- Separate milk into cream and skim milk at home
- Centrifuges up to 130 liters of milk per hour
- Max. 12 liters capacity
- Longlife Motor with Slow Start Technology
- Quality product from Austria & 2 years manufacturer warranty
€1,299.00*
% €1,495.00* (13.11% saved)
Content:
1 Piece
Free shipping
Available in 3 days, delivery time 1-3 days
Buy this product to earn 128 loyalty points!
Product number:
26840
EAN:
9004195175988
Milky Milk centrifuge / Milk separator FJ 130 ERR LL
With a power of 70 watts, this milk centrifuge manages to separate 130 liters per hour of milk into cream and skim milk. The must-have if you want to process the cream into cheese, yogurt or butter afterwards.
This lucrative FJ 130 LL milk centrifuge helps you separate milk into cream and skim milk in the comfort of your own home. It is ideal for skimming cow's, goat's and sheep's milk as well as for home use or semi-professional users. As with most Milky brand equipment, the number, in this case 130, represents the capacity per hour. The FJ 130 LL milk centrifuge thus processes up to 130 liters of milk per hour. A strong, new "Longlife" motor without carbons guarantees an even longer service life. LEDs indicate the exact time to open the milk supply and thus the highest possible efficiency of the centrifuge. The new control system guarantees constant operation at approx. 8,500 rpm. The motor maintains this speed even in the event of fluctuations in the power supply.
The skim milk & cream outlet, the inlet vessel as well as the 10 liter whole milk vessel are made of almost indestructible, food-safe stainless steel and are very easy to clean. The drum, specially balanced at 0 point, and all parts in contact with the milk are made of food grade and anodized aluminum, easy to clean and hygienic. Two different types of drum plates (10 ribbed and 11 smooth) prevent the plates from sticking together. Cream thickness can be adjusted to approx. 8% to 12% with the cream screw, depending on the milk quality. Stable rubber feet, which are also suitable for table mounting, ensure vibration-free operation.
Milky Milk centrifuge at a glance:
- Simply separates milk into cream and skim milk
- Centrifuges up to 130 liters of milk per hour
- Professional milk centrifuge for home use
- Cream screw for adjusting the cream thickness between 8 % and 12 %
- 10 liter milk container made of food grade stainless steel
- With easy to clean cream & skim milk spout
- "Longlife" motor with "Slow Start" Technology
- Specially balanced drum at zero point with two types of drum plates
- LED light indicates the optimal time for start-up
- On-Off switch with light diode and waterproof rubber cover
- Unique fixing hook for the milk container
- Full electronic control
- Extremely easy to clean & hygienic
- Stable rubber feet ensure vibration-free operation
- Also suitable for table mounting
Tips:
Cow-warm milk between 30 °C and 35 °C is best suited for centrifugation. With the milk centrifuge, the milk is skimmed and the skim milk obtained can be further processed into cheese, curd or yogurt or used as drinking milk. Depending on the fat content of the milk and the setting of the cream screw, between 8 % and 12 % cream is obtained.
To produce butter, the pre-cooled cream is whipped in a butter machine specially designed for this purpose. With the matching yogurt & multi-purpose kettle, you can also use the cream to make your own fresh, delicious cheese, yogurt, curd, ricotta, juices and more.
Technical data:
- Dimensions article (LxBxH): 38 x 38 x 54 cm
- Dimensions packaging (LxBxH): 40 x 24 x 42 cm
- Operation: Electric
- Voltage: 230 V
- Power: 70 W
- Max. Hourly output: 130 l/h
- Min./Max. filling capacity: 2 l / 12 l
- Adjustment of cream thickness: 8 % - 12 %
- Number of drum plates: 21 (10 flat, 11 with hill)
- Speed: 8,500 rpm
- Material full milk/feed vessel & spouts: stainless steel
- Material drum/drum plate: Aluminum
- Weight netto: 4,5 kg
- Weight brutto: 5,4 kg
Scope of delivery:
1x Milky Milk centrifuge / Milk separator FJ 130 ERR LONGLIFE, 230 V
| Country of origin: | Austria |
|---|---|
| Power supply: | 230 Volt |
| Material: | stainless steel |
Login
Milky FJ 15 Pasteurizer Eco Mini
€589.00*
Milky Mini Pasteurizer FJ 15, 230 V
Have you always wanted to pasteurize, make cheese or make yogurt? Now you can do it simply and easily with the ECO Mini Pasterurizer from Milky.
With the Milky Pasteurizer you can turn cream into tasty cheese or yogurt in no time. The multi-purpose kettle is the perfect all-rounder for small businesses, direct marketers and the home. Made of durable stainless steel, this 15 liter cheese & yogurt maker can also pasteurize and sterilize fruit, fruit juices or the like. Besides treating milk & dairy products, the pasteurizer is also suitable for heating calf milk, re-liquefying honey, making honey wax, etc. True to the motto "small but mighty", the Mini Pasteurizer has been carefully developed in Austria, and constant quality controls ensure a remarkably high quality of workmanship.
The operation of the Milky Pasteurizer is child's play: the water temperature (up to max. 99 °C) is set according to the desired end product, at the same time the production time is indicated on the electronic control. Thanks to a 2,8 kW heating element, your cow's, sheep's or goat's milk is heated from approx. 4 °C to max. 90 °C germ-free in approx. 1 ¼ hours. The outer boiler is made of one piece and has a special internal insulation. The extra-thin walls and an electronic heating control ensure enormous energy and heating cost savings with the new LE effect (Low Energy Effect).
At a glance:
Make your own cheese, yogurt, fruit juices & dairy products
Ideal also as calf milk warmer, for re-liquefying honey, making honey wax, etc.
Multi-purpose boiler with 14 L filling volume
Electronic control with timer
Temperature adjustable between 4 °C and 100 °C
Double walled small pasteurizer for home use
Easy to clean & hygienic
Premium quality from Austria
Application:
Fasten outlet hose with a screw clamp.
Insert inlet tube into the hole on the edge.
Fill pasteurizer with water up to "MAX" mark.
Fill the milk container and place it in the pasteurizer.
Put the thermometer into the lid, fix it and fix the container with the help of the fixing hook.
Put the outlet tube into the sink and insert the plug.
Set temperature and time for pasteurization (room temperature 22 °C).
When the heating water reaches the set temperature, the pasteurizer keeps it for the set time.
When the time "0" is reached, the pasteurizer goes to stand-by and gives a short signal.
Connect the inlet hose to the water tap and turn on the cold water to cool down the milk.
After some time the milk is cooled down. The time for this depends on the water temperature.
Note: The term "cream" always refers to sweet whipped cream. There is also sour cream, which is cream with added lactic acid bacteria. This has a slightly sour taste. Crème fraîche and sour cream are higher fat varieties of sour cream.
Technical data:
Dimensions article (LxWxH): 32 x 32 x 52 cm.
Dimensions packaging (LxWxH): 37 x 37 x 56 cm
Voltage: 230 V
Cooling: Manual
LE effect: Yes
Mixer: No
Heating: Electric
Max. Medium temperature: 90 °C
Temperature setting: 4 - 100 °C
Time setting: 1 - 999 min.
Min./Max. filling capacity: 2 l / 14 l
Max. Capacity: 15 l
Heating power: 2,8 kW
Material: Stainless steel
Weight netto: 6 kg
Weight brutto: 7 kg
Scope of delivery:
1x Milky ECO Mini Pasteurizer, cheese and yogurt boiler FJ 15, 230 V
Milky Filling machine SGF 2 150-500
€7,123.78*
Milky Filling Machine SGF 2 150 - 500
The Milky filling machine supports farmers professionally in filling liquids. Ideally suited for direct marketing of dairy products.
Milk, yogurt (with fruit), fruit juices, tomato paste and cream products can be filled quickly and easily with our Milky filling machine. Up to 600 liters per hour can be filled or up to 1.200 cups per hour. Filling can be done in jars, cups, bottles & cartons.
The 2 filling cylinders allow an individual adjustment between 150 - 500 ml per filling cylinder. Thus, different quantities can be filled per nozzle. The filling capacity depends on the volume of the batch or the density of the liquid to be filled. You can determine the filling speed yourself, either by foot pedal or automatic filling. All parts of the filling machine that come into contact with the filling liquid are made of food-grade stainless steel, making them extremely easy to clean and hygienic.
At a glance:
Filling liquids in cups, jars, bottles & cartons
Filling capacity between 150 and 500 ml
Maximum 600 l or 1.200 cups per hour possible
2 Cylinders - 2 filling nozzles
Individually adjustable filling quantity per nozzle
With foot pedal or automatically adjustable filling speed
Multi-purpose device made of durable stainless steel
Easy to clean & hygienic
Application:
Connect mains plug
Connect compressor with hose (6 - 7 bar)
Set filling volume
Fill container with filling medium (milk, yoghurt, fruit juice etc.)
Place bottle under filling nozzle + press foot pedal briefly to activate machine
For easy cleaning of the filling machine fill water with non-aggressive cleaning agent into the container, run through the machine by means of automatic function and rinse several times.
Technical data:
Dimensions (LxWxH): 78 x 41.5 x 24.5 cm
Dimensions packing (LxWxH): 126 x 51 x 37 cm
Pressure: 4 to 6 bar ± 1%
Filling quantity adjustment: 150 - 500 ml
Filling cylinder: 2
Filling funnel: Ø 39 x 33,5 cm
Gross weight: 60 kg
Net weight: 52 kg
Material: Stainless steel
Max. Capacity Capacity hopper: 25 l
Max. Capacity Capacity/hour: 600 l/h, 1.200 cups
VPE: 1 Pcs/Pallet
Filling speed: Automatic or foot pedal
Scope of delivery:
1x Milky Filling machine SGF 2 150 - 500
Notice: Compressor with 300 liters / Minute line is not included, but is required.
%
Milky Pasteuriser, Cheese & Yoghurt Kettle FJ 100 PF
€8,999.00*
€9,695.00*
Milky Pasteurizer, cheese and yogurt kettle FJ 100 PF, 400 V
Whether in restaurants, alpine huts, hotels or direct marketers, the FJ 100 PF Pasteurizer for cheese & yogurt production convinces with easy operation and exceptional quality!
Produce fresh milk & cream products with the Milky multi-purpose FJ 100 PF Pasteurizer. With its 100 L capacity, the high-quality cheese, yogurt & multipurpose kettle is perfect for professional direct marketing of high-quality, homemade dairy products. The pasteurizer is not only suitable for milk treatment such as pasteurization, cheese production or yogurt production, but also as a calf milk warmer, for the production of fruit or fruit juices, honey wax and for the re-liquefaction of honey.
The special feature of this three-walled stainless steel boiler with a 90-liter capacity is its special design: The outer kettle is made of one piece, which avoids problems that can arise from welds. The insulation chamber has a wall thickness of 2.5 mm, thus offering the best insulation values and preventing heating of the outer wall and associated energy losses. The thin 1.2 mm wall between the second and third chambers enables very good heat transfer of the temperature of the heating water to the medium, thus saving high energy and heating costs (low energy effect). The special, electronic heating control ensures that the heating water temperature is only max. 15 °C higher than the medium temperature. For this reason, the deviation between display and medium temperature is max. +/- 1 °C, which also saves the energy and heating costs.
Very helpful is the water level control sensor, which shows the message "Please refill water" on the display, if the boiler has too little heating water (e.g.: due to escaped water vapor). If the device has an existing connection to the water pipe, pressing the "RESET" button will automatically refill heating water. In case of repeated water loss, an automatic STOP is performed to check the cause.
With the electronic control you can select up to 4 different programs. The temperature setting gives the possibility to set up to 4 temperatures from 5 °C to 94 °C, up to 4 cycle times can be programmed to 999 minutes. It is also possible to pre-program and automate several consecutive production processes, thus no presence is required. Manual intervention is nevertheless possible at any time.
Mode of operation:
The boiler heats up until the temperature control reaches the desired temperature, this is then maintained until the end of the cycle time. The process is terminated independently with an automatic shutdown. Automatic cooling by water exchange cools the medium to the desired temperature and the already pre-programmed next step of processing is started automatically. The agitator for the mixer operates at approx. 104 rpm and can be switched on or off at any time. At the end of the production process, the liquid product is discharged via the large DN 50 outlet.
At a glance:
For professional pasteurization, cheese & yogurt production
Three-walled 100 liter multifunctional kettle
Best insulation properties save energy & heating costs
Extremely good heat transfer from heating water to medium
Easy operation via control panel or MILKY APP
Setting of 4 cycles (temperature and time)
4 Program fuses on the control unit
Automatic cooling
Automatic stirrer made of stainless steel
Emergency stop switch
Complying with all hygiene standards (HACCP)
Underframe with or without castors
Vessel, outlet and base made of durable stainless steel
Technical data:
Dimensions article (LxWxH): 85 x 85 x 145 cm
Dimensions packing (LxWxH): 91 x 70 x 157 cm
Voltage: 400 V
Cooling: Automatic
Mixer: Yes
Max. Speed: 104 rpm
LE effect: Yes
Heating: Electric
Max. Medium temperature: 94 °C
Temperature setting: 5 - 94 °C
Time setting: 1 - 999 min.
Min./Max. filling capacity: 45 l / 90 l
Max. Capacity: 100 l
Heating capacity: 6 kW
Material: Stainless steel
Net weight: 48 kg
Scope of delivery:
1x Milky Pasteurizer, cheese & yogurt kettle FJ 100 PF, 400 V
%
Milky Midi Pasteurisator, Cheese & yoghurt kettle FJ 30
€1,099.00*
€1,199.00*
Milky Midi Pasteurizer, cheese and yogurt kettle FJ 30, 230V
Have you always wanted to pasteurize, make cheese or make yogurt? Now you can easily and foolproof with the Midi Pasterurizer from Milky. Ideal for small farm & home use.
The Milky Midi Pasteurizer FJ 30 is a great companion for making homemade fresh cheese, yogurt or cream products. Pasteurization turns cream into cheese and yogurt, the FJ 30 is also popular for making fruit & fruit juices, honey wax or as a calf milk warmer or for liquefying honey. The electric pasteurizer with 30 L stainless steel boiler can be used in private households, in small professional farms and in direct marketing. The Midi Pasteurizer is carefully developed in Austria, through constant quality controls a remarkably high processing quality is guaranteed.
The outer boiler of the cheese & yogurt boiler is made of one piece and has a special inner insulation. The extra-thin walls and an electronic heating control system provide enormous energy and heating cost savings with the new LE effect (Low Energy Effect). The practical electronic control makes it possible to set the water temperature (up to max. 100 °C - depending on the desired end product) and the desired pasteurization or production time. The 2.5 kW heating element heats the milk to max 90 °C, thus killing all bacteria. The temperature set on the electronics indicates the water temperature, not the medium temperature. Please check the temperature of the medium with an additional thermometer.
At a glance:
Make your own cheese, yogurt, fruit juices & dairy products
Ideal also as calf milk warmer, for re-liquefaction of honey, production of honey wax etc.
Multi-purpose kettle 30 L for professional use & home use
Electronic control
Individual time & water temperature setting
Temperature adjustable between 4 °C and 100 °C
Medium temperature up to 90 °C
Reset button for easy restart
Polyurethane mold insulation
Enormous energy & heating cost savings thanks to LE effect
Easy cleaning & hygienic
Austrian quality product
Cheese making instructions:
Cheese is made when milk turns sour and the solids separate from the whey. There are different types of cheese, but the production of all cheeses is very similar:
Preparation: The milk is pasteurized, except in the case of raw milk cheese making. The desired fat content is determined by adding or separating cream.
Thickening of the milk: Rennet or lactic acid bacteria (starter cultures) are added to the milk or both are combined to coagulate the milk. The so-called "Dickete" or "Gallerte" is formed.
Curd processing: Once the curd has reached the right firmness, it is cut with a cheese harp. The finer the curd, the more whey is deposited and the harder the finished cheese. To allow even more whey to escape, sometimes the curd is heated gently at the end.
Molding: When the desired consistency for the corresponding type of cheese has been achieved, the cheese is filled into the cheese molds typical for the type. The remaining whey is separated from the curd by pressing and draining.
Brine bath: A brine bath removes more water from the outer walls of the cheese, which promotes rind formation, intensifies the flavor and preserves the cheese naturally. Many solid cheeses also receive a protective layer of cheese wax.
Ripening develops the aroma typical of the variety - fresh cheese does not need to ripen. The type of ripening depends on the type of cheese. Depending on the variety, the cheese is also turned, brushed, rolled in herbs or treated with noble mold, for example.
Storage: The ideal, constant temperature and high humidity ARE important for cheese storage. Too cool or too warm storage and light can damage the quality and taste.
Technical data:
Dimensions (LxWxH): 40 x 40 x 50 cm
Voltage: 230 V
Cooling: Manual
Mixer: No
LE effect: Yes
Heating: Electric
Max. Medium temperature: 90 °C
Temperature setting: 4 - 100 °C
Time setting: 1 - 999 min.
Min./Max. filling capacity: 5 l / 29 l
Max. Capacity: 15 l
Heating power: 2,5 kW
Material: Stainless steel
Net weight: 7 kg
Scope of delivery:
1x Milky Midi Pasteurizer, cheese and yogurt kettle FJ 30, electric
%
Milky Butter machine FJ 32, electric
€2,999.00*
€3,599.00*
Milky Butter machine FJ 32 / 230 V, electric
With the electric butter maker you can make your own butter at home from whipped cream or milk and enjoy.
The electric Milky Butter machine FJ 32 / 230 V for professional use! Depending on the cream temperature and fat content of the milk, the Milky fj 32 requires between 20 and 35 minutes for a process. Fill 6 to 13 litres of cream into the 32 litre stainless steel container (max. up to the agitator shaft of the removable stainless steel agitator) and start churning.
Through the extra large viewing lid it is possible to watch the churning process in peace. The automatic safety stop when opening the plastic lid during operation prevents accidents. The multistage 230 V motor allows for shorter or longer buttering times depending on speed. With the separate drain tap the buttermilk is simply drained off at the end, the butter is washed and your high quality product is ready. All stainless steel parts are made of food grade stainless steel and therefore extremely easy to clean.
Overview:
Make your own butter easily
For 6 to 13 liters of cream
Depending on fat content & cream temperature per process 20-35 minutes
Buttering in 2 speed levels
Powerful motor for professional direct marketing
Visible lid to control the process
Automatic safety stop
Removable stainless steel agitator
Easy to clean & hygienic
Stainless steel drain cock for buttermilk
Utilization:
Making butter is very easy with the Milky Butter machine FJ32. Before using the Milky Buttermaker, make sure the buttermilk aperture in the bottom of the buttermaker is closed and the plastic lid is firmly on the housing. Gently press the lid onto the housing. Also make sure the rubber plug is inserted into the lid before starting the machine.
Preparing the cream for making butter is very important as this can affect the taste, flavour and quality of the butter. Ideally, you should use cream that is 2 - 3 days old and stored at 5 °C - 8 °C (in summer) or 8 °C - 10 °C (in winter) for churning. The cream is either processed directly with a butter churn or pasteurized with a pasteurizer before processing. Pasteurisation of the cream is recommended.
The pre-cooled cream is reheated to a temperature of 12 °C to 14 °C. The cream bowl of the butter churn may be filled to no more than the agitator. The longer the buttering time - the better the butter quality. The butter is ready in 20 to 35 minutes, depending on the speed.
After draining the buttermilk, the butter is washed with cold water. If the outlet tap is left open, the butter can already be pre-kneaded with the machine.
Then the butter is kneaded in portions with wet hands and washed again and again until the last bit of buttermilk has been kneaded out of the butter. The individual portions are filled into a wet butter model, it is important that there are no air holes. Then cool down the butter and churn it out of the butter model.
From 100 litres of milk or the 8 to 12 litres of cream, you get around 4 kg of butter and between 5 and 6 litres of buttermilk.
Technical data:
Article dimensions (LxWxH): 70 x 32 x 46 cm
Packaging dimensions (LxWxH): 82 x 33 x 47 cm
Electric: 230 Volt
Power: 250 W / 370 W
Filling quantity min/max: 6 litres / 13 litres
Percentage of butter: 32 - 42 %
Cream container: 32 litres
Working time per cycle: 20 to 35 min.
Mixer speed levels: 70, 140 rpm
Material: Stainless steel container, Plastic lid
Weight brutto: 27,1 kg
Weight netto: 25 kg
Scope of delivery:
1x Milky Butter machine FJ 32, electric