Kerbl Heated Float Drinking Bowl SH30, Frost-Resistant, without Rohrbegleitheizung 31W 24V

Frost-protection heating cable with thermostat 230 VThis frost-protection heating cable with thermostat keeps your water pipe frost-free down to max. -45°C, so drinking bowls and supply pipes keep working right through winter. As a pipe trace heating cable, it reliably prevents water pipes from freezing and protects you from costly frost damage.The built-in thermostat automatically switches the cable on at approx. +3°C and off again at approx. +13°C, so there's no need for manual monitoring. The cable is designed for heating the branch pipe of drinking troughs and is not suitable for central heating pipes. In areas animals can reach, fit an additional bite guard. If you add extra insulation around the pipe, do not insulate the thermostat itself, so it can measure the temperature accurately.Overview:Prevents water pipes from freezingIntegrated thermostat switches the cable on and off automaticallyIdeal for heating the branch pipe of drinking troughsKeeps water pipes frost-free down to max. -45°CPlug-and-play, connects to a power supply with RCD (30 mA)High protection rating IPX7 for damp stable environmentsVDE tested (except the 49 m version)Technical details:Voltage: 230 VSwitch-on temperature: approx. +3°CSwitch-off temperature: approx. +13°CProtection rating: IPX7Connection cable length: 2 mMechanical strength class M1 (not suitable for gutters or mechanically stressed applications)Maximum bending radius: approx. 50 mmMinimum insulation of pipe and cable: 13 mmDelivery contents:1x frost-protection heating cable with thermostat, 230 VFAQ:Can I shorten the cable if I need a shorter length?No, the heating cable must never be shortened. Order the correct length in advance; any excess length can be wound in loops around the pipe.Is the cable suitable for areas animals can bite?No, never fit a 230V cable unprotected where animals can reach it. Use only 24-volt heating cables there or fit an additional bite guard.Does the thermostat need to be insulated too?No, if you insulate the pipe further, only insulate the thermostat moderately or not at all so it can measure the temperature correctly.Length & Power Consumption:1 m, 16 W at 0 °C2 m, 32 W at 0 °C4 m, 64 W at 0 °C8 m, 128 W at 0 °C12 m, 192 W at 0 °C14 m, 224 W at 0 °C18 m, 288 W at 0 °C24 m, 384 W at 0 °C37 m, 592 W at 0 °C49 m, 784 W at 0 °CDo not install unprotected within reach of animals' teeth – use only 24-volt heating cable here! The heating cable must not be shortened!

Pipe mounting bracket, in pairs - for Kerbl water bowls With the mounting bracket, the potions can be attached directly to the pipe! The drinking basin can be attached directly to the pipe with the mounting brackets. Due to the different screws included in the scope of supply, the drinking bowl can be attached to pipes with a diameter of 30 to 120 mm. The required nut and washers are included. Overview: mounting bracket, 2 pieces cast iron, enamelled suitable for Kerbl potions diameter from 30 to 120 mm easy screw mounting Delivery: 2x mounting bracket 4x screws, 120 mm 4x screws, 80 mm 4x screws, 50 mm 4x washers 4x stop nuts

Replacement float valve - for conversion to low pressure Overview: float valve for low pressure connection 1/2 "brass connection water flow 4 liters / min Suitable for the models: S30 S190 S195 S1090 SH30 Drinking trough with float valve Delivery:1x float valve low pressure

Replacement float valve high pressure - for Kerbl float bowls Overview: float valve for high pressure connection 1/2" brass connection water flow 7.5 liters / min at 2 - 3 bar Suitable for the models: S30 S190 S195 S1090 SH30 Drinking trough with float valve Delivery: 1x float valve high pressure