Aesculap Sheep Clipper

Aesculap Sheep Clipper Econom NOVA CL battery GT684 Cordless all-round sheep shearing machine of the latest generation, which convinces with its excellent penetrating power. The Aesculap Econom NOVA CL is a powerful battery-powered clipper with a newly developed clipper head for full shearing of sheep, Angora goats and similar animals with thick, woolly coats. The battery-operated sheep clipper has an enormous pulling power like a cable-operated clipper. It impresses with its long battery life up to 70 minutes and low heat generation. The use of a brushless direct current motor (EC Motor) with the latest lithium technology ensures long operating times with constantly high Performance with approx. 2.700 strokes/min. The shearing machine achieves an optimal shearing result and a long overall service life thanks to the electronic control, which perfectly controls the power output depending on the resistance at the drive. The newly designed shearing head to accommodate the specially developed GT598 short shearing blade is compatible with the shearing blades of most other manufacturers. The shearing blade set cuts extremely cleanly and evenly. The blades can be sharpened several times and are therefore very durable. The slim housing and the weight balance promise low-fatigue and ergonomic handling even during long periods of use. The electronic pressure switch recessed in the housing prevents accidental switching on/off when reaching around. Note: To increase the service life of the clipper, it should always be maintained with clipper oil before and after clipping. It is also very important to oil the clipper every 5 to 10 minutes during clipping. Overview: Shear sheep powerfully and precisely Excellent clipping power Long battery life Low heat Generation Ergonomic handling Very well balanced Includes battery and clipper blade set High total life Recessed electronic pressure switch Clipper head compatible with other clipper blades Technical data: Operating mode: Battery Drive: Brushless EC motor Power: 75 Watt Gear: Spur gear Battery technology: Li-Ion Battery capacity: 3.500 mAh Battery life: approx. 70 min Battery charging time: approx. 80 min Cutting speed: approx. 2.700 strokes/min Sound pressure level: approx. 72 dB Weight: 1.470 g (incl. battery and shaving head) Shearing head system: Shearing blade set Lower / upper blade: 13/4 teeth Residual hair length: approx. 4,5 mm Scope of delivery: 1x Aesculap Econom NOVA CL Sheep clipper (GT684) 1x Li-Ion battery (GT821) 1x Charging station (GT803) 1x Lower blade 13 teeth / 3,5 mm (GT598) 1x Upper blade 4 teeth / 4,5 mm (GT578) 1x Aesculap Clipper oil (GT604) 1x Instruction manual 1x Sturdy plastic case

Aesculap Shearing blade for Sheep Clipper Econom With the Aesculap shearing blades, even cutting thick wool is no problem! 100% Made in Germany. These upper and lower blades from Aesculap are compatible with the Aesculap Econom shearing machines II, CL, NOVA and NOVA CL. The special shearing blades are made of very high quality and low-wear carbon steel. This makes it possible to regrind the blades several times. The shear blades also convince with uniform and long-lasting cut quality. Care instructions: To ensure optimal life of the shearing head, regular and proper care is important. Clean the cutting plate with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil is well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the clipper blades can be increased up to 20%. Also the regrinding can be delayed. Overview: Very long tool life due to abrasion-resistant carbon steel Low wear and high quality shear blades Long cutting ability Cutting surfaces can be reground several times High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Sheep Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Cutting length: GT578 Upper blade (4 teeth), 4,5 mm suitable for Econom NOVA, Econom II, Econom CL, Econom NOVA CL GT588 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 77 mm GT594 Bottom blade (13 teeth), 3,5 mm suitable for Econom II, Econom CL, width: 86 mm GT598 Bottom blade (13 teeth), 3,5 mm suitable for Econom NOVA, Econom NOVA CL

Aesculap Sheep Clipper Econom NOVA GT694 The new Econom NOVA is a powerful shearing machine with a newly developed shearing head and extra short shearing blade for excellent shearing of sheep. Shearing sheep is made easy with the Econom NOVA Sheep shearing machine. The shearing machine is suitable for full shearing of sheep, angora goats and similar animals with thick, woolly coats. The powerful high-performance motor with 2.750 strokes/min manages even the largest coat hurdle and allows the clipper to glide consistently through the coat. The slim housing and the weight balance promise low-fatigue and ergonomic handling even during long periods of use. The newly designed shearing head to accommodate the specially developed GT598 short shearing blade, is compatible with the shearing blades of most other manufacturers. The low-wear shearing blade set made of special steel ensures an extremely clean and even cut. The shearing blades can be sharpened several times and are therefore very durable. A perfect air flow concept keeps the heating in the handle area and the clipper head low. Easy maintenance is ensured by a tool-free filter and carbon brush change. The integrated electronic start-up control and overload protection offer the greatest possible operational safety. Note: To increase the service life of the clipper, the clipper should always be maintained with clipper oil before and after clipping. It is also very important to oil the clipper every 5 to 10 minutes during clipping. Overview: Shear sheep easily and precisely Excellent Penetration Ergonomic handling Optimal weight distribution Low maintenance and long service life With short shearing blade set made of special steel Low heating of handle and clipper head Clipper head compatible with other clipper blades Tool-free filter and carbon replacement Operational safety due to electronic start-up control Integrated overload protection Technical data: Operating mode: 230 V Drive: DC motor Power: 200 W DC / 400 W AC Gear: Spur gear Stroke rate: approx. 2.750 strokes/min Sound pressure level: approx. 76 dB Cable length: 5 m Weight: 1.200 g Shearing head System: Shearing blade set Lower / upper blade: 13/4 teeth Residual hair length: approx. 4,5 mm Scope of delivery: 1x Aesculap Econom NOVA Sheep Clipper (GT694) 1x Lower blade 13 teeth / 3,5 mm (GT598) 1x Upper blade 4 teeth / 4,5 mm (GT578) 1x Aesculap Clipper oil (GT604) 1x Instruction manual 1x Hard case

Aesculap Clipper Head for Econom with Shearing Blade Set The matching shearing head and shearing blade set for the Econom sheep shearing machines. 100% Made in Germany. The shearing head with top plate and bottom plate from Aesculap is compatible with the Aesculap Econom shearing machines II, CL, NOVA and NOVA CL. The special shearing blades are made of very high-quality and low-wear carbon steel. This makes it possible to resharpen the blades several times. The shearing blades also convince with even and long-lasting cutting quality. Care instructions: To ensure the optimum life of the shearing head, regular and correct care is important. Clean the cutting plate with a soft cloth or brush. Make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with special clipper oil (GT604). The shearing blades must be oiled before each use with the shearing head mounted. During work, oil every 5-10 minutes. After oiling, let the machine idle for a few seconds so that the oil can spread well and is not transferred to the animal's hair. With proper maintenance and care, the durability of the clipper blades can be increased by up to 20%. Regrinding can also be delayed. Overview: Very long service life due to abrasion-resistant carbon steel Low wear and high quality shearing blades Long cutting ability Cutting surfaces can be reground several times High corrosion protection Made in Germany Suitable for the following shearing machines, among others: Aesculap Econom II Sheep Clipper Aesculap Econom CL Sheep Clipper Aesculap Econom NOVA Sheep Clipper Aesculap Econom NOVA CL Sheep Clipper Cutting length: GT367 incl. Shearing Blade Set (GT502, GT501) suitable for Econom NOVA, Econom NOVA CL GT369 incl. Shearing Blade Set (GT588, GT578) suitable for Econom II, Econom CL

Shearing blade set for sheep Econom consisting of lower blade GT598 and upper blade GT578