Skip to main content Skip to search Skip to main navigation

Corral Panel Accessories: Connectors, Ground Anchors and Kick Guards

With the right accessories your panels stand firm and no animal gets caught between the rails. Here you will find parts for connecting and anchoring panels.

Corral Panel Accessories: A Firm Stand for Your Pen

Corral panel accessories turn single panels into a stable pen. Connectors hold panels together in a straight line, at an angle or as a T junction, while ground anchors and brackets secure them against shifting. Add to that a kick guard that closes off the lower part of panels and gates. Your paddock or round pen stays stable, even when horses or cattle lean against it or crowd together.

Connecting in Any Shape

For a straight line, use inline connectors that hold two panels together end to end. At corners, a corner connector provides a firm angle, and with a T connector you can put a dividing wall in the middle of a pen and split it into two areas. A gate connector hangs the gate on the panel next to it. With these parts you can build holding pens, races or paddocks with several sections from the same panels, and change the layout whenever your needs change.

Anchoring and Securing

Ground anchors 50 cm long are driven into the ground and connected to the panel foot. They stop the pen from creeping in wind or under pressure from the animals, which matters most on soft or sloping ground. At the stable or on paved areas, wall and floor brackets help. The kick guard is a cover for the lower part of the panel. It protects foals, calves, sheep and goats from putting a leg between the rails and stops small animals from slipping through.

Frequently asked questions

Do connectors from different manufacturers fit together?
Not always, because tube diameters and hook spacing vary. It is best to choose accessories that match the brand of your panels.

How many ground anchors do I need for a panel pen?
As a rule of thumb, anchor every corner and the gate panel. On soft ground or in windy spots, add extra anchors along the long sides.

Can I fix panels directly to the stable wall?
Yes, with a wall bracket you bolt the first panel firmly to a masonry or timber wall. That way the stable wall becomes one side of your paddock and you need fewer panels.

Accessories for Corral Panels

A pen made of panels is only ever as stable as the connections that hold it together. With the right accessories you make sure your paddock, race or round pen stays standing even when a horse leans on it or cattle crowd together. Here you will find inline connectors, corner connectors, T connectors and gate connectors that let you join panels in any shape. Growi ground anchors 50 cm long hold the pen in the ground, and wall and floor brackets secure it at the stable or on paved areas. A kick guard for panels and field gates closes off the lower section so that foals, calves or goats do not get their legs between the rails. Choose accessories that match the brand of your panels, then every joint sits tight and your pen stays stable through many seasons of use.