Kerbl Power Adapter for Automatic Chicken Door, 12V

Automatic Chicken Door Opener - Reliable Protection for Your Flock The Kerbl automatic chicken door opens and closes doors, sliders or flaps on poultry houses based on time or daylight, without you having to lift a finger. This keeps your birds reliably protected from nocturnal predators such as foxes or martens, even if you get home later than planned. The controller is built with thoughtful safety features: a time delay on the light signal prevents unwanted opening during lightning or brief flashes of brightness. If the slider meets resistance from an animal while closing, the process stops automatically and then resumes. The motor switches off automatically in case of overload, keeping your flock safe and the unit durable. Overview: Daylight-dependent control with light sensor (1 m cable, allows indoor mounting of the controller) Time-dependent control, distinguishing between weekdays and weekends Manual control directly on the device or via optional external switch (item 70565) Mains or battery operation possible Stop function on resistance and automatic shutdown on motor overload 3-year warranty Technical Data: Dimensions: approx. 23.5 x 16 x 10.5 cm Weight: approx. 0.86 kg Housing material: plastic Min. slider weight: 0.5 kg, max. slider weight: 2.5 kg Max. lift height: 60 cm Power supply: 230V mains or battery operation (4 x AA) Included in the Package: 1x Controller with integrated motor and cable pull1x Power adapter 230V4x AA batteries (already fitted)1x Light sensor4x Pulleys1x User manual Note: The sliding door is not included. Questions & Answers: Is the sliding door included?No, the controller is supplied without a sliding door. Suitable sliding doors are available as accessories in our shop. Can I operate it remotely?Yes, the optional external switch (item 70565) allows manual control away from the unit itself. Is it compatible with self-locking doors?No, the automatic Kerbl chicken door is not compatible with sliders or flaps that have a self-locking mechanism.

Agrarzone Chicken Flap - Automatic opening and closing of chicken doors With the automatic chicken door, chicken flaps, doors or sliders on poultry houses can be automatically opened and closed depending on the time of day or brightness. The electronic slider opens and closes your chicken door as needed. The chicken flap opens the vertical gate to your poultry or chicken coop when it gets light and closes it again when it gets dark. In addition, manual operation of the device is also possible. This can be done directly on the device or via manual button. The sensitivity of the integrated twilight switch is easily adjustable, so that unintentional opening is prevented in the event of thunderstorm flashes or near-matched luminaires or hall floodlights. If an animal is under the pusher during the closing process of the automatic chicken flap, the engine of the chicken door gatekeeper will automatically stop when placed and will continue closing when the animal has cleared. The function of the Agrarzone Chicken Flap: The integrated motor of the automatic chicken door is controlled by a twilight switch and thus the opening or closing of a vertical slide is realized by means of a cable pull. In addition, manual operation is possible. The housing of the automatic chicken door is extremely stable and protects the fine electronics from moisture, dirt and sunlight. Slightly protected, the electronic slider, thanks to its extremely durable components, lasts a very long time. The automatic chicken flap has several functions for opening / closing the flap: Light sensor: The chicken flap is controlled by daylight with light sensor. Timer: Control of the chicken door is time-dependent. You can differentiate between weekdays and Weekends. Manual control: directly on the device or via a connected push-button. Overview: Automatic Chicken Flap Mains operation and battery operation possible Daylight-dependent control with light sensor Time-dependent control Manual control, on the device or via connected push-button Delivery: Control with integrated motor and cable Power adapter 230V Batteries (4 x AA, already in the device) light sensor Pulley set (4 pieces) operation manual Assembly of the chicken flap: The assembly of the electronic chicken door is very simple: first you assemble the slide, pull it into the open position, mount the chicken flap device so that you can connect it through the loop with the slider (rolled cord = delivery state!). Then insert the batteries - done! Plan the mounting situation and above all the line guidance from the chicken door to the device. Measure the opening of the chicken flap and provide a suitable sliding door with guide rails. Suitable slides and additional pulleys can be found as accessories in our shop. If you want to supply the automatic chicken door with mains voltage, make sure that a 230 Volt outlet is available nearby. The power supply and the mounting location of the device must be protected against rainfall. The automatic chicken flap is not compatible with valves or flaps that have a self-locking feature. Technical specifications: Min. Gate weight: 0.5 kg Max. Gate weight: 2.5 kg Max. Lifting height: 60 cm Power supply: 230 Volt mains operation (power supply for 12 Volt operation) or battery operation (4 x AA) Models: Automatic chicken door without slider Automatic chicken flap with slider 22 x 33 cm (for normal chickens) Automatic chicken flap with slide 30 x 40 cm (for normal and larger chickens) Automatic chicken flap with slide 43 x 40 cm (suitable for keeping for commercial purposes in accordance with TierschNutztV)

Run Your Electric Fence Energiser on a Car Battery with This Connector Cable This connector cable lets you power your electric fence energiser or other 12V devices, such as an automatic chicken coop door, directly from a car battery or dedicated electric fence battery. It's a practical solution for pastures without a mains connection. The cable is compatible with all battery-powered units from Kerbl, AKO and Corral, as well as standard car batteries. A built-in 2 A fuse protects your equipment from overvoltage, keeping your fence energiser running safely and reliably. Overview: Run your fence energiser or 12V devices from a car battery Compatible with all battery devices from Kerbl, AKO, Corral and standard car batteries 2 A fuse for reliable overvoltage protection 1 Ah battery capacity (1,000 mAh) gives roughly 1 year of runtime (excluding typical self-discharge) Barrel connector 5.5 x 2.1 mm for quick connection Also suitable for powering automatic chicken coop doors Technical data: Voltage: 12 V DC Fuse: 2 A Cable length: 3 m Weight: 180 g Connector type: barrel connector 5.5 x 2.1 mm Scope of delivery: 1x connector cable for car/electric fence battery with barrel connector FAQ: Can I use this to run my fence energiser from a car battery?Yes, the cable is compatible with standard car batteries as well as Kerbl, AKO and Corral battery units. Is a battery included?No, only the connector cable is included. How long does a device run on 1 Ah of battery capacity?Roughly 1 year, though this doesn't account for typical battery self-discharge.