Aesculap Isis Cordless Clipper, Precision Dog Trimmer for Paws & Face

Aesculap GT608D Clipper Blade with DLC Coating for Exacta / IsisThe Aesculap GT608D clipper blade is the DLC-coated version for your Aesculap Exacta (GT415/GT416) and Aesculap Isis (GT420/GT421) battery clippers. With a cutting width of only 24 mm and a cutting length of approx. 0.5 mm, the fine-toothed blade is ideal for cutting contours and fine detail work around paws, ears and faces. The special DLC coating provides significantly higher wear protection and a longer service life than uncoated cutting sets.Thanks to the high-quality Aesculap carbon steel and the diamond-like surface refinement, the blade glides through the coat with minimised friction while staying sharp for longer. The dirt-repellent surface reduces your daily maintenance effort, and the added corrosion protection increases durability even with frequent contact with disinfectants. The replacement blade set is simply fitted to the clipper with a screw and an Allen key – a swap takes only a few minutes.Overview:Fits Isis (GT420/GT421) and Exacta (GT415/GT416) battery clippersDLC coating for high wear protection and long service lifeReduced maintenance thanks to dirt-repellent surfaceIdeal for contours and fine detail work on paws, ears and faceClose, safe cut with a cutting length of approx. 0.5 mmHigh-quality Aesculap carbon steel, fine-toothed and precision groundTechnical Data:Cutting length: approx. 0.5 mmCutting width: 24 mmMaterial: Aesculap carbon steel with DLC coatingMounting: screw and Allen keyOrigin: Made in GermanyScope of Delivery:1x Aesculap GT608D clipper blade for Exacta / Isis battery clipperFAQ:Does the blade fit older Isis and Exacta models too?Yes, the GT608D fits both the current GT416/GT421 and the previous GT415/GT420 models.How often should I oil the blade?Before every use and every 5-10 minutes during work, using special clipper oil (GT604).Can the blade be resharpened?With proper care, resharpening is delayed significantly, and the DLC coating increases durability by up to 20%.

Aesculap GT608 Clipper Blade – Precision for Contours and Fine WorkThe Aesculap GT608 clipper blade is the matching replacement cutting set for the Aesculap Exacta (GT415) and Aesculap Isis (GT420) battery clippers. With a cutting width of just 24 mm and a cutting length of 0.5 mm, this fine-toothed blade is ideal for shaping contours and fine work around paws, ears and face. It delivers a close, clean cut even on tricky areas.Made from special Aesculap carbon steel, the blade offers a significantly higher cutting capacity than conventional cutting sets. Manufacturing on modern Aesculap CNC machining centres ensures consistently high quality and long service life. Swapping the blade is simple: just fit the replacement cutting set to your pet trimmer using a screw and an Allen key – practical for daily use on the farm, in the grooming salon or for veterinary preparation.Overview:Fits Isis and Exacta battery clippersIdeal for contours and fine work on paws, ears and faceCutting length: 0.5 mm for a close cutCutting width: 24 mm for precise workHigh-quality Aesculap carbon steel for long cutting lifeFine-toothed and precision groundMade in Germany for consistently high qualityTechnical Data:Cutting width: 24 mmCutting length: 0.5 mmMaterial: Aesculap carbon steelFits: Aesculap Exacta (GT415), Aesculap Isis (GT420)Fitting: screw and Allen keyScope of Delivery:1x Aesculap GT608 clipper blade for battery clipper Exacta / IsisFAQ:Does the GT608 fit other Aesculap clippers?No, the blade is specifically designed for the Exacta (GT415) and Isis (GT420) models only.Can the blade be resharpened?With proper care and oiling, resharpening can be delayed, though this fine blade is not designed for regrinding.How often should I oil the blade?Oil the blades before each use and every 5-10 minutes during work to extend their service life.

Aesculap Clipper Oil – reliable care for your shearing machineThe Aesculap clipper oil GT604 is the special oil developed for all Aesculap shearing machines and works just as well with other common brand clippers. It provides optimum lubrication for every moving part in the shearing head, making it essential for anyone who regularly clips horses, cattle, sheep or dogs.A well-lubricated shearing head runs more smoothly, takes strain off the motor and delivers a cleaner cut. Apply a few drops to the side of the cutting set every 5 to 10 minutes during shearing, and oil again after clipping once hair residue has been removed – this keeps your blades sharp and ready for the next job. The oil does not resinify or stick together, which noticeably extends the service life of both shearing head and machine.At a glance:Ensures optimum lubrication of all moving parts in the shearing headDoes not resinify or stick together, even with frequent useSuitable for all common brand shearing machines, not just AesculapTakes strain off the motor and protects blades from wearDelivers a cleaner, more even cutPractical bottle size for long-lasting useTechnical data:Content: 90 mlSuitable for all Aesculap shearing machines and common third-party brandsLiquid special oil in a practical bottleScope of delivery:1x Aesculap Clipper Oil 90 mlQuestions & Answers:How often should I oil my shearing head?During shearing, apply a few drops to the cutting set every 5 to 10 minutes to reduce friction and wear.Does the oil also work with other brands?Yes, besides Aesculap machines it is also excellently suited for all common brand shearing machines.When should I apply extra oil?After shearing, remove any hair residue from the cutting set and oil it again so the machine is optimally protected for the next use.