Skip to main content

WAHL KM10 dog clipper

Powerful, quiet and extremely light: The Wahl KM10 dog clipper with state-of-the-art motor technology is adapted to the professional needs of demanding dog groomers.

The Wahl KM10 is a professional dog clipper for groomers, vets and ambitious dog owners. The Wahl KM10 shines with its power, ergonomics, cutting reliability paired with a low weight. The new brushless motor technology guarantees maximum performance at two selectable speed levels of 3000 rpm and 3700 rpm. The automatic speed control ensures constant cutting performance even with difficult fur.

The handy Wahl KM10 mains clipper offers plenty of freedom of movement during work thanks to the 4.2 metre long mains cable. The clipper also fits securely in the hand. The ergonomically optimised design enables fatigue-free, non-stop clipping. The rounded housing ensures optimal hair drainage and easy cleaning of the clipper head and clipper.

The mounted Ultimate Competition stainless steel cutting set (1,8 mm) perfectly rounds off the KM10 choice. This diamond-ground stainless steel shaving head is sharp and has a precise cutting pattern.

At a glance:

  • Ideal for full shearing of small to large dogs
  • Professional clipper for dog salons, vets and dog owners
  • 2 Powerful performance levels for precise dog clipping
  • Modern, brushless motor technology for high performance
  • With automatic speed control
  • Ergonomic design with anti-slip insert
  • Rounded housing for optimal hair flow and increased shearing speed
  • Energy-saving switch-mode power supply with low voltage
  • Robust metal suspension ring for space-saving storage
  • Quick-change cutting set system for easy replacement
  • Incl. original Wahl Ultimate Competition cutting set (1,8 mm)
  • Premium clipper "Made in USA"

Technical data:

  • Mode of operation: Mains
  • Drive: DC motor (2 power levels)
  • Voltage: 100 - 240 V
  • Mains frequency: 50 - 60 Hz
  • Cutting speed: 3000 / 3700 Strokes/min.
  • Sound pressure level: approx. 63 dB (A)
  • Dimensions: approx. 19,5 x 5,3 x 4,9 cm
  • Weight: approx. 350 g (without cable)
  • Length of mains cable: 4,2 m
  • Colour: turquoise
  • Cutting system: SnapOn stainless steel cutting set
  • Cutting set width: 49 mm
  • Cutting length: 1,8 mm

Scope of delivery:

1x Wahl KM 10 clipper
1x Wahl Ultimate Competition cutting set #10 1,8 mm
1x Charging cable 4.2 m
1x Cleaning brush
1x Cutting set oil

Dezibel: 63 dB
stroke rate: 3000 strokes/min, 3700 strokes/min
Power source: Cord
Animal species: Dog, Cat
Power supply: 230 Volt
Animalsize: Big dogs, Cats
Manufacturer warranty: 2 years
Data according to manufacturer. Errors and changes reserved.

1 of 1 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


15 June 2023 05:52

Review with rating of 5 out of 5 stars

Tolle Schermaschine, sehr zufrieden

Hatte die Schermaschine schon 2 mal im Einsatz und bin begeistert! Die Maschine läuft ruhig und der Scherkopf schneidet sehr gut. Klare Kaufempfehlung!

YouTube

WAHL clippers offer the highest precision and durability for the care of your animals. Thanks to innovative technology and robust materials, they guarantee long-lasting performance and easy handling. No matter whether you want to carry out fine detailed work or powerful shearing, WAHL has the right device for every application. The ergonomic designs enable comfortable working, while advanced cutting technologies ensure precise and clean cuts. Discover the versatile clippers and trimmers from WAHL and benefit from quality “Made in Germany”.

Manufacturer information

Responsible person

wahl

    Choose accessories

    Aesculap Shearing machine oil 90 ml
    Aesculap Shearing machine oil 90 ml
    Aesculap Shearing machine oil 90ml The special oil for all Aesculap shearing machines, is suitable for all moving parts on and in the shearing head. The shearing machine oil ensures optimum lubrication of all moving parts in the shearing head. The oil is also excellently suitable for all common brand shearing machines. At a glance: does not resinify and does not stick together also suitable for all common shearing machine models Content: 90 ml Scope of delivery: 1x Aesculap Shearing machine oil 90ml

    Content: 0.09 Litre (€103.22* / 1 Litre)

    €9.29*
    Wahl special blade oil 200 ml
    Wahl special blade oil 200 ml
    Choice of special cutting oil 200 mlThe Wahl shearing machine oil is suitable for all moving parts on and in the shearing head.This high-quality shearing machine oil cleans and lubricates your Wahl cutting set reliably and protects it from corrosion. After oiling, light rust stains are quickly removed. This special oil is ideal for clippers, professional hair clippers and hair clippers before, during and after clipping. Optimal care without resin.At a glance:Shaving head oil 200 mlOptimum and safe care without resinFor shearing machines, cutting sets and shearing headsBefore, during and after shearingContent:200 ml

    Content: 0.2 Litre (€139.95* / 1 Litre)

    €27.99*
    WAHL Attachment comb set stainless steel
    WAHL Attachment comb set stainless steel
    WAHLAttachment comb set stainless steel - 8-piece set for SnapOn Competition Series cutting sets In this set you have 8 different attachment combs at your disposal. From short to long, there is the right one for every coat length. The original WAHL Stainless steel attachment combs are particularly robust and durable and are suitable for the Ultimate WAHLCompetition Series blade sets. The set for all cases! Stainless steel attachment combs with colour coding for easy size orientation in practical storage box, suitable for ® ultimate WAHLCompetition Series cutting sets and ® Competition Series cutting WAHLsets from 0.8 - 3 mm (# 30, 15, 10, 9, 8.5). WAHL® stainless steel attachment combs and a 0.8 mm (#30) blade set are an ideal combination and are ideal for matted fur while at the same time allowing the attachment combs to determine the cutting length! Feel free to use the sizes of the metal attachment combs to find your desired cutting length. At a glance: Stainless steel attachment comb set Compatible with WAHL® Competition Series and ultimate Competition Series cutting sets Secure fit due to engagement on the blade set Very good sliding properties due to slim metal teeth More dimensionally stable than conventional plastic attachment combs Time saving shearing Uniform shearing result up to 25 mm Scope of delivery: 1 x attachment WAHLcomb stainless steel 3 mm 1 x WAHLattachment comb stainless steel 6 mm 1 x attachment WAHLcomb stainless steel 10 mm 1 x attachment WAHLcomb stainless steel 13 mm 1 x attachment WAHLcomb stainless steel 16 mm 1 x attachment WAHLcomb stainless steel 19 mm 1 x attachment WAHLcomb stainless steel 22 mm 1 x attachment WAHLcomb stainless steel 25 mm

    €44.99*
    Clipper Blade SnapOn for Moser Max 45 / Max 50 1 mm, #30F (fine teeth)
    Clipper Blade SnapOn for Moser Max 45 / Max 50 1 mm, #30F (fine teeth)
    Size: 1 mm, #30F (fine teeth)
    Clipper Blade Moser Max 45 / Moser Max 50 Precision ground cutting set from WAHL - High quality workmanship 100% made in Germany. The original Moser Snap-On Clipper head from WAHL is a precision ground full metal cutting set. The cutting set is "Made in Germany" and suitable for professional use as well as for the home user. The shearing head is made of high quality stainless steel by cross grinding and not punched. This manufacturing method gives the shearing head an extremely long service life. The grooved profile on the back ensures optimal cooling of the cutting set. The special shaving head geometry and the optimally adjusted cutting pressure ensure an exact cut. Thanks to the high quality of workmanship, the cutting set can be reground several times. The Moser replacement shear blades are compatible with all current brand-name devices that use a Snap On cutting set. The SnapON change system makes it easy to slide the shearing head on and off in seconds, without the use of tools. Care Tip: To ensure optimal life of the shaving head, regular and proper care is important. Clean the cutting plates with a soft cloth or brush. When doing so, make sure that the gaps between the teeth are clean. To prevent corrosion when using disinfectant, dry the shaving head thoroughly. After drying, oil the clipper heads with clipper oil. The shearing blades are before each use with the shearing head mounted oil. During the work every 5-10 minutes to oil. After oiling, let the machine idle for a few seconds so that the oil can be well distributed and not transferred to the hair of the animal. With proper maintenance and care, the durability of the shaving heads can be increased up to 20%. Also the regrinding can be delayed. Overview: For all shearing machines with SnapOn High processing quality Made of high quality stainless steel Very long cutting ability Multiple regrindable All parts are cross and profile ground Made in Germany Suitable among others for the following shearing machines: Moser Max 45 Moser Max 50 Oster Golden A5 Oster A6 Comfort Oster A6 Slim Oster Pro 3000i Oster PowerPro Ultra Oster Power Max Aesculap Durati Aesculap FAV5 Aesculap FAV5 CL Aesculap FAV5 Hybrid Aesculap Fortis Wahl Avalon Wahl KM2 Wahl KM5 Wahl KM10 Wahl KM Cordless Wahl KM Cordless Horse Kerbl Clipper PROFI More shearing machines with SnapOn Clipper Blades Cutting length: 1/10 mm, #40F for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, heavily tangled, matted, knotted 1/20 mm, #50F for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, strongly tangled, matted, knotted 1 mm, #30F (fine teeth) for Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle coat type: long, fine, with or without undercoat, strongly tangled, matted, knotted 2 mm, #10F (fine teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier, Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle / coat type: short, bristly, long, fine, with or without undercoat, strongly tangled 2,3 mm, #10W (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 3 mm, #8,5F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier, Maltese, Yorkshire Terrier, Shih Tzu, Golden Retriever, Bobtail, Pekinese, Poodle / coat type: short, bristly, long, fine, with or without undercoat, strongly tangled 5 mm, #7F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 7 mm, #5F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat 9 mm, #4F (coarse teeth) for Dalmatian, Great Dane, Roughhaired Dachshund, Schnauzer, West Highland Terrier Coat type: short, bristly, with or without undercoat

    €49.99*