with thermostat 230 V Antifreeze heating pipe allows the water to flow in the winter. This antifreeze heating cable with thermostat keeps your water pipe up to max. -45 ° C frost-free. This heating pipe for watering bowls prevents the formation of birds. Protect the area that the animals can nibble on with an additional protection against the bite! This heating cable has an integrated frost protection thermostat (switch-on temperature approx. +5 ° C, switch-off temperature approx. +13 ° C) and is not suitable for heating pipes. For additional insulation do not insulate the thermostat! Overview of frost protection heating cable: Prevent freezing of water piping Thermostat in the heating cable switches on the cable automatically For heating the stub of drinking bowls keeps your water line frost-free to -45 °C  integrated frost-protection thermostat (switch-on temperature approx. +5 °C, switch-off temperature approx. +13 °C)  do not use on heating pipes when insulated additionally, please do not insulate the thermostat Do not mount where animals can reach!  IPX7 VDE tested What should be considered with 230 V heating cables: Always install the heating cable at the bottom of the pipe Water pipe must be earthed 230 V heating cables are ready to plug in and connect to a power supply with circuit breaker (RCCB 30 mA) Heating cables must not be shortened, already ordered in the correct length Rest lengths can be wrapped in turns around the pipe Do not bend the heating cable and set the max. Note bending radius of approx. 50 mm Heating cables can be attached to the pipe with insulating tape or with aluminum tape When used on plastic pipes, the pipe must be wrapped with aluminum tape before laying the heating cable Insulate the pipeline and the heating cable with insulation of min. 13 mm Install the thermostat of the heating cable in the coldest position of the pipe Thermostat may only be moderately insulated Do not use 230V heating cables in the biting area of ??animals Installation must be carried out in accordance with VDE0100 by a qualified specialist Do not mount unprotected in the bite area of ??animals - use only 24 volt heating cables! Heating cable must not be shortened! Length: 1 m, Watt at 0 ° C = 16 W 2 m, watts at 0 ° C = 32 W 4 m, Watt at 0 ° C = 64 W 8 m, watts at 0 ° C = 128 W. 12 m, Watt at 0 ° C = 192 W 14 m, Watt at 0 ° C = 224 W 18 m, Watt at 0 ° C = 288 W 24 m, Watt at 0 ° C = 384 W 37 m, watts at 0 ° C = 592 W. 49 m, watts at 0 ° C = 784 W. Delivery: 1x frost protection heating cable with thermostat, 230 V

Protective bracket for drinking bowls - Robust impact protection for your drinking bowl The protective bracket made of hot-dip galvanised steel not only protects the drinking bowl from damage, but also your animals from injury! With the protective bracket made of hot-dip galvanised steel tubing, your drinking trough is optimally protected against knocks and kicks. This increases the service life of the drinking trough many times over. The bracket also protects the animals, as the impact protection prevents injuries to the (possibly already damaged) drinking trough. The bracket can be screwed directly to the wall, is available in three sizes and is therefore suitable for various tube valve, tongue valve & float valve drinkers. At a glance: Prevents damage to the drinking bowl protects the animals from injuries Protection bracket made of hot-dip galvanised steel tube Available in 3 sizes for different drinkers Long-lasting and robust impact protection Easy to mount on the wall Size S: Width: 24 cm Depth: 30 cm Height incl. mounting plate: 20 cm Suitable for these Kerbl drinking bowls: 22360, 22375, 22378, 22465, 22466, 22500, 22504, 221000, 221851, 221500, 221600, 221853, 221870, 221871, 221874, 222000, 222005, 222010, 222020, 222030, 222500, 222709 Size M: Width: 29 cm Depth: 34 cm Height incl. mounting plate: 20 cm Suitable for these Kerbl drinking bowls: 221860, 2218605, 221875, 221876, 222040, 222045, 222050, 222055, 22445, 22355, 225030, 225031, 225032, 225033, 225035, 222070, 222062, 222063, 222064, 222065 Size L: Width: 41 cm Depth: 36.3 cm Height incl. mounting plates: 22 cm Suitable for these Kerbl drinking bowls: 222070, 222062, 222063, 222064, 222065, 22195 Scope of delivery: 1x Protective bracket for drinking bowls made of hot-dip galvanised steel Screws not included in delivery

Transformer for trough heating This transformer for trough heating transforms the voltage from 230 volts to 24 volts. These transformers are suitable for all frost-free water bowls and convert the voltage from 230 volts to 24 volts. The transformer for the trough heater is suitable for all frost-free drinking bowls. Short-circuit and overload protection, as well as an integrated temperature limiter are just a few advantages of the transformer. In order to avoid unnecessary retrofitting of your transformers, it is necessary to act proactively when buying. The number and power consumption of the planned heated drinkers and heating cables should be taken into account. Overview: Short-circuit and overload protection by easily replaceable motor vehicle fuse in the output circuit Suitable for all frost-free drinking bowls The transformers are additionally protected against overheating by an integrated temperature limiter (automatic reset after cooling) IP 65 (transformer) / IP 20 (connection) Which transformer is to be chosen? If you want to operate a drinking bowl with 80 W power (P), a transformer with 100 W is sufficient. If you also want to connect a heating cable with 24 V, you simply add the power consumption (= wattage) of the cable. Also consider the loss of power due to supply lines (see calculation example). This gives you the required minimum power of the transformer. Do not measure the transformer too precisely to have a buffer for extensions. Calculation example for transformer: 5 x drinking bowls with power consumption 100 watts = 500 watts 4 x frost protection heating cable 24 V each with 30 watts = 120 watts 1 x antifreeze heating cable 24 V each 15 watts = 15 watts = Total power consumption 635 watts Consideration of line losses (flat rate 15%) 635 watts x 1.15 = 730 watts In this example, two transformers with 400 watts each should be selected. Models: Transformer 100 VA Transformer 200 VA Transformer 300 VA Transformer 400 VA Delivery: 1x transformer for trough heating

Length:  100 m Width: 50 mm to reflect the heat on water pipes for a 3/4“ pipe of 3.5 m length approx. 25 m of aluminium tape is necessary

Kerbl Thermal Trough Duo - for horse and cattle for supplying water to up to 30 animals volumes: 100 l incl. float valve with water flow rate of up to 35 l/min no power connection required excellent insulation thanks to double wall with thermal foam filling freedom from frost thanks to continuous flowing water constant water temperature pleasant at any time of year for animals (approx. 3 to 5 °C in winter, approx. 10 to 12 °C in summer) rapid draining and rinsing thanks to 2 large outlet openings of diameter 100 mm ½" connection closed housing prevents soiling and ensures maximum water hygiene incl. ground seals, replacement gaskets for the float valve and drain stop, flexible stainless steel hose, pipe insulation, floor anchor Technical data: Size: 108,5 x 70 x 52,5 cm (LxWxH) Weight: 40 kg

Small animal bowls NoFrost Superior 2.0 - keeps water free from frost to minus 20 degrees The drinking container can also be heated (8 watts), so that no ice layer deposits there. Now you never have to worry about your beloved pet having to go without drinking water during the frost. Of course, it is also advisable here to renew the water regularly, as you are used to it. Overview: Made of sturdy plastic Bottle double-walled isolated Keeps the water frost-free to minus 20 degrees Coordinated power distribution of the heating in the drinking bowl and in the bottle area Insulated floor for optimal heat distribution 8 Watt heating element integrated in the shell With power supply for connection to a 230 Volt power supply Safe 24 Volt operation Easy handling, as connection cable can be disconnected from the potion by means of plug Cable length: 1.5 m Incl. Wire holder for easy installation and removal of the potions Suitable for all common wire mesh Incl. operation manual Note: Easy filling of the bottle by screw cap, no spilling of the water possible Content: 330 ml Delivery: 1 small animal cabinets NoFrost Superior 2.0

The water bowl HP20 with integrated heating cable and frost-protection thermostat is optimally kept frost-free in winter! Here you will find a heated cattle and horse water bowl made of high-quality plastic (PP) with integrated and easily replaceable heating cable. The integrated frost-protection thermostat switches on at +5 °C and switches off again at approx. +13 °C. The cover on the bottom of the basin and the closed construction in the area of ??the valve inlet have an insulating effect and prevent the heat emitted by the heating cable from escaping. The heated bowl is suitable for circulation heating systems and is equipped with a drain plug for easy and quick cleaning. The Kerbl self-heating self-trough has a ½-inch top and bottom connection and is suitable for pipe and wall mounting. The frost-proof water bowl is available with two voltages (230 V or 24 V) and optionally with a pipe heating system. The heatable animal cabinets are frost-proof up to about -25 ° C. Overview: water bowl made of high quality plastic (PP) with integrated heating cable heating cable easily exchangeable Iintegrated frost protection thermostat smooth pipe valve made of brass adjustable water flow (up to 11 liters / minute) ½-inch connection from above and below for wall and pipe mounting incl. drain plug suitable for circulation heating systems optional: auxiliary pipe heating (approx. 2 meters) Dimensions: weight: about 2 kg bowl volume: 2.8 liters Models: water bowl with auxiliary pipe heating, 73 watts, 24 volts water bowl with auxiliary pipe heating, 73 watts, 230 volts water bowl without pipe heating, 31 watts, 24 volts water bowl without pipe heating, 31 Watt, 230 volts Note: For the 24 V version a transformer is required (not included!) Delivery: 1x heatable plastic water bowl with pipe valve HP20 1x valve 1x user manual Optional: 1x auxiliary pipe heating (heating cable for approx. 2 meters of pipeline)

Heatable water bowl H10 with tube valve 24 V, 80 W self-watering system for horses and cattle The heatable horse drinkers / beef drinker made of sturdy cast iron remains frost-free, even at temperatures down to -20 ° C. The heatable water bowl made of high quality gray cast iron is available with a heating capacity of approx. 80W. Through the tube valve, the water flow rate can be regulated and is heated, so this is optimally kept free of frost. Even with up to -20 C °! The self-draining device is easy to install, the valve does not need to be removed for installation. The frost-proof horse drink / cattle drinker is suitable for tube and wall mounting and can be connected at top and bottom with G1 / 2" internal thread. The power supply is guaranteed by a transformer of at least 100 W (not included in the delivery!) and a power connection by an external terminal box and is suitable for circulation heating systems. Overview: heatable self-trough, 80 W gray cast iron, black enamelled weight 11.5 kg bowl Capacity 1.6 liters water flow rate can be regulated  heating valve sonnection at top and bottom possible G1 / 2" internal thread suitable for pipe and wall mounting suitable for circulation heating systems simple power connection through external terminal box frost-resistant to approx. -20 °C Delivery: 1x Heated drinking bowl H10 with pipe valve 24 V, 80 W Which transformer is to be chosen? If you want to operate a drinking bowl with 80 watts of power, a transformer with 100 watts is sufficient. If you also want to connect a heating cable with 24 volts, simply add the power consumption (= wattage) of the cable. In the case of transformer selection, plan for a buffer of 15% as reserve.

Spare pump for Grundfos circulation pumpReplacement pump and Grundfos for circulation pump/ heat pump.Replacement pump suitable for heat pump. The product images may differ from the actual product and are for illustration purposes only. No liability can be accepted for any display errors.undnbsp;anddnbsp;anddnbsp;anddnbsp;

Frost protection heating cable for gutters and pipes The plug-in frost protection heating cable keeps gutters and pipes free of frost. The plug-in heating cable developed for gutter and piping fulfills the requirements for strength class M2 according to IEC60800: 2009 in order to keep gutters and piping safely frost-free. Thanks to the high heating output of 20 watts per meter, the heating cable keeps gutters, downpipes and pipes free of frost even at very low temperatures. The integrated temperature switch reliably switches the heating cable on at a temperature of +3 ° C and off again at +12 ° C. Overview of antifreeze heating cables for gutters and pipes: Suitable for gutters: strength class M2 Plug-in heating cable for easy installation Integrated thermostat for energy-saving use High protection class: IPX7 Suitable for metal water pipes Incl. Earthing contact plug for high security Length of connecting cable: 2 m IPX7 Protection class: I Note: Please note that each heating cable connection must be protected by a separate FI circuit breaker. (e.g. Art. No. 27598, pluggable personal protection switch) The heating cable is in front of sharp edges, e.g. Protect at the transition from gutter to downpipe using edge protection (Art. No. 27597). The heating cable must never touch, overlap or cross another heating cable. In order to rule out contact permanently, the use of suitable spacers is recommended (Art. No. 27596). Pipes, metal gutters, protective pipes and metal sheaths must be earthed before laying for safety reasons. Diameter: 6 mm Sizes: Watt (length) 100 W (5 m) 200 W (10 m) 300 W (15 m) 400 W (20 m) 500 W (25 m) 800 W (40 m) 1000 W (50 m) Content: 1 anti-freeze heating cable for gutters and pipes

heatable water bowl with durable tube valve fully enamelled drinking bowl made of cast iron for tube or wall mounting adjustable water level from outside (no need to remove the valve) frost-protected down to about –15 °C power supply via transformer at least 100 W (not supplied) connection from below or above 1/2 thermic output 80 watts

Hotplate rubber for poultry waterer and rabbit hutch for keeping bowls frost-free and maintaining nest warmth safe 24 V operation with power pack for connection to a 230 V power supply slip-proof stand for various types of bowl robust and weather-resistant (IP X7) 18 Watt cable length: 2 m protection class III Size: 24 x 24 x 0.8 cm

The Thermal Bowl UNO is for supplying water to up to 15 animals volumes: 40 l incl. float valve with water flow rate of up to 35 l/min no power connection required excellent insulation thanks to double wall with thermal foam filling freedom from frost thanks to continuous flowing water constant water temperature pleasant at any time of year for animals (approx. 3 to 5 °C in winter, approx. 10 to 12 °C in summer) rapid draining and rinsing thanks to large outlet openings of diameter 100 mm ½" connection closed housing prevents soiling and ensures maximum water hygiene incl. ground seals, replacement gaskets for the float valve and drain stop, flexible stainless steel hose, pipe insulation, floor anchor

Drinking Bowl Lakcho - heated watering bowl for cattle Drinking Bowl LACHKO, 50 W, frost-free to -20 ° C, with float valve Electrically heated drinking bowl made of polyethylene with float valve. The animal is thus always enough water available. Thanks to the additional electric heating, the water does not freeze in winter. Heating power 50 watts at 24 volt operation. Suitable for mounting on polyethylene base (Item No. 222715 or 222716) or concrete pipe with 300 mm internal diameter. Connection 1/2 "from below with stainless steel hose (included in delivery). Lamp indicating the operating condition.The heating bath is suitable for 15 large cattle. Overview: electrically heated drinking bowl made of polyethylene with float valve Heating power 50 watts 24-volt operation Suitable for mounting on polyethylene base (Item No. 222715 or 222716) or concrete pipe with 300 mm internal diameter 1/2 "connection from below with stainless steel hose (included) Control lamp to indicate the operating status suitable for 15 large cattle Note: to operate with transformer (not included!) Delivery: 1x water bowl heatable Lakcho

Stand for drinking bowls 30x40cm The practical increase for your heatable potions. The heated drinking bowls with valve tongue (Stalcho) or float valve (Lakcho) can thus be attached increased. The electrically heated drinking bowl provides your animals daily in the winter with fresh water. Overview: made of high quality polyethylene (PE) for screwing or setting in concrete suitable for heatable drinking bowls STALCHO and LAKCHO Delivery: 1x stand for water bowl 30x40 cm

5x Spacer for Heating cable incl. 10 cable ties The heating cable must not touch, cross or overlap itself or another heating cable at any point. To permanently prevent contact, these 5 spacers are ideal. The spacers ensure that the heating cable is guided safely without any points of contact. The spacers are very easy to mount with the 10 cable ties. Thanks to the holes in the spacers, the heating cable is fixed and cannot slip. At a glance: Guarantees secure guidance of the heating cable Prevents the heating cable from touching For heating cables, frost protection cables of all kinds (like item no. 26592) 10 Pieces of cable ties enable easy mounting Scope of delivery: 5x Spacer for Heating cable incl. 10 cable ties