Elmag Automatic Welding Shield FLAME

Elmag Automatic Welding Shield FLAME

The stylish MultiSafeVario® welding helmet offers welding protection at the highest level. The best-selling model from ELMAG has already proven itself thousands of times!

The MultiSafeVario® Welding helmet "FLAME" can be used for all common welding and grinding work. Optimal for MMA electrode welding, MIG/MAG and TIG/TIG inert gas welding, plasma cutting and grinding processes. The automatic welding helmet reliably protects the eyes and face from ARC radiation and provides perfect shielding of the head and neck from metal spatter, welding and grinding sparks. Due to the adjustable headband with snap-in mechanism the shield can be comfortably adjusted to the head size. It offers thanks to UpandDown mechanism a center of gravity optimization when opening and closing the visor.

The brightness level of the large field of view (98 x 55 cm) enables a continuous welding process with the helmet closed. From electrode attachment and ignition to weld inspection, electrode change and material handling, the visor can remain down. Accidental 'flashing' such as during tacking is eliminated.

When the ARC is ignited, the large field of vision of the welding shield is within a very short time automatically darkened. The welding process can be observed without glare. The internal, adjustable delay/brightening delay ensures that the anti-glare cassette remains sufficiently closed after the light curtain is switched off to prevent the eyes from being blinded by the afterglow of the weld seam.

The protection level (degree of darkening for optimum vision, depending on the welding process or arc intensity) and the response (sensitivity) of the field of vision can be continuously adjustable at any time by means of controls on the outside of the helmet - one hand remains free for the welding torch.

Field of application:

• Already from 5 amps
• MMA/E-HAND/SMAW
• MIG/MAG/GMAW
• FILLER WIRE
• TIG/TIG/GTAW
• PLASMA CUTTING
• GRINDING

Overview:

• Best-selling model from elmag, proven a thousand times over
• GREEN COLOR glare protection cassette
• Large field of view (WxH) 98 x 55 mm
• Stylish helmet design
• Low switching time of only 0,05 ms
• External, adjustable delay/brightening delay
• External, adjustable sensitivity for optimal response
• Replaceable back-up batteries (2 PCS. CR 2450)
• Test button to check function
• Suitable for overhead and forced position welding
• Welding and grinding mode
• Optionally available dioptric disc inserts
• Aperture with up-and-down mechanism
• Comfortable, adjustable headband with snap-in mechanism
• Headband and brow welding band interchangeable
• Visor angle and wearing height adjustable
• Both hands free for set-up and welding work
• High welding quality due to continuous observation
• Certified according to EN 379/175/166 and PPE (EU) 2016/425

Technical data:

• Automatic fast forward and reverse: No
• Anti-glare filter: GREEN COLOR
• Field of view size (WxH): 98 x 55 mm
• Classification according to EN 379: 1/1/1/2
• Light sensors: 4
• Fully automatic: Yes
• Solar technology: Yes
• Mode switch welding/grinding: Yes
• Power supply: Solar cells
• Back-up battery: Yes
• Test switch: Yes
• Grinding mode: No
• Fill-in delay short/medium/long: Yes
• Battery level indicator: No
• Protection level setting DIN EN 4/9-13: Stepless
• Protection level setting sensitivity: Stepless
• Switch-on time at 22 °C: 0,00005 s
• Protection level darkened max.: DIN 13
• Brightening time short/medium/long: 0,3 ~ 0,9 s
• Protection level bright: DIN 4
• Protection level darkened min.: DIN 9
• Ultraviolet protection UV permanent: DIN 16
• Infrared protection IR permanent: DIN 16
• Helmet material polyamide/nylon: Yes
• Operating temperature: -5 to +55 °C
• Storage temperature: -20 to +70 °C
• Cassette size (WxHxS): 115 x 125 x 18 mm
• Weight: 0,47 kg

Scope of delivery:

1x Elmag Automatic Welding Shield FLAME
3x Faceplate outside
1x Faceplate inside
1x Color cardboard packaging