beris Bar Bit

The beris PRIME sets new standards in communication between horse and rider. Due to the anatomical shape of the extremely soft mouthpiece the pressure is equally distributed on tongue and bars. The integrated oval bit guards with their carefully designed transition to the middle piece prevent pinching of the horse‘s lips and provide the bit with additional, particularly good lateral support. The shape and the weight of the rings ensures a very quiet, neutral position in the horse"s mouth. This characteristic makes the bit wonderfully suited to young and inexperienced horses. The shape of the sidepiece also provides optimum lateral support and guidance. The large ring facilitates good and quiet use of the reins.

The eggbutt bar is a universally deployable mouthpiece, it sits very quietly in the horse‘s mouth and the eggbutts effectively prevent pinching of the lips. The bit fits perfectly in the mouth due to its slight curve. Pressure on the rein alters the angle of the bit in the mouth and, due to its special design, produces an increased effect on the bars and tongue. The shaped transition from the mouthpiece to the bit rings prevents pinching and additionally provides the bit with particular lateral stability and hold. The shape of the bit is particularly suited to working with young horses.

Providing the combined effect of a port and the positive characteristics of the butterfly bar, the profile of the beris KONNEX bar is slimmer and it positions itself very comfortably in the horse’s mouth. There is also more room available as the port in the beris KONNEX bar is significantly wider. Suitable for horses with little space in the mouth e.g. thoroughbred types or older horses (due to change in tooth alignment), horses with large tongues and, in particular, ones sensitive to pressure points on the tongue. The 3 ring bit combines an effective lateral restriction, lever and elevator action in one. The degree of effect is selected by the different buckling possibilities for the reins. Buckled onto the bottom ring, taking up the rein exerts the effect of a short lever. The 3-ring bit is often used to test the horse"s reaction to a lever effect.

Providing the combined effect of a port and the positive characteristics of the butterfly bar, the profile of the beris KONNEX bar is slimmer and it positions itself very comfortably in the horse’s mouth. There is also more room available as the port in the beris KONNEX bar is significantly wider. Suitable for horses with little space in the mouth e.g. thoroughbred types or older horses (due to change in tooth alignment), horses with large tongues and, in particular, ones sensitive to pressure points on the tongue. The shape and weight of the sidepieces ensures a still, neutral position in the mouth. This characteristic makes the bit ideally suited to young horses that are still a bit green. The shape of the sidepiece also gives them optimum lateral support and guidance. Good and quiet handling of the reins is also facilitated by the large ring.

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more relaxation and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore, this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking and the like. The shaped transition from the mouthpiece to the bit rings makes pinching of the lips impossible and also provides the bit with a particularly stable lateral hold.The shape of the bit is well suited to working with young horses.

This anatomically correct bit sits lightly and evenly on tongue and bars and provides more room and freedom of movement for the tongue. When taking up the reins an even pressure is applied to the bars and tongue. The tongue and bars are not squeezed laterally. The use of bit guards prevents lip pinching. Thanks to its slightly curved shape, the comfort bar lies very quietly in the horse"s mouth. Mouthpieces with a slightly curved bar are considered to be particularly gentle and kind on the mouth. This characteristic combined with our beris plastic enables horse and rider to communicate in a gentler and easier way. The Comfort bit is especially suited to for young and sensitive horses. The 3 ring bit combines an effective lateral restriction, lever and elevator action in one. The degree of effect is selected by the different buckling possibilities for the reins. Buckled onto the bottom ring, taking up the rein exerts the effect of a short lever. The 3-ring bit is often used to test the horse"s reaction to a lever effect.

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the supports. Useful on horses that clearly need more support and guidance around turns, like young and inexperienced ones or very strong ones. The full cheek bit is very popular with show jumpers for turning quickly.

The eggbutt bar is a universally usable mouthpiece, it is lies very quietly in the horse"s mouth and the eggbutts on the sides prevent effectively prevent pinching of the lips.Our plastic comfort bar is particularly slim in size. With a thickness of 15 mm, the thin comfort bar provides more comfort even in smaller horse mouths. This makes the mouthpiece an ideal bit for ponies or horses that have very little space in their mouth. The gently modelled transition from the mouthpiece to the bit rings makes it impossible to pinch the lips and also gives the bit a particularly stable lateral hold. The shape and the different ring sizes make the bit particularly recommended for for working with young horses. With a small ring (6cm), the rider"s hand acts faster and more directly due to the shorter effective pathway; with the larger ring (7.5 cm), the effect of the rider"s hand is softened. The eggbutt bit can also be perfectly adapted to almost any type of horse thanks to the different degrees of hardness of the mouthpiece.

Identical in shape to the Comfort Bar, just the thickness is a lot thinner at 15 mm. This makes the bit an ideal one for ponies and horses with limited room in their mouths. Very successful in use as a dressage bit on horses for whose mouth a thick Weymouth bit and bradoon would be too much.

Horses accept leather bits exceptionally well. Leather is a purely natural product, it promotes chewing and also the flow of saliva. The bit slides easily in the mouth thereby increasing well being. The processed leather has been vegetable-tanned and hand stitched. When moistened, the anatomically pre-shaped bit adjusts perfectly to the anatomy of the horse"s mouth. Our leather mouthpiece is particularly well suited to young and highly sensitive horses. Even horses that generally dislike bits in their mouth mostly like a leather bit and can re-learn a trusting acceptance of the bit. The loose ring means that the bit moves more in the mouth. The loose ring snaffle is therefore a bit for horses who prefer a more mobile bit. The ring runs very smoothly in the copper sockets, and the resulting better durability increases the life of the bit. In choosing the bit, one can also address the horse"s requirements.

The tongue port bar has a particular flattened form to the port. This gives the tongue an optimum amount of room. Many horses respond to this with improved suppleness and increased chewing. And yet this bit is also well suited to horses that play with their tongues, trying to put the tongue over the bit, as the port effectively prevents this. Therefore this bit is perfect for horses that do not tolerate conventionally shaped bits due to the pressure on the tongue and react with head-tossing and the like. The loose ring means a greater mobility of the bit in the mouth. The loose ring bit is therefore a bit for horses that prefer a "more mobile" bit in their mouth. The ring runs very evenly in the copper sockets and, due to the better durability, increases the working life of the bit considerably.

beris PRIME sets new standards in communication between horse and rider. Due to the anatomical shape of the extremely soft mouthpiece, the pressure is equally distributed on tongue and bars. The integrated oval bit guards with the carefully shaped transition to the middle part prevent lip pinching and also provide lateral support. The increased pressure from using the second rein on the gag bit causes the bit to rotate and be pulled upwards in the mouth. This results in a stronger effect. Very useful with horses that tend to lean on the bit. Likewise also useful on horses for achieving increased elevation.

This anatomically correct bit sits evenly and lightly on tongue and bars, and provides more room and freedom of movement for the tongue. When the reins are applied, equal pressure is brought to bear on the tongue and bars. A lateral squeezing of tongue and bars does not occur. Bit guards prevent the pinching of the lips. Thanks to its slightly domed shape, the comfort bar sits very still in the horse"s mouth. Mouthpieces with a slightly bowed bar are considered to be especially gentle and kind to the mouth. This characteristic, combined with our beris plastic, enables the rider to communicate with his horse in a more gentle and delicate way. The comfort bar is ideal for young and sensitive horses. The Kimblewick bit is an effective combination of a lever action on the horse‘s lower jaw, poll pressure and a re-positioning of the bit inside the horse‘s mouth. Three different buckling options allow a well regulated use of the bit. The solid sidepieces of the bit give it a certain weightiness, which ensures a quieter position in the mouth.

This anatomically correct bit sits lightly and evenly on tongue and bars and provides more room and freedom of movement for the tongue. When the reins are taken up, pressure is applied evenly on tongue and bars. A lateral squeezing of tongue and bars will not take place. Bit guards prevent pinching of the lips. Thanks to its slightly curved shape, the comfort bar sits very still in the horse"s mouth. Bits with a slightly curved bar are considered to be particularly gentle and kind to the mouth. This property, in combination with our beris plastic, enables the horse and rider to communicate with each other in an easier and more gentle way. The comfort bar is especially suitable for young and sensitive horses. The loose ring means that the bit is more mobile in the mouth. The loose ring snaffle is meant for horses who prefer this extra ´mobility´ in a bit. The ring runs very smoothly in the copper sockets, the resulting better durability leads to an increased lifespan for the bit.

Elegant design, gleaming appearance with greatest possible comfort for the sensitive horse mouth - these characteristicsdistinguish this dressage pelham.From the very sensitive horse to one needing a stronger action, with the variety of possibilities available the optimum bit can be assembled for every horse. Irrespective of the degree of hardness, the plastic mouthpiece is very well accepted, promoteschewing and acceptance of the bit.

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The 3 ring bit combines an effective lateral restriction, lever and lifting action in one. The degree of effect is selected by the different buckling possibilities for the rein. Buckled onto the bottom ring, taking up the rein exerts the effect of a short lever. The 3-ring bit is often used to test the horse"s reaction to a lever effect.

The beris PRIME sets new standards in communication between horse and rider. Due to the anatomical shape of the extremely soft mouthpiece the pressure is equally distributed on tongue and bars. The integrated oval bit guards with their carefully designed transition to the middle piece prevent pinching of the horse‘s lips and provide the bit with additional, particularly good lateral support. The shape and the weight of the rings ensures a very quiet, neutral position in the horse"s mouth. This characteristic makes the bit wonderfully suited to young and inexperienced horses. The shape of the sidepiece also provides optimum lateral support and guidance. The large ring facilitates good and quiet use of the reins.

This anatomically correctly shaped bit rests evenly and lightly on tongue and bars, and provides more room and freedom of movement for the tongue. When applied with this bit, the rein will exert pressure evenly on tongue and bars. A lateral squeezing of tongue and bars does not occur. The use of bit guards makes it impossible for the lips to be pinched. Thanks to its slightly domed shape, the comfort bar lies particularly still in the horse"s mouth. Mouthpieces with a slightly domed bar are considered to be particularly gentle and mouth-friendly. This property combined with our beris plastic enables horse and rider communication to be more gentle and relaxed. The comfort bar is particularly suited to young and sensitive horses. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the angled cheeks. Useful on horses that need more lateral support and guidance around turns. These can not only be strong horses, but alsoyoung and inexperienced ones. The full cheek bit is very popular with show jumpers for turning quickly.

This anatomically correctly shaped bit rests evenly and lightly on tongue and bars, and provides more room and freedom of movement for the tongue. When applied with this bit, the rein will exert pressure evenly on tongue and bars. A lateral squeezing of tongue and bars does not occur. The use of bit guards makes it impossible for the lips to be pinched. Thanks to its slightly domed shape, the comfort bar lies particularly still in the horse"s mouth. Mouthpieces with a slightly domed bar are considered to be fairly particularly gentle and mouth-friendly. This property combined with our beris plastic enables horse and rider communication to be more gentle and relaxed. The comfort bar is particularly suited to young and sensitive horses. The increased pressure from using the second rein on the gag bit causes the bit to rotate and be pulled upwards in the mouth. This results in a stronger effect. Very useful with horses that tend to lean on the bit. Likewise also useful on horses for achieving increased elevation.

The eggbutt bar is a universally used mouthpiece. It sits very quietly in the horse"s mouth and the "olives" at each side effectively prevent pinching of the lips. Increased pressure from the second rein on the gag causes the bit to rotate and lifts the bit in the mouth, which results in a stronger effect. Very useful on horses that tend to lean on the bit. Can also be used to produce more elevation in the horse.

This ported bar has an especially flattened port design. This gives the tongue optimum room. Many horses respond to this with more suppleness and increased chewing. This bit is also well suited to horses that play with their tongues, trying to put their tongue over the bit, as the port prevents this effectively. Therefore this bit is eminently suited to horses that don’t like conventionally shaped bits due to the pressure on the tongue and respond with head-shaking or similar. The full cheek bit sits very quietly and is very stable in the mouth. It provides reliable lateral restriction without the risk of the skin or lips being pinched by the angled supports. Useful on horses that need more support and guidance around turns, like young and inexperienced ones or very strong ones. The full cheek bit is very popular with show jumpers for turning quickly. The increased pressure from using the second rein on the gag bit causes the bit to tilt and be pulled upwards in the mouth. This results in a stronger effect. Very useful with horses that tend to lean on the bit. Likewise, also used on horses to achieve increased elevation.

Providing the combined effect of a port and the positive characteristics of the butterfly bar, the profile of the beris KONNEX bar is slimmer and it positions itself very comfortably in the horse’s mouth. There is also more room available as the port in the beris KONNEX bar is significantly wider. Suitable for horses with little space in the mouth e.g. thoroughbred types or older horses (due to change in tooth alignment), horses with large tongues and, in particular, ones sensitive to pressure points on the tongue. The increased pressure from using the second rein on the gag bit causes the bit to rotate and be pulled upwards in the mouth. This results in a stronger effect. Very useful with horses that tend to lean on the bit. Likewise also useful on horses for achieving increased elevation.

The tongue port bar has an especially flattened shape to the port. This gives the tongue optimum room. Many horses respond to this with improved suppleness and increased chewing. This bit is also very well suited to horses that play with their tongues, trying to get their tongue over the bit, as the port effectively prevents this. This mouthpiece is thus eminently suited to horses that do not tolerate traditionally shaped bits due to the pressure on the tongue and react by head-shaking and the like. The Kimblewick bit is an effective combination of a lever effect on the branches of the horse‘s lower jaw, pressure on the poll and change of position of the bit inside the horse"s mouth. Three different buckling options allow the use of the bit to be fine tuned. The sturdy side pieces of the bit provide a certain "weight", which ensures a steadier position in the mouth.

Providing the combined effect of a port and the positive characteristics of the butterfly bar, the profile of the beris KONNEX bar is slimmer and it positions itself very comfortably in the horse’s mouth. There is also more room available as the port in the beris KONNEX bar is significantly wider. Suitable for horses with little space in the mouth e.g. thoroughbred types or older horses (due to change in tooth alignment), horses with large tongues and, in particular, ones sensitive to pressure points on the tongue. The Kimblewick Bit is an effective combination of a lever effect on the horse‘s lower jaw, pressure on the poll and change of position inside the horse‘s mouth. Three different buckling options allow the bit to be fine tuned. The sturdy side pieces of the bit give it weight ensuring a steadier position in the mouth.